Emerson TV: MS1980R no raster

J

Jerry Chanderpaul

Guest
It was a while back that I was working on this TV but going from memory . I
notice an IC going in series to the flyback input,135 volts ,its a 2 pin IC
and it seems to be open , there is no resistance across it , can this be a
diode or some kind of fuse resistor? This IC is white in color and its a 2
pin, location on the board is ICP401. I took out this IC and I cant find it
anymore, I need to know whats written on the IC and where I can buy this IC,
.. I do know I can buy it at Fox Electronics for $5 ,but the shipping is
going to be expensive cause I am living in Toronto, Canada. Also is this a
common failure for this TV or is there some other problem leading to no
raster. Does anyone have a copy of the schematics?. Any help would be
appreciated

Thanks
Jerry
 
On Sat, 27 Sep 2003 21:13:10 GMT, "Jerry Chanderpaul"
<jerrych@rogers.com> wrote:

It was a while back that I was working on this TV but going from memory . I
notice an IC going in series to the flyback input,135 volts ,its a 2 pin IC
and it seems to be open , there is no resistance across it , can this be a
diode or some kind of fuse resistor? This IC is white in color and its a 2
pin, location on the board is ICP401. I took out this IC and I cant find it
anymore, I need to know whats written on the IC and where I can buy this IC,
. I do know I can buy it at Fox Electronics for $5 ,but the shipping is
going to be expensive cause I am living in Toronto, Canada. Also is this a
common failure for this TV or is there some other problem leading to no
raster. Does anyone have a copy of the schematics?. Any help would be
appreciated

Thanks
Jerry
Click to expand...
It's likely an IC protector, very much like a fuse. $5 is a ridiculous
price for one (unless it includes shipping). Global Semiconductors,
near where you live, would likely charge under $1. It's a
garden-variety part, not a specialty part, if I am correct.

Tom
 
Thanks Tom, I totally forgot about Global Semi. , I will give the a call on
Monday, I also found that the T101 is a common component to go on this TV
set.

Jerry
"Tom MacIntyre" <tom__macintyre@hotmail.com> wrote in message
news:mn2cnvsh953e1lrrloc96dmgmdtbjt9204@4ax.com...
On Sat, 27 Sep 2003 21:13:10 GMT, "Jerry Chanderpaul"
jerrych@rogers.com> wrote:

It was a while back that I was working on this TV but going from memory .
I
notice an IC going in series to the flyback input,135 volts ,its a 2 pin
IC
and it seems to be open , there is no resistance across it , can this be
a
diode or some kind of fuse resistor? This IC is white in color and its a
2
pin, location on the board is ICP401. I took out this IC and I cant find
it
anymore, I need to know whats written on the IC and where I can buy this
IC,
. I do know I can buy it at Fox Electronics for $5 ,but the shipping is
going to be expensive cause I am living in Toronto, Canada. Also is this
a
common failure for this TV or is there some other problem leading to no
raster. Does anyone have a copy of the schematics?. Any help would be
appreciated

Thanks
Jerry


It's likely an IC protector, very much like a fuse. $5 is a ridiculous
price for one (unless it includes shipping). Global Semiconductors,
near where you live, would likely charge under $1. It's a
garden-variety part, not a specialty part, if I am correct.

Tom
Click to expand...
 
no luck at global semiconductors....is there another place i can try?

"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:G3ndb.23757$3r1.6437@news02.bloor.is.net.cable.rogers.com...
It was a while back that I was working on this TV but going from memory .
I
notice an IC going in series to the flyback input,135 volts ,its a 2 pin
IC
and it seems to be open , there is no resistance across it , can this be a
diode or some kind of fuse resistor? This IC is white in color and its a 2
pin, location on the board is ICP401. I took out this IC and I cant find
it
anymore, I need to know whats written on the IC and where I can buy this
IC,
. I do know I can buy it at Fox Electronics for $5 ,but the shipping is
going to be expensive cause I am living in Toronto, Canada. Also is this a
common failure for this TV or is there some other problem leading to no
raster. Does anyone have a copy of the schematics?. Any help would be
appreciated

Thanks
Jerry
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top