Easytrax/Autotrax Question

C

Chris B.

Guest
I am just getting familiar with Autotrax and have a problem. After
placing several pads, they disappear again when I move the mouse, or
refresh the drawing ('END' key). Am I missing something?
 
"Chris B." <chb07@yahoo.com> wrote
I am just getting familiar with Autotrax and have a problem. After
placing several pads, they disappear again when I move the mouse, or
refresh the drawing ('END' key). Am I missing something?
Click to expand...
That tends to happen when you have the layer on which you
are placing the pads switched off - they appear until you
redraw the screen, then disappear. Type "S" "T"
(Setup, Toggle Layers) and see if the layers you want are ON.
Turn on Board Layer, Multi-Layer, Top, Bottom, (atleast).

You can find some more on this package at my website:
http://www.airborn.com.au/layout/easytrax.html
 
Problem solved, Multi-Layer was turned off. What benefit brings it to
turn the Multi-Layer off anyway? Could not find explanation in any
docs.
Thanks.

"Apollo" <z52723@gottaremovethis.airborn.com.au> wrote in message news:<E6dZb.1841$KS1.64498@nasal.pacific.net.au>...
"Chris B." <chb07@yahoo.com> wrote
I am just getting familiar with Autotrax and have a problem. After
placing several pads, they disappear again when I move the mouse, or
refresh the drawing ('END' key). Am I missing something?

That tends to happen when you have the layer on which you
are placing the pads switched off - they appear until you
redraw the screen, then disappear. Type "S" "T"
(Setup, Toggle Layers) and see if the layers you want are ON.
Turn on Board Layer, Multi-Layer, Top, Bottom, (atleast).

You can find some more on this package at my website:
http://www.airborn.com.au/layout/easytrax.html
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top