Default keyboard shortcuts not working in Schematic Editor

[spectrallypure]

Hi all,

I just installed IC (5.10.41_USR2.19.52) in Fedora Core 5, and
everything seems to work fine except that -weirdly enough- I can't use
any of the default keyboard shorcuts when using the Schematic Editor
("w" for wire, "f" for fit, and so on). What is even weirdier, the menu
entries for the commands also don't show the shortcuts as letters to
the right of the commands, as would be expected in a normal
installation. I have not defined any bindkeys whatsoever; it's just a
fresh IC installation without any sort of user customization applied
yet.... Could any body please tell me what could be the problem?

Thanks in advance for any help!

Regards,

 

[linkin]

I'm not an expert, but this setup works for me:

1. In the directory you start cadence, make sure your .cdsinit file
has the following:
let( (bindKeyFileList file path saveSkillPath)
bindKeyFileList = '(
"leBindKeys.il"
"schBindKeys.il"
)

2. In the directory you start cadence, you must have bindkey files. I
use leBindKeys.il for layout editor bindkeys, and schBindKeys.il for
schematic editor bindkeys, and they are attached below:

;*******************************************************************
;schBindKeys.il:
;*******************************************************************
;
; This file contains example bind keys for use in:
; Schematic editor (prefix "Schematics")
; Symbol editor (prefix "Symbol")
; Read HDL (prefix "Read HDL") only if capability enabled
;
; The following alias will be used in this file to make the bindkey
; definitions more readable.
;
alias bk hiSetBindKey

(when (getd 'schIsViewCapEnabled) && (schIsViewCapEnabled nil)

; General bindkeys (prefix "Schematics"). These bindkeys are bound
to
; graphics editor ("ge") and human interface ("hi") functionality.
;
bk("Schematics" "<Key>F6" "hiRedraw()")
bk("Schematics" "<Key>Down" "geScroll(nil \"s\" nil)")
bk("Schematics" "<Key>Up" "geScroll(nil \"n\" nil)")
bk("Schematics" "<Key>Right" "geScroll(nil \"e\" nil)")
bk("Schematics" "<Key>Left" "geScroll(nil \"w\" nil)")
bk("Schematics" "<Key>a" "geSingleSelectPoint()")
bk("Schematics" "Ctrl<Key>a" "geSelectAllFig()")
bk("Schematics" "Shift<Key>a" "geSingleSelectBox()")
;bk("Schematics" "<Key>d" "geSubSelectPoint()")
bk("Schematics" "Ctrl<Key>d" "geDeselectAllFig()")
bk("Schematics" "Shift<Key>d" "geSubSelectBox()")
bk("Schematics" "<Key>f"
"schZoomFit(1.0 0.9)")
bk("Schematics" "Ctrl<Key>f" "schSetSelectOptions()")
bk("Schematics" "Shift<Key>f"
"hiZoomAbsoluteScale(getCurrentWindow() 0.9)")
bk("Schematics" "Alt<Key>o" "deOpen()")
bk("Schematics" "<Key>o" "schHiDisplayOptions()")
bk("Schematics" "Shift<Key>o" "schHiEditorOptions()")
bk("Schematics" "Ctrl<Key>o" "schHiGridOptions()")
bk("Schematics" "<Key>q" "schHiObjectProperty()")
bk("Schematics" "<Key>q EF" "schHiObjectProperty()")
bk("Schematics" "Shift<Key>q" "schHiCellViewProperty()")
bk("Schematics" "Shift<Key>q EF" "schHiCellViewProperty()")
bk("Schematics" "<Key>u" "hiUndo()")
bk("Schematics" "Shift<Key>u" "hiRedo()")
bk("Schematics" "<Key>v" "hiVectorPan()")
bk("Schematics" "Ctrl<Key>v" "hiFocusToCIW(hiGetCurrentWindow())")
bk("Schematics" "<Key>z" "hiZoomIn()")
bk("Schematics" "Ctrl<Key>z" "hiZoomOut()")
;bk("Schematics"
"Shift<Key>z" "hiPrevWinView(hiGetCurrentWindow())")
;by HWI
bk("Schematics" "Shift<Key>z"
"hiZoomRelativeScale(getCurrentWindow() 0.707)")
bk("Schematics" "Shift<Key>z EF"
"hiZoomRelativeScale(getCurrentWindow() 0.707)")
bk("Schematics" "<Key>[" "hiZoomRelativeScale(getCurrentWindow()
0.707)")
bk("Schematics" "<Key>]" "hiZoomRelativeScale(getCurrentWindow()
1.414)")
bk("Schematics" "Shift<Key>s" "schHiSaveCellView()")
bk("Schematics" "Ctrl<Key>s" "geSaveAs()")
bk("Schematics" "<Key>1" "geAddNetProbe()")
bk("Schematics" "<Key>2" "geDeleteNetProbe()")
bk("Schematics" "Shift<Key>g" "schHiFindMarker()")
bk("Schematics" "Ctrl<Key>g" "geHiDeleteMarker()")
;bk("Schematics" "<Key>g" "schHiFindMarker()")
bk("Schematics" "<Key>g" "geHiDeleteAllMarker()")

