delicate soldering job

[Miles Golding]

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter, severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G

 

[Lord Garth]

"Miles Golding" <mjgoldingNO@SPAMbtopenworld.com> wrote in message
news:bpq2os$blq$1@sparta.btinternet.com...

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter,
severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G

That is very tight...any chance of sending a photo to
alt.binaries,schematics.electronic?

 

[Miles Golding]

"Lord Garth" <LGarth@Tantalus.net> wrote in message
news:7E3wb.5005$Z11.2616206406@newssvr30.news.prodigy.com...

"Miles Golding" <mjgoldingNO@SPAMbtopenworld.com> wrote in message
news:bpq2os$blq$1@sparta.btinternet.com...
Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an
old
Elonex 325X computer? (Three of the cables, each about 1mm diameter,
severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G


That is very tight...any chance of sending a photo to
alt.binaries,schematics.electronic?

Thanks for the reply LG. I'll do that in the next day or two.

MilesG

 

[R. Steve Walz]

Miles Golding wrote:

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter, severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G
-------------------

That's HUGE, what the hell is wrong? Just resolder it? 1.4 cm is .55
inch! Those six are .1" centers, or classic DIP spacing, EASY!

-Steve
--
-Steve Walz rstevew@armory.com ftp://ftp.armory.com/pub/user/rstevew
Electronics Site!! 1000's of Files and Dirs!! With Schematics Galore!!
http://www.armory.com/~rstevew or http://www.armory.com/~rstevew/Public

 

[Ross Mac]

"Miles Golding" <mjgoldingNO@SPAMbtopenworld.com> wrote in message
news:bpq2os$blq$1@sparta.btinternet.com...

Can anyone please advise how to re-solder the six strands of fine cables
connecting the motherboard to the switch unit on the front panel of an old
Elonex 325X computer? (Three of the cables, each about 1mm diameter,
severed
at the point of connection to the switch panel). The six terminal points
span just 1.4 cm.
Thanks. Miles G


That doesn't sound that tough....If you can't handle it, I bet the guy down

at the local TV repair shop might do it for ya!...
Worth asking anyway