error in cadence simulation...

[server]

message unavailable

 

[Gurirnderpal Singh]

On Friday, March 26, 2010 at 12:12:30 PM UTC-4, Andrew Beckett wrote:

lokesh wrote, on 03/26/10 11:36:
Dear all,
I was trying to run a simple simulation in cadence Spectre. I got the
following error. Any idea what it could mean?.
/***********************
*Error* Errors encountered during simulation. The simulator run log
has not been generated.
Possible cause could be an invalid command line option for the version
of the simulator
specified in the userCmdLineOption field are supported for the
simulator.
Alternatively, run the simulator standalone using the runSimulation
file in the netlist
directory to know the exact cause of the error.
/***********************
Since I\'m new to schematic, I\'m not sure about the error. I also tried
running the netlist as said in the error message, but it didn\'t work(I
tried simulating both \'input.scs\' and \'runSimualtion\' file ).

The following is the error message i got when i tried to run the
simulation in the netlist directory
/**************************
/cad/tools/cadencetools/mmsim_6_1/tools/bin/spectre: line 180: 8906
Killed /cad/tools/cadencetools/mmsim_6_1/tools.lnx86/
spectre/bin/spectre input.scs

Thanks and regards,
Lokesh
It\'s most likely a problem with missing shared libraries.
Also, that is a rather old (and unsupported) version of MMSIM (assuming it
really is MMSIM61).
If you just run \"./runSimulation\" what is the error?
Regards,
Andrew.

Hi,
After running ./runSimulation, I am getting following error please help me
/CMC/tools/cadence/MMSIM13.11.480_lnx86/tools/spectre/bin/64bit/spectre: error while loading shared libraries: libreadline.so.5: cannot open shared object file: No such file or directory