; Specific bindkeys (prefix "Schematics"). These bindkeys are
bound to
; schematic editor ("Schematics") functionality.
;
bk("Schematics" "None<Btn1Down>" "schSingleSelectPt()")
bk("Schematics" "Shift<Btn1Down>" "schAddSelectPt()")
bk("Schematics" "<DrawThru1>" "schDirectEdit(1)")
bk("Schematics" "Shift<DrawThru1>" "schDirectEdit(2)")
bk("Schematics" "Ctrl<DrawThru1>" "schDirectEdit(3)")
bk("Schematics" "None<Btn1Down>(2)" "schExtendSelectPt()")
bk("Schematics" "None<Btn1Down>(2) EF"
"schMouseApplyOrFinish()")
bk("Schematics" "None<Btn2Down>" "schHiMousePopUp()")
bk("Schematics" "None<Btn2Down> EF" "schHiMousePopUp()")
bk("Schematics" "None<Btn3Down> EF" "schCmdOption()")
bk("Schematics" "Shift<Btn3Down> EF"
"schShiftCmdOption()")
bk("Schematics" "<Key>Delete" "schHiDelete()")
; Uncomment following line for HP 700 delete key binding.
; bk("Schematics" "Shift<Key>Escape" "schHiDelete()")
bk("Schematics" "<Key>b" "schHiCreateBlockInst()")
bk("Schematics" "<Key>c" "schHiCopy()")
bk("Schematics" "Shift<Key>c" "geNewWindow()")
bk("Schematics" "<Key>i" "schHiCreateInst()")
bk("Schematics" "<Key>h" "schHiHiliteLabel(\"wire\" \"on\")")
bk("Schematics" "Shift<Key>h" "schHiHiliteLabel(\"wire\" \"off\")")
bk("Schematics" "<Key>8" "schHiHiliteLabel(\"instance\" \"on\")")
bk("Schematics" "Shift<Key>8"
"schHiHiliteLabel(\"instance\" \"off\")")
bk("Schematics" "<Key>l" "schHiCreateWireLabel()")
bk("Schematics" "Shift<Key>n" "schHiCreateNoteLabel()")
bk("Schematics" "Shift<Key>l" "schHiCreateNoteLabel()")
bk("Schematics" "<Key>m" "schHiStretch()")
bk("Schematics" "Shift<Key>m" "schHiMove()")
bk("Schematics" "<Key>p" "schHiCreatePin()")
bk("Schematics" "<Key>5" "schHiRouteFlightLine()")
bk("Schematics" "<Key>r" "schHiRotate()")
bk("Schematics" "Ctrl<Key>r EF" "schSetEnv(\"upsideDown\" t)")
bk("Schematics" "Shift<Key>r EF" "schSetEnv(\"sideways\" t)")
bk("Schematics" "<Key>r EF" "schSetEnv(\"rotate\" t)")
bk("Schematics" "<Key>w" "schHiCreateWire(0.0)")
bk("Schematics" "Shift<Key>w"
"schHiCreateWire(schGetEnv(\"defWideWireWidth\"))")
bk("Schematics" "<Key>x" "schHiCheck(\"run\")")
bk("Schematics" "Shift<Key>x" "schHiCheckAndSave()")
bk("Schematics" "Shift<Key>e" "schHiDescendEdit()")
bk("Schematics" "Shift<Key>r" "schHiDescendRead()")
bk("Schematics" "<Key>e" "schHiEditInPlace()")
bk("Schematics" "Ctrl<Key>e" "schHiReturn()")
bk("Schematics" "Ctrl<Key>w" "schHiReturnToTop()")
bk("Schematics" "<Key>n" "schHiCreateNoteShape()")
bk("Schematics" "<Key>d" "schHiDelete()")

