W
Wond
Guest
<https://annex.omeclk.com/portal/wts/
ugmcnr%7CfvRaqvFDcyTF6wBFvwqfDtrDA6A1kh4a>
ugmcnr%7CfvRaqvFDcyTF6wBFvwqfDtrDA6A1kh4a>
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
S
server
Guest
On Thu, 16 Jul 2020 14:56:28 -0000 (UTC), Wond <lost@the.ether.net>
wrote:
We had an n/c PCB milling thing. It was a pain to use, so we got rid
of it. It was hard to do two sides, no mask, no plating, no vias. If I
can\'t Dremel and use SMT adapters, I just order a few real 4-layer
boards, plated, ENIG, solder masked, silkscreened, quick-turn, easy.
Our Tormach n/c mill can do PCBs, but again it\'s a nuisance.
https://www.dropbox.com/s/ggh4vldypxgr6lz/Z480_Fixture_1.jpg?raw=1
That got re-done as a proper 4-layer PC board.
https://www.dropbox.com/s/802vl4wqj26u7pq/T_Pogos.jpg?raw=1
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard
wrote:
https://annex.omeclk.com/portal/wts/
ugmcnr%7CfvRaqvFDcyTF6wBFvwqfDtrDA6A1kh4a
We had an n/c PCB milling thing. It was a pain to use, so we got rid
of it. It was hard to do two sides, no mask, no plating, no vias. If I
can\'t Dremel and use SMT adapters, I just order a few real 4-layer
boards, plated, ENIG, solder masked, silkscreened, quick-turn, easy.
Our Tormach n/c mill can do PCBs, but again it\'s a nuisance.
https://www.dropbox.com/s/ggh4vldypxgr6lz/Z480_Fixture_1.jpg?raw=1
That got re-done as a proper 4-layer PC board.
https://www.dropbox.com/s/802vl4wqj26u7pq/T_Pogos.jpg?raw=1
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard
S
server
Guest
On Thu, 16 Jul 2020 14:56:28 -0000 (UTC), Wond <lost@the.ether.net>
wrote:
We had an n/c PCB milling thing. It was a pain to use, so we got rid
of it. It was hard to do two sides, no mask, no plating, no vias. If I
can\'t Dremel and use SMT adapters, I just order a few real 4-layer
boards, plated, ENIG, solder masked, silkscreened, quick-turn, easy.
Our Tormach n/c mill can do PCBs, but again it\'s a nuisance.
https://www.dropbox.com/s/ggh4vldypxgr6lz/Z480_Fixture_1.jpg?raw=1
That got re-done as a proper 4-layer PC board.
https://www.dropbox.com/s/802vl4wqj26u7pq/T_Pogos.jpg?raw=1
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard
wrote:
https://annex.omeclk.com/portal/wts/
ugmcnr%7CfvRaqvFDcyTF6wBFvwqfDtrDA6A1kh4a
We had an n/c PCB milling thing. It was a pain to use, so we got rid
of it. It was hard to do two sides, no mask, no plating, no vias. If I
can\'t Dremel and use SMT adapters, I just order a few real 4-layer
boards, plated, ENIG, solder masked, silkscreened, quick-turn, easy.
Our Tormach n/c mill can do PCBs, but again it\'s a nuisance.
https://www.dropbox.com/s/ggh4vldypxgr6lz/Z480_Fixture_1.jpg?raw=1
That got re-done as a proper 4-layer PC board.
https://www.dropbox.com/s/802vl4wqj26u7pq/T_Pogos.jpg?raw=1
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard
S
server
Guest
On Thu, 16 Jul 2020 14:56:28 -0000 (UTC), Wond <lost@the.ether.net>
wrote:
We had an n/c PCB milling thing. It was a pain to use, so we got rid
of it. It was hard to do two sides, no mask, no plating, no vias. If I
can\'t Dremel and use SMT adapters, I just order a few real 4-layer
boards, plated, ENIG, solder masked, silkscreened, quick-turn, easy.
Our Tormach n/c mill can do PCBs, but again it\'s a nuisance.
https://www.dropbox.com/s/ggh4vldypxgr6lz/Z480_Fixture_1.jpg?raw=1
That got re-done as a proper 4-layer PC board.
https://www.dropbox.com/s/802vl4wqj26u7pq/T_Pogos.jpg?raw=1
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard
wrote:
https://annex.omeclk.com/portal/wts/
ugmcnr%7CfvRaqvFDcyTF6wBFvwqfDtrDA6A1kh4a
We had an n/c PCB milling thing. It was a pain to use, so we got rid
of it. It was hard to do two sides, no mask, no plating, no vias. If I
can\'t Dremel and use SMT adapters, I just order a few real 4-layer
boards, plated, ENIG, solder masked, silkscreened, quick-turn, easy.
Our Tormach n/c mill can do PCBs, but again it\'s a nuisance.
https://www.dropbox.com/s/ggh4vldypxgr6lz/Z480_Fixture_1.jpg?raw=1
That got re-done as a proper 4-layer PC board.
https://www.dropbox.com/s/802vl4wqj26u7pq/T_Pogos.jpg?raw=1
--
John Larkin Highland Technology, Inc
Science teaches us to doubt.
Claude Bernard