Dynamic RFID tag chip ???

[Robert Lacoste]

Hi,
For a specific project I am looking for a RFID active tag chip, but with
both contactless and wired connectivity.

Basically I want to design a RFID tag, but with an on-board microcontroller
which should be able to change the content of the RFID tag based on external
events, through a I2C link or similar. Do you know products or chips that
could implement this functionnality ?

Frequency range probably in the 13MHz or 860MHz bands.

Many thanks,
Robert Lacoste
www.alciom.com
email : rlacoste and the same domain name...

 

[Gary Tait]

Whereas On Wed, 8 Oct 2003 18:28:15 +0200, "Robert Lacoste"
<see.www.alciom.com.for.email.adress@nospam.com> scribbled:
, I thus relpy:

Hi,
For a specific project I am looking for a RFID active tag chip, but with
both contactless and wired connectivity.

Basically I want to design a RFID tag, but with an on-board microcontroller
which should be able to change the content of the RFID tag based on external
events, through a I2C link or similar. Do you know products or chips that
could implement this functionnality ?

Frequency range probably in the 13MHz or 860MHz bands.

Many thanks,
Robert Lacoste
www.alciom.com
email : rlacoste and the same domain name...

I doubt it, you'd need a lot of power to write, unless it is a battery
powered tag.
I'd use either a straight serial number, with the dynamic data
pertaining to the tagged object stored in a database on a PC
somewhere, or a contact storage device.
--
Gary J. Tait . Email is at yahoo.com ; ID:classicsat

 

[Robert Lacoste]

Many thaks for all your replies. In the mean time I'vee found a quite
perfect solution from Atmel, so if you are interested here it is :
AT88RF001. It's a 13.56MHz RFID tag, accessing an external EEPROM through a
synchronous serial port. So no issue to use a microprocessor emulating the
eeprom. Anyone having an experience with it ? Another candidate, also from
Atmel, seems to be the AT24RF08 : an eeprom with both RFID tag interface
(125KHz) and external I2C port.

Friendly,

Robert Lacoste - ALCIOM : The mixed signals experts
http://www.alciom.com


"Gary Tait" <seesig@xxx.yyy> a écrit dans le message de
news9cbovgsn5ooeqld0pbrgosp22ibq7to91@4ax.com...

Whereas On Wed, 8 Oct 2003 18:28:15 +0200, "Robert Lacoste"
see.www.alciom.com.for.email.adress@nospam.com> scribbled:
, I thus relpy:
Hi,
For a specific project I am looking for a RFID active tag chip, but with
both contactless and wired connectivity.

Basically I want to design a RFID tag, but with an on-board
microcontroller
which should be able to change the content of the RFID tag based on
external
events, through a I2C link or similar. Do you know products or chips that
could implement this functionnality ?

Frequency range probably in the 13MHz or 860MHz bands.

Many thanks,
Robert Lacoste
www.alciom.com
email : rlacoste and the same domain name...


I doubt it, you'd need a lot of power to write, unless it is a battery
powered tag.
I'd use either a straight serial number, with the dynamic data
pertaining to the tagged object stored in a database on a PC
somewhere, or a contact storage device.
--
Gary J. Tait . Email is at yahoo.com ; ID:classicsat

 

[Franc Zabkar]

On Fri, 10 Oct 2003 08:06:54 +0200, "Robert Lacoste"
<see.www.alciom.com.for.email.adress@nospam.com> put finger to
keyboard and composed:

Many thaks for all your replies. In the mean time I'vee found a quite
perfect solution from Atmel, so if you are interested here it is :
AT88RF001. It's a 13.56MHz RFID tag, accessing an external EEPROM through a
synchronous serial port. So no issue to use a microprocessor emulating the
eeprom. Anyone having an experience with it ? Another candidate, also from
Atmel, seems to be the AT24RF08 : an eeprom with both RFID tag interface
(125KHz) and external I2C port.

FWIW, the AT24RF08 is used by IBM in their Thinkpads.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.