bk("Schematics" "<Key>s EF" "schSnapToConn()") ; note: if you
; change the key binding for schSnapToConn()
; you can also change the Add>>Wire command
; prompts by setting the global skill variable
; schgWirePromptToAppend =
; " or snap to diamond using {your bind key}."
; in your .cdsinit file.

; General bindkeys (prefix "Symbol"). These bindkeys are bound to
; graphics editor ("ge") and human interface ("hi") functionality.
;
bk("Symbol" "<Key>F6" "hiRedraw()")
bk("Symbol" "<Key>Down" "geScroll(nil \"s\" nil)")
bk("Symbol" "<Key>Up" "geScroll(nil \"n\" nil)")
bk("Symbol" "<Key>Right" "geScroll(nil \"e\" nil)")
bk("Symbol" "<Key>Left" "geScroll(nil \"w\" nil)")
bk("Symbol" "<Key>a" "geSingleSelectPoint()")
bk("Symbol" "Ctrl<Key>a" "geSelectAllFig()")
bk("Symbol" "Shift<Key>a" "geSingleSelectBox()")
bk("Symbol" "<Key>d" "schHiDelete()")
bk("Symbol" "Ctrl<Key>d" "geDeselectAllFig()")
bk("Symbol" "Shift<Key>d" "geSubSelectBox()")
bk("Symbol" "<Key>f"
"schZoomFit(1.0 0.9)")
bk("Symbol" "Ctrl<Key>f" "schSetSelectOptions()")
bk("Symbol" "Shift<Key>f"
"hiZoomAbsoluteScale(getCurrentWindow() 0.9)")
bk("Symbol" "<Key>o" "schHiDisplayOptions()")
bk("Symbol" "Shift<Key>o" "schHiEditorOptions()")
bk("Symbol" "Ctrl<Key>o" "schHiGridOptions()")
bk("Symbol" "<Key>q" "schHiObjectProperty()")
bk("Symbol" "<Key>q EF" "schHiObjectProperty()")
bk("Symbol" "Shift<Key>q" "schHiCellViewProperty()")
bk("Symbol" "Shift<Key>q EF" "schHiCellViewProperty()")
bk("Symbol" "<Key>u" "hiUndo()")
bk("Symbol" "Shift<Key>u" "hiRedo()")
bk("Symbol" "<Key>v" "hiVectorPan()")
bk("Symbol" "Ctrl<Key>v" "hiFocusToCIW(hiGetCurrentWindow())")
bk("Symbol" "<Key>z" "hiZoomIn()")
bk("Symbol" "Ctrl<Key>z" "hiZoomOut()")
bk("Symbol" "Shift<Key>z" "hiPrevWinView(hiGetCurrentWindow())")
bk("Symbol" "<Key>["
"hiZoomRelativeScale(getCurrentWindow() 0.5)")
bk("Symbol" "<Key>]"
"hiZoomRelativeScale(getCurrentWindow() 2.0)")
bk("Symbol" "Shift<Key>s" "schHiSaveCellView()")
bk("Symbol" "Ctrl<Key>s" "geSaveAs()")
bk("Symbol" "<Key>9" "geAddNetProbe()")
bk("Symbol" "Shift<Key>g" "schHiFindMarker()")
bk("Symbol" "Ctrl<Key>g" "geHiDeleteMarker()")
bk("Symbol" "<Key>g" "schHiFindMarker()")

