Guest
LM1882-RCM LM1882-RCN LM1882-R LM1882-RCN LC662306A LC662308A
MAX186CMJP MAX280MJA datasheet and pdf check from
http://www.chinaicmart.com/series-LC6/LC662104A.html
Overview
The LC662104A, LC662106A, and LC662108A are 4-bit CMOS
microcontrollers that integrate on a single chip all the functions
required in a special-purpose telephone controller, including ROM,
RAM, I/O ports, a serial interface, a DTMF generator, timers, and
interrupt functions. These microcontrollers are available in a 30-pin
package.
Features and Functions
On-chip ROM capacities of 4, 6, and 8 kilobytes, and an on-chip RAM
capacity of 384 ´ 4 bits.
Fully supports the LC66000 Series common instruction set (128
instructions). (The special-purpose instructions for TM1 and SI/01 are
disabled.)
I/O ports: 24 pins
DTMF generator
This microcontroller incorporates a circuit that can generate two sine
wave outputs, DTMF output.
8-bit serial interface: one circuit
Instruction cycle time: 0.95 to 10 ľs (at 3.0 to 5.5 V)
Powerful timer functions and prescalers
Time limit timer, event counter, pulse width
measurement, and square wave output using a 12-bit timer.
Time base function using a 12-bit prescaler.
Powerful interrupt system with 6 interrupt factors and 6 interrupt
vector locations.
External interrupts: 3 factors/3 vector locations
Internal interrupts: 3 factors/3 vector locations
Flexible I/O functions
Selectable options include 20-mA drive outputs, pull-up and open drain
circuits.
Optional runaway detection function (watchdog timer)
8-bit I/O functions
Power saving functions using halt and hold modes.
Packages: DIP30SD, MFP30S
Evaluation ICs: LC665099 (evaluation chip) + EVA86K- ECB662500
LC66E2108(on-chip EPROM microcontroller)
MAX186CMJP MAX280MJA datasheet and pdf check from
http://www.chinaicmart.com/series-LC6/LC662104A.html
Overview
The LC662104A, LC662106A, and LC662108A are 4-bit CMOS
microcontrollers that integrate on a single chip all the functions
required in a special-purpose telephone controller, including ROM,
RAM, I/O ports, a serial interface, a DTMF generator, timers, and
interrupt functions. These microcontrollers are available in a 30-pin
package.
Features and Functions
On-chip ROM capacities of 4, 6, and 8 kilobytes, and an on-chip RAM
capacity of 384 ´ 4 bits.
Fully supports the LC66000 Series common instruction set (128
instructions). (The special-purpose instructions for TM1 and SI/01 are
disabled.)
I/O ports: 24 pins
DTMF generator
This microcontroller incorporates a circuit that can generate two sine
wave outputs, DTMF output.
8-bit serial interface: one circuit
Instruction cycle time: 0.95 to 10 ľs (at 3.0 to 5.5 V)
Powerful timer functions and prescalers
Time limit timer, event counter, pulse width
measurement, and square wave output using a 12-bit timer.
Time base function using a 12-bit prescaler.
Powerful interrupt system with 6 interrupt factors and 6 interrupt
vector locations.
External interrupts: 3 factors/3 vector locations
Internal interrupts: 3 factors/3 vector locations
Flexible I/O functions
Selectable options include 20-mA drive outputs, pull-up and open drain
circuits.
Optional runaway detection function (watchdog timer)
8-bit I/O functions
Power saving functions using halt and hold modes.
Packages: DIP30SD, MFP30S
Evaluation ICs: LC665099 (evaluation chip) + EVA86K- ECB662500
LC66E2108(on-chip EPROM microcontroller)