error about synthesis and placement

[Nilesh]

hello all
i am having following problem.
i am using PKS for synthesis and place/route my design.
i am using VTVTlib25 0.25 micron design kit.i am reading all my vhdl
files and using do_build_generic for netlist creation.but when i read
technology files using folloing commands,

read_tlf vtvtlib25.tlf
read_lef vtvtlib25.lef

i get following error messages:

==> ERROR: capacitance for routing layer metal1 is not defined
<PLC-503>.
Info: <PLC-501>.
Info: Qplace failed. <PLC-889>.
Overall P&R CPU time = 1.540000 seconds. <PLC-530>.
Command _do_place finished at Wed Apr 7 07:41:05 2004
using 0:0:2 Real time. Current peak memory: 113.834MB


vtvtlib25 has .lef files supplied but did not have .tlf files supplied
with it,so i had to convert them using syn2tlf.
(vtvt have synopsys .lib files supplied with it )
is this error becoz of this conversion???
did i miss something in the conversion ??
as NCSU does mentions about making some changes in the techfile.
please help me through this.

thanks
nilesh

 

[ka]

On 22 Apr 2004 02:07:19 -0700, nilesh_study2003@yahoo.com (Nilesh)
wrote:

hello all
i am having following problem.
i am using PKS for synthesis and place/route my design.
i am using VTVTlib25 0.25 micron design kit.i am reading all my vhdl
files and using do_build_generic for netlist creation.but when i read
technology files using folloing commands,

read_tlf vtvtlib25.tlf
read_lef vtvtlib25.lef

i get following error messages:

==> ERROR: capacitance for routing layer metal1 is not defined
PLC-503>.
Info: <PLC-501>.
Info: Qplace failed. <PLC-889>.
Overall P&R CPU time = 1.540000 seconds. <PLC-530>.
Command _do_place finished at Wed Apr 7 07:41:05 2004
using 0:0:2 Real time. Current peak memory: 113.834MB


vtvtlib25 has .lef files supplied but did not have .tlf files supplied
with it,so i had to convert them using syn2tlf.
(vtvt have synopsys .lib files supplied with it )
is this error becoz of this conversion???
did i miss something in the conversion ??
as NCSU does mentions about making some changes in the techfile.
please help me through this.

thanks
nilesh

I think the actual error is your best guide. It says "capacitance for
routing layer metal1 is not defined". I think you should open the LEF
file and see if it has any capacitances defined. If not, you can add
dummy ones or get some estimate from you tech docs.