; Specific bindkeys (prefix "Symbol"). These bindkeys are bound to
; schematic editor ("Schematics") functionality.
;
bk("Symbol" "<DrawThru1>" "schDirectEdit(1)")
bk("Symbol" "Shift<DrawThru1>" "schDirectEdit(2)")
bk("Symbol" "Ctrl<DrawThru1>" "schDirectEdit(3)")
bk("Symbol" "None<Btn1Down>(2) EF" "schMouseApplyOrFinish()")
bk("Symbol" "None<Btn2Down>" "schHiMousePopUp()")
bk("Symbol" "None<Btn2Down> EF" "schHiMousePopUp()")
bk("Symbol" "None<Btn3Down>EF" "schCmdOption()")
bk("Symbol" "Shift<Btn3Down> EF" "schShiftCmdOption()")
bk("Symbol" "Ctrl<Key>r EF" "schSetEnv(\"upsideDown\" t)")
bk("Symbol" "Shift<Key>r EF" "schSetEnv(\"sideways\" t)")
bk("Symbol" "<Key>r EF" "schSetEnv(\"rotate\" t)")

bk("Symbol" "<Key>r" "schHiRotate(t)")
bk("Symbol" "<Key>Delete" "schHiDelete()")
; Uncomment following line for HP 700 delete key binding.
; bk("Symbol" "Shift<Key>Escape" "schHiDelete()")
bk("Symbol" "<Key>c" "schHiCopy()")
bk("Symbol" "<Key>l" "schHiCreateSymbolLabel()")
bk("Symbol" "Shift<Key>n" "schHiCreateNoteLabel()")
bk("Symbol" "Shift<Key>l" "schHiCreateNoteLabel()")
bk("Symbol" "Shift<Key>m" "schHiMove()")
bk("Symbol" "<Key>m" "schHiSymStretch()")
bk("Symbol" "<Key>n" "schHiCreateNoteShape()")
bk("Symbol" "<Key>p" "schHiCreateSymbolPin()")
bk("Symbol" "Ctrl<Key>e" "schHiReturn()")
bk("Symbol" "<Key>x" "schHiVIC()")

;************************************************************
;Added by HWI
;************************************************************
bk("Schematics" "<Key>3" "geDeleteAllProbe(getCurrentWindow() t)")
bk("Schematics" "Ctrl<Key>n" "simRunNetAndSim()")
bk("Schematics" "<Key>y" "schHiViewToView()")
bk("Schematics" "<Key>F3" "simInitEnv()")
bk("Schematics" "Ctrl<Key>x" "hiCloseWindow(getCurrentWindow())")

bk("Symbol" "Ctrl<Key>x" "hiCloseWindow(getCurrentWindow())")
bk("Symbol" "<Key>0" "schHiSetSymbolOrigin()")
;bk("Symbol" "<Key>w" "schHiCreateSymbolShape("line" "outline")")

;************************************************************
; Command Interpreter (prefix "Command Interpreter")
;************************************************************
bk("Command Interpreter" "<Key>F2" "ddsOpenLibManager()")
bk("Command Interpreter" "<Key>F3" "ddsHiOpenCdsLibEditor()")
bk("Command Interpreter" "Ctrl<Key>x" "ciwHiExit()")
bk("Command Interpreter" "Ctrl<Key>o" "deOpen()")
bk("Command Interpreter" "Ctrl<Key>n" "deNew()")
bk("Command Interpreter" "Ctrl<Key>r" "ddsHiRefresh()")
bk("Command Interpreter"
"Ctrl<Key>s" "pipoDisplay(transStreamOutForm)")
; bk("Command Interpreter"
"Shift<Key>s" "pipoDisplay(transStreamInForm)")
; bk("Command Interpreter" "Shift<Key>c" "ddsHiCloseData()")
;************************************************************
;by HWI
;************************************************************

when( schIsHDLCapEnabled(nil)

; General bindkeys (prefix "Read HDL").
;
bk("Read HDL" "Ctrl<Key>s" "hiSaveAsViewfile()")
bk("Read HDL" "Ctrl<Key>e" "schHDLReturn()")
)

