EAGLE CADSOFT NEW USER GROUP ON YAHOO

W

Wayne at NTL

Guest
Hi All

I have just setup a new user group on yahoo. I am hoping that I
can encurrage user to contribute programs, cad, libraries and tips for all
Eagle users.

Please, join today it is Free



http://groups.yahoo.com/group/eaglecad/
 
Wayne at NTL <mail@wlawson.com> wrote:
: Hi All

: I have just setup a new user group on yahoo. I am hoping that I
: can encurrage user to contribute programs, cad, libraries and tips for all
: Eagle users.

: Please, join today it is Free



: http://groups.yahoo.com/group/eaglecad/

What's the sense of setting another group? The newsserver at news.cadsoft.de
isn't enough for you?

Bye

--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de

Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
 
Uwe Bonnes wrote:

Wayne at NTL <mail@wlawson.com> wrote:
: Hi All

: I have just setup a new user group on yahoo. I am hoping
: that I
: can encurrage user to contribute programs, cad, libraries and tips for
: all Eagle users.

: Please, join today it is Free



: http://groups.yahoo.com/group/eaglecad/

What's the sense of setting another group? The newsserver at
news.cadsoft.de isn't enough for you?

Bye
Click to expand...
No. My news server does not cary it.

Ian
 
Ian Bell <ian@nowhere.com> wrote in news:bv4d99$qfr$2@news.ukfsn.org:

Uwe Bonnes wrote:

Wayne at NTL <mail@wlawson.com> wrote:
: Hi All

: I have just setup a new user group on yahoo. I am
hoping
: that I
: can encurrage user to contribute programs, cad, libraries and tips
for
: all Eagle users.

: Please, join today it is Free



: http://groups.yahoo.com/group/eaglecad/

What's the sense of setting another group? The newsserver at
news.cadsoft.de isn't enough for you?

Bye


No. My news server does not cary it.

Ian
Click to expand...
No, Its on the (free access) newsserver at
news.cadsoft.de
 
On Mon, 26 Jan 2004 21:26:30 +0000 (UTC) in sci.electronics.cad, Uwe
Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> was alleged to have
written:
What's the sense of setting another group? The newsserver at news.cadsoft.de
isn't enough for you?
Click to expand...
What's the sense of setting up another newsserver? sci.electronics.cad
isn't enough for you? There are Eagle questions once a week or so,
certainly not an overload to justify another server.

People who set up "their own" groups hurt us all by fragmenting the
discussion.
 
Wayne at NTL wrote:

Hi All

I have just setup a new user group on yahoo. I am hoping that I
can encurrage user to contribute programs, cad, libraries and tips for all
Eagle users.
Click to expand...
Eagle must be crap - it needs at least two groups to help people use it
properly. :cool:

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html
 
"Leon Heller" <aqzf13@dsl.pipex.com> schrieb im Newsbeitrag
news:4016d3a5$0$2429$cc9e4d1f@news.dial.pipex.com...
Wayne at NTL wrote:

Hi All

I have just setup a new user group on yahoo. I am hoping
that I
can encurrage user to contribute programs, cad, libraries and tips for
all
Eagle users.

Eagle must be crap - it needs at least two groups to help people use it
properly. :cool:
Click to expand...
Hello Leon,
you have made the wrong conclusion.
EAGLE is so easy to use, that even people having no clue of CAD can use it.
The other fact is that there are properly x times more user of EAGLE
than of most other PCB-CAD programs.

Best Regards,
Helmut
 
"David Harmon" <source@netcom.com> wrote in message
news:404fcaa9.131636087@news.west.earthlink.net...
On Mon, 26 Jan 2004 21:26:30 +0000 (UTC) in sci.electronics.cad, Uwe
Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> was alleged to have
written:
What's the sense of setting another group? The newsserver at
news.cadsoft.de
isn't enough for you?

