diskonchip

M

myliux

Guest
I have brought one 8M M- systems MD2802-D08 ( 32 pins) I wish to apply to
PHILIP 2106 arm system. which data lines I should apply?

would u please show me how to make use of the storage? need schematics and
connection graphic ....etc, advices.
I wish to expand its capacities.

just a newbie. TIA
 
"myliux" <mylinux@earth.com> wrote in message
news:bqo1n8$nje3@imsp212.netvigator.com...
I have brought one 8M M- systems MD2802-D08 ( 32 pins) I wish to apply
to
PHILIP 2106 arm system. which data lines I should apply?

would u please show me how to make use of the storage? need schematics
and
connection graphic ....etc, advices.
I wish to expand its capacities.

just a newbie. TIA

I don't know what expansion bus your ARM system uses, but I'd suggest you
Click to expand...
get a carrier board for the disk-on-chip to suit and use that instead of
trying to reinvent a square wheel.

Ken
 
Ken Taylor <ken123@xtra.co.nz> wrote in message
news:bqo4f7$2468p7$1@ID-76636.news.uni-berlin.de...
"myliux" <mylinux@earth.com> wrote in message
news:bqo1n8$nje3@imsp212.netvigator.com...
I have brought one 8M M- systems MD2802-D08 ( 32 pins) I wish to apply
to
PHILIP 2106 arm system. which data lines I should apply?

would u please show me how to make use of the storage? need schematics
and
connection graphic ....etc, advices.
I wish to expand its capacities.

just a newbie. TIA

I don't know what expansion bus your ARM system uses, but I'd suggest you
get a carrier board for the disk-on-chip to suit and use that instead of
trying to reinvent a square wheel.
Click to expand...

ARM7


Ken
Click to expand...
 
"myliux" <mylinux@earth.com> wrote in message
news:bqo1n8$nje3@imsp212.netvigator.com...

I have brought one 8M M- systems MD2802-D08 ( 32 pins) I wish to apply

to

PHILIP 2106 arm system. which data lines I should apply?

would u please show me how to make use of the storage? need schematics
Click to expand...
The 2106 does not have a data bus. You would need to use the GPIO
pins and make a psudo-bus and bit-bang the control signals.

Do you have a data sheet on the MD2802-D08 ???
 
hamilton <hamilton@deminsional.com> wrote in message
news:3fcfd0ee$1_2@omega.dimensional.com...
"myliux" <mylinux@earth.com> wrote in message
news:bqo1n8$nje3@imsp212.netvigator.com...

I have brought one 8M M- systems MD2802-D08 ( 32 pins) I wish to
apply

to

PHILIP 2106 arm system. which data lines I should apply?

would u please show me how to make use of the storage? need
schematics

The 2106 does not have a data bus. You would need to use the GPIO
pins and make a psudo-bus and bit-bang the control signals.

Do you have a data sheet on the MD2802-D08 ???
Click to expand...
page 8 of
http://www.m-sys.com/m-sysnew/files/documentation/doc/doc_millennium_module_
ds1.1.pdf

please tell me more.
 
"myliux" <mylinux@earth.com> wrote in message
news:bqom5s$nlo69@imsp212.netvigator.com...
hamilton <hamilton@deminsional.com> wrote in message
news:3fcfd0ee$1_2@omega.dimensional.com...
"myliux" <mylinux@earth.com> wrote in message
news:bqo1n8$nje3@imsp212.netvigator.com...

I have brought one 8M M- systems MD2802-D08 ( 32 pins) I wish to
apply

to

PHILIP 2106 arm system. which data lines I should apply?

would u please show me how to make use of the storage? need
schematics

The 2106 does not have a data bus. You would need to use the GPIO
pins and make a psudo-bus and bit-bang the control signals.

Do you have a data sheet on the MD2802-D08 ???

page 8 of

http://www.m-sys.com/m-sysnew/files/documentation/doc/doc_millennium_module_
ds1.1.pdf

please tell me more.

Get the ARM-based evaluation board.
Click to expand...
http://www.m-sys.com/content/Developer/Bus_Boards.asp#INTEGRATOR

Cheers.

Ken
 
PHILIP 2106 arm system. which data lines I should apply?

I don't know what expansion bus your ARM system uses, but I'd suggest you
Click to expand...
No ext buses on the Philips parts. I wonder exactly how Mylinux (with
or without the N) acquired his brain damage. He really ought to be
stuffing crayons up his nose under expert supervision, not posting
reams of tripe* here.


* - I really like this image. I can easily visualize flattened,
dessicated tripe being used as a print medium.
 
Do you have a data sheet on the MD2802-D08 ???

page 8 of


http://www.m-sys.com/m-sysnew/files/documentation/doc/doc_millennium_module_
ds1.1.pdf

please tell me more.

Get the ARM-based evaluation board.
http://www.m-sys.com/content/Developer/Bus_Boards.asp#INTEGRATOR

Cheers.

Ken
Click to expand...

please tell me more again.
 
myliux wrote:
page 8 of
http://www.m-sys.com/m-sysnew/files/documentation/doc/doc_millennium_module_
ds1.1.pdf

please tell me more.
Click to expand...
Oboy,

Well first, are you a software or hardware person ?

The hardware: there are 13 address lines, 8 data lines,
and 3 control lines. You will need 24 lines from the 2106
to connect to the DOC module. 16 output lines, and 8
bi-directional lines.

If you do not understand what this means, please find someone
who does.

The software: On page 10 of said pdf is a memory map of the
above hardware interface. From page 11 to the end of the pdf is
how you would talk to the DOC module.

With the basics out of the way, how do you want to use this ??

If you want to just read/write blocks on the module, there is
enough information here to do just that.

If you want to get a FAT compatable files system running, you
are in for months of work. ( software mostly )

There are folks here who have implemented FAT files systems on
CF cards and other media. They will tell you that this is not
a beginner task.

If you have any resources (i.e. money ) to get this project off
the ground, I would suggect you contact, google is your friend,
a software library vendor who has FAT file systems for sale.
( U.S. Software comes to mind, but I have never used them )

good luck

direct mail is I before E
 
the hardware part is ok to me after reading the schematics.


the software is still very unclear.
 
myliux wrote:
the hardware part is ok to me after reading the schematics.


the software is still very unclear.

Well thats the part that will take months of research and testing.
Click to expand...

google for FAT12/FAT16 and FAT32

Good Luck.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top