Electronic Technician Casual Part time starter position avai

Our business we are involved in Marketing and Solutions of remote monitoring and control equipment.
We are looking for a person to come in for .5 to 2 days a week as required.
The role will develop overtime into a full time position.
The initial tasks will be
Diagnose and repair equipment to board level
Help customers with configuration over the phone.
Assist in Radio path Checks.
Build small enclosures.
Configure products to customers requirements.

We will of course train the person to do the above.

The right person will have some basic understanding of electronics or electrical.
E.g. DC fundamentals and DC transistor theory.

We see a great benefit for this person to have some knowledge of IP networks for the future. As a lot of our SCADA equipment is IP based.
This role would probably suit someone who is around 6 months into their course or further.
As much as possible we would try and fit the hours around there TAFE contact hours.
This role could develop into a full time position for the right person.
Mark

 

[Phil Allison]

<markb@edac.com.au>

Our business we are involved in Marketing and Solutions of remote
monitoring and control equipment.

(snip)


** The very fist thing anyone considering your offer will need to know is -

WHERE THE FUCK ARE YOU ??

Wot a wanker.



.... Phil

 

[Rodwell]

On 03/06/2013 05:42, Phil Allison wrote:

markb@edac.com.au

Our business we are involved in Marketing and Solutions of remote
monitoring and control equipment.

(snip)


** The very fist thing anyone considering your offer will need to know is -

WHERE THE FUCK ARE YOU ??

Wot a wanker.



.... Phil

Look at the email address Phil... as part of the selection criteria, I'd
say you won't be getting a look in!

 

[Phil Allison]

"Rodwell"
Phil Allison wrote:

markb@edac.com.au

Our business we are involved in Marketing and Solutions of remote
monitoring and control equipment.

(snip)


** The very fist thing anyone considering your offer will need to know
s -

WHERE THE FUCK ARE YOU ??

Wot a wanker.


Look at the email address ....

** Looked like the name of some ISP to me.

YOU did NOT say "EDAC" was your company name or part of it.

YOU did NOT even hint at your location.

YOU did NOT post your company web site's address.

YOU did NOT indicate how to enquire about the position.

But you DID post entirely in the Royal Plural.

WE are NOT amused ................

How fucking pompous.




.... Phil

 

[Rodwell]

On 03/06/2013 08:38, Phil Allison wrote:

"Rodwell"
Phil Allison wrote:
markb@edac.com.au

Our business we are involved in Marketing and Solutions of remote
monitoring and control equipment.

(snip)


** The very fist thing anyone considering your offer will need to know
s -

WHERE THE FUCK ARE YOU ??

Wot a wanker.


Look at the email address ....


** Looked like the name of some ISP to me.

YOU did NOT say "EDAC" was your company name or part of it.

YOU did NOT even hint at your location.

YOU did NOT post your company web site's address.

YOU did NOT indicate how to enquire about the position.

But you DID post entirely in the Royal Plural.

WE are NOT amused ................

How fucking pompous.




.... Phil

Perhaps you should see if your local library or council run computer
classes, quite a few of them do. Here is the link for you. Just point
your mouse at it and click on the left button.

edac.com.au

 

[Rodwell]

On 02/06/2013 04:56, markb@edac.com.au wrote:

Our business we are involved in Marketing and Solutions of remote monitoring and control equipment.
We are looking for a person to come in for .5 to 2 days a week as required.
The role will develop overtime into a full time position.
The initial tasks will be
Diagnose and repair equipment to board level
Help customers with configuration over the phone.
Assist in Radio path Checks.
Build small enclosures.
Configure products to customers requirements.

We will of course train the person to do the above.

The right person will have some basic understanding of electronics or electrical.
E.g. DC fundamentals and DC transistor theory.

We see a great benefit for this person to have some knowledge of IP networks for the future. As a lot of our SCADA equipment is IP based.
This role would probably suit someone who is around 6 months into their course or further.
As much as possible we would try and fit the hours around there TAFE contact hours.
This role could develop into a full time position for the right person.
Mark

Sounds like a good starting role for a young tech. Hope you find someone.

 

[Phil Allison]

"Rodwell = Ratbag "

Perhaps you should see if your local library or council run computer
classes, quite a few of them do. Here is the link for you. Just point your
mouse at it and click on the left button.

edac.com.au

** The whole issue is because such a link was NOT posted.

You are a context shifting, bullshitting ass.

FUCK OFF !!!!!!!!!!!!!!!!!!

 

[Rheilly Phoull]

On 03/06/13 21:14, Rodwell wrote:

On 03/06/2013 08:38, Phil Allison wrote:
"Rodwell"
Phil Allison wrote:
markb@edac.com.au

Our business we are involved in Marketing and Solutions of remote
monitoring and control equipment.

(snip)


** The very fist thing anyone considering your offer will need to know
s -

WHERE THE FUCK ARE YOU ??

Wot a wanker.


Look at the email address ....


** Looked like the name of some ISP to me.

YOU did NOT say "EDAC" was your company name or part of it.

YOU did NOT even hint at your location.

YOU did NOT post your company web site's address.

YOU did NOT indicate how to enquire about the position.

But you DID post entirely in the Royal Plural.

WE are NOT amused ................

How fucking pompous.




.... Phil




Perhaps you should see if your local library or council run computer
classes, quite a few of them do. Here is the link for you. Just point
your mouse at it and click on the left button.

edac.com.au



mebbe you should check on the courses too, mainly website addresses for

a start.

 

[geoff]

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:b14r7tFnlpkU1@mid.individual.net...

"Rodwell = Ratbag "

Perhaps you should see if your local library or council run computer
classes, quite a few of them do. Here is the link for you. Just point
your mouse at it and click on the left button.

edac.com.au


** The whole issue is because such a link was NOT posted.

You are a context shifting, bullshitting ass.

FUCK OFF !!!!!!!!!!!!!!!!!!

I guess you might not get the job phil ....

geoff

 

[Phil Allison]

"geoff" <geoff@nospampaf.co.nz>

I guess you might not get the job phil ....

** There is no job offer here, just a trap for some teenager to get him ( or
herself ) thoroughly exploited.



.... Phil

 

[atec77]

On 10/06/2013 6:45 PM, Phil Allison wrote:

"geoff" <geoff@nospampaf.co.nz


I guess you might not get the job phil ....



** There is no job offer here, just a trap for some teenager to get him ( or
herself ) thoroughly exploited.



... Phil



Ah yes so you know about exploiting young men don't you philthy

--









X-No-Archive: Yes

 

[Rodwell]

On 10/06/2013 4:48 PM, atec77 wrote:

On 10/06/2013 6:45 PM, Phil Allison wrote:
"geoff" <geoff@nospampaf.co.nz


I guess you might not get the job phil ....



** There is no job offer here, just a trap for some teenager to get
him ( or
herself ) thoroughly exploited.



... Phil



Ah yes so you know about exploiting young men don't you philthy

Eeeew, that's a bit hard to swallow....
;