DEL monitor

[Doug King]

Hi I have a Del D1025HE monitor I need to get the case off, I have
removed the 2 screws from the bottom, but am unable to proceed further
as I cannot release what look like clips pound the sides. Thanks for any
help?

Doug
--

Doug

 

[Quadrajet1]

Hi I have a Del D1025HE monitor

Uhhh, that would be Dell. As in Hell.

 

[Chaos Master]

Chaos wrote for Doug King [doug@rovering.demon.co.uk]:

Hi I have a Del D1025HE monitor I need to get the case off, I have
removed the 2 screws from the bottom, but am unable to proceed further
as I cannot release what look like clips pound the sides. Thanks for any
help?

In some monitors you may need to take off hidden screws... don't know about this
one. :/

And BTW it isn't DEL, it is DELL.

[]s
--
_____ _ _
| ____| | \ / | Chaos MasterŽ
| | | \ / | Posting from Brazil.
| |___ | \ / | IRC: Wizard_of_Yendor / PowerNOS
|_____| | \/ | visit www.rootlinux.com.br

 

[John Gill]

Doug:
Some of the Dell monitors have two little slots on the top seam of the
case. Pushing a small narrow screwdriver into the seam releases a plastic
catch that holds the top of the case to the front mask. You may have to
hit the top of the case with your fist while pushing in the screwdriver
to break the catch open.
Other Dell's have the two slots on the side seam, near the top of the
case.
Remove the bottom screws and try to pull the bottom of the cover out
as much a possible, before you try to open the top catches.
Some are quite difficult to break open.
Hope this helps...
John

 

[Sandra]

There is a clip on both sides and two clips on the top. Terrible
things to open. As I remember you have to push them inward (in the
middle of the clip). Some kind of brute force may be required (hit the
case backward).

Sandra



Doug King <doug@rovering.demon.co.uk> wrote in message news:<P5vRuRAfgBhAFwhP@rovering.demon.co.uk>...

Hi I have a Del D1025HE monitor I need to get the case off, I have
removed the 2 screws from the bottom, but am unable to proceed further
as I cannot release what look like clips pound the sides. Thanks for any
help?

Doug