DFII - VCAR interface

S

Svenn Are Bjerkem

Guest
Hi,
it seems that with the latest ISR for ICC from December 2007 Cadence
removed the OpenAccess interface in VCAR leaving only the ASCII
interface, which I presume is the one that I can use with the older
5.1.4x versions. There is a Router choise in the Tools menu where I
can export and import data to router and also start the VCAR
application. Unfortunately, the documentation covers USR3 where ICC is
supported through a conversion to OpenAccess, mentioning little on how
to use the ASCII flow. The only info I found on this was in the
release note on the download page and that was quite sparse.

--
Svenn
 

Welcome to EDABoard.com

Sponsor

Back
Top