B
Blip
Guest
On Fri, 04 Apr 2008 04:36:52 GMT, "Brad Velander"
<bveland@SpamThis.com> wrote:
<bveland@SpamThis.com> wrote:
Thanks for the help...
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
B
Brad Velander
Guest
Blip,
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
TYP: "typical" dimension.
The details you seek are all dimensioning standards encompassed in ANSI Y14.5M, search the internet for it and you will find your answers. However I am not sure you will find an online source, a quick search I did only turned up books for sale, no online versions.
The rectangular boxes with symbols and figures is part of the ANSI standard dimensioning where the figures indicate the type of measure/tolerance (center point, perpendicular, surface flatness, parallelism, etc., etc.), the letter usually indicates a datum to which the measure/tolerance pertains and the numerics are typically the actual measure and/or tolerance.
--
Sincerely,
Brad Velander.
"Blip" <blip@krumpli.com> wrote in message news:f7jav3t08ntqh4v84sd7mp0ij5bg1rr51m@4ax.com...
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
TYP: "typical" dimension.
The details you seek are all dimensioning standards encompassed in ANSI Y14.5M, search the internet for it and you will find your answers. However I am not sure you will find an online source, a quick search I did only turned up books for sale, no online versions.
The rectangular boxes with symbols and figures is part of the ANSI standard dimensioning where the figures indicate the type of measure/tolerance (center point, perpendicular, surface flatness, parallelism, etc., etc.), the letter usually indicates a datum to which the measure/tolerance pertains and the numerics are typically the actual measure and/or tolerance.
--
Sincerely,
Brad Velander.
"Blip" <blip@krumpli.com> wrote in message news:f7jav3t08ntqh4v84sd7mp0ij5bg1rr51m@4ax.com...
I see these frequently on PCB figures (REF BSC TYP). Could someone
kindly explain what these mean? REF = reference (to what)? I pretty
sure that BSC is basic spacing between centers? TYP = ?
Also, in datasheet packaging sections, there is often a thin
horizontal rectangle subdivided into (usually) 3 or 4 sections. Each
rectangle usually starts w/ a symbol (for example, 1/2 circle or
theta)in the first section, followed by sections w/ alphas or
numberics - oftentimes accompanied by a letter in a circle. Could
someone explain this or point me to an explanation as well?
Thanks, Tom
B
Blip
Guest
I see these frequently on PCB figures (REF BSC TYP). Could someone
kindly explain what these mean? REF = reference (to what)? I pretty
sure that BSC is basic spacing between centers? TYP = ?
Also, in datasheet packaging sections, there is often a thin
horizontal rectangle subdivided into (usually) 3 or 4 sections. Each
rectangle usually starts w/ a symbol (for example, 1/2 circle or
theta)in the first section, followed by sections w/ alphas or
numberics - oftentimes accompanied by a letter in a circle. Could
someone explain this or point me to an explanation as well?
Thanks, Tom
kindly explain what these mean? REF = reference (to what)? I pretty
sure that BSC is basic spacing between centers? TYP = ?
Also, in datasheet packaging sections, there is often a thin
horizontal rectangle subdivided into (usually) 3 or 4 sections. Each
rectangle usually starts w/ a symbol (for example, 1/2 circle or
theta)in the first section, followed by sections w/ alphas or
numberics - oftentimes accompanied by a letter in a circle. Could
someone explain this or point me to an explanation as well?
Thanks, Tom