What's the sense of setting up another newsserver? sci.electronics.cad
isn't enough for you? There are Eagle questions once a week or so,
certainly not an overload to justify another server.
Click to expand...
Different news servers carry different groups, and Google does not currently
archive the eagle support groups, As cadsfot run this dedicated newserver
they have the complete archives running back for a couple of years.

But perhaps you actually meant why have a seperate group (from se.cad)
rather than newserver?

The traffic on the dedicated Eagle news groups is probably about 20-30
messages a day. Its is also far easier to search a dedicated group for
common probs and their solution without having to wade through similar
topics that may be totally unrelated to this particular software package.
All in all a very good thing, and the majority of people here probably
aren't interested in these messages anyway... you may note that in general
the answers to queries about eagle point people to the dedicated groups.

cheeers

David

People who set up "their own" groups hurt us all by fragmenting the
discussion.
Click to expand...
Different groups for different software packages is not necessarily a bad
thing if they have the traffic to support them, having multiple groups for
one package on the other hand is not good. Hence why this yahoo group is a
crap idea.
Then again the dickheads who use a cracked copy of eagle generally get a
hard time on the official eagle newsgroups, perhaps they are the people who
are interested in a seperate group.

cheers

David
 
Leon Heller wrote:

Wayne at NTL wrote:

Hi All

I have just setup a new user group on yahoo. I am hoping
that I
can encurrage user to contribute programs, cad, libraries and tips for
all Eagle users.

Eagle must be crap - it needs at least two groups to help people use it
properly. :cool:

Leon
Click to expand...
Or it has a lot of highly intelligent users who often think of questions
about it.

Ian
 
"Helmut Sennewald" <HelmutSennewald@t-online.de> wrote in message news:<bv6kkk$qph$02$1@news.t-online.com>...
you have made the wrong conclusion.
EAGLE is so easy to use, that even people having no clue of CAD can use it.
The other fact is that there are properly x times more user of EAGLE
than of most other PCB-CAD programs.
Click to expand...
Eagle is so cheap, that even people having no clue of CAD can use it.

Eagle may very well be sufficient for simple boards.

--a
 
Or, you could be behind a big company firewall like I am. No news
traffic is allowed over the firewall. Only the company news server is
available - with, of course, a very limited selection of newsgroups

Urb

David Harmon wrote:

On Mon, 26 Jan 2004 21:26:30 +0000 (UTC) in sci.electronics.cad, Uwe
Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> was alleged to have
written:

What's the sense of setting another group? The newsserver at news.cadsoft.de
isn't enough for you?


What's the sense of setting up another newsserver? sci.electronics.cad
isn't enough for you? There are Eagle questions once a week or so,
certainly not an overload to justify another server.

People who set up "their own" groups hurt us all by fragmenting the
discussion.
Click to expand...

_______________________________________________________________________________
Posted Via Uncensored-News.Com - Accounts Starting At $6.95 - http://www.uncensored-news.com
<><><><><><><> The Worlds Uncensored News Source <><><><><><><><>
 
FYI, the Yahoo! group is: http://groups.yahoo.com/group/eaglecad/
Bryan

"Paul Urbanus" <urbpublic@hotmail.com> wrote in message
news:4020731d$1_5@news.uncensored-news.com...
Or, you could be behind a big company firewall like I am. No news
traffic is allowed over the firewall. Only the company news server is
available - with, of course, a very limited selection of newsgroups

Urb

David Harmon wrote:

On Mon, 26 Jan 2004 21:26:30 +0000 (UTC) in sci.electronics.cad, Uwe
Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> was alleged to have
written:

What's the sense of setting another group? The newsserver at
news.cadsoft.de
isn't enough for you?


What's the sense of setting up another newsserver? sci.electronics.cad
isn't enough for you? There are Eagle questions once a week or so,
certainly not an overload to justify another server.

People who set up "their own" groups hurt us all by fragmenting the
discussion.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top