)

unalias bk

;*******************************************************************************
;*******************************************************************************
; leBindKeys.il
;
; This file contains the sample bindKeys that can be used with the
layout
; editor. The procedure 'leInitCommonBindKeys()' sets bindkeys that are
; appropriate for all viewTypes.
;
;*******************************************************************************
; $Author: graham $
; $Revision: 1.22 $
; $Date: 1994/10/07 17:35:26 $
; $State: Exp $
;*******************************************************************************
;*******************************************************************************


;*******************************************************************************
; The following alias is used to make the bindKey definitions more
readable.
;*******************************************************************************

alias bk hiSetBindKey


;***************************************************************************
; Standard Keys

;***************************************************************************

bk("Layout" "<Key>a" "geSingleSelectPoint()")
bk("Layout" "Shift<Key>a" "geSingleSelectBox()")
bk("Layout" "Ctrl<Key>a" "geSelectAllFig()")

bk("Layout" "<Key>b" "geReturnToLevel()")
bk("Layout" "Shift<Key>b" "geReturn()")

bk("Layout" "<Key>c" "leHiCopy()")
bk("Layout" "Shift<Key>c" "leHiChop()")

bk("Layout" "<Key>d" "leHiDelete()")
; bk("Layout" "<Key>d" "geSubSelectPoint()")
bk("Layout" "Shift<Key>d" "geSubSelectBox()")
bk("Layout" "Ctrl<Key>d" "geDeselectAllFig()")

bk("Layout" "<Key>e" "leHiEditDisplayOptions()")
bk("Layout" "Shift<Key>e" "leHiEditEditorOptions()")
bk("Layout" "Ctrl<Key>e" "leHiEditInPlace()")

bk("Layout" "<Key>f" "hiZoomAbsoluteScale(hiGetCurrentWindow()
0.9)")
bk("Layout" "Shift<Key>f" "hiGetCurrentWindow()->stopLevel = 20")
bk("Layout" "Ctrl<Key>f" "hiGetCurrentWindow()->stopLevel = 0")

bk("Layout" "<Key>g" "leToggleGravity()")
bk("Layout" "Ctrl<Key>g" "geZoomToGrid(hiGetCurrentWindow())")

bk("Layout" "<Key>i" "leHiCreateInst()")

bk("Layout" "<Key>k" "leHiCreateRuler()")
bk("Layout" "Shift<Key>k" "leHiClearRuler()")

bk("Layout" "<Key>l" "leHiCreateLabel()")

bk("Layout" "<Key>m" "leHiMove()")
bk("Layout" "Shift<Key>m" "leHiMerge()")

;bk("Layout" "<Key>n" "leSetFormSnapMode(\"L90XFirst\")")
bk("Layout" "Ctrl<Key>n" "leSetFormSnapMode(\"diagonal\")")
bk("Layout" "Shift<Key>n" "leSetFormSnapMode(\"orthogonal\")")

bk("Layout" "<Key>o" "leHiCreateContact()")

bk("Layout" "<Key>p" "leHiCreatePath()")
bk("Layout" "Shift<Key>p" "leHiCreatePolygon()")
bk("Layout" "Ctrl<Key>p" "leHiCreatePin()")

bk("Layout" "<Key>q" "leHiEditProp()")
bk("Layout" "Shift<Key>q" "leEditDesignProperties()")
bk("Layout" "Ctrl<Key>q" "geSaveWinView()")

bk("Layout" "<Key>r" "leHiCreateRect()")
bk("Layout" "Shift<Key>r" "leHiReShape()")
bk("Layout" "Ctrl<Key>r" "hiRedraw()")
bk("Layout" "Shift<Key>o" "leHiRotate()")

bk("Layout" "<Key>s" "leHiStretch()")
bk("Layout" "Shift<Key>s" "leHiSearch()")
bk("Layout" "Ctrl<Key>s" "leHiSplit()")

bk("Layout" "<Key>t" "leHiLayerTap()")
bk("Layout" "Shift<Key>t" "leHiTree()")

bk("Layout" "<Key>u" "hiUndo()")
bk("Layout" "Shift<Key>u" "hiRedo()")

; bk("Layout" "<Key>v" "hiPan()")
bk("Layout" "Shift<Key>v" "leHiAttach()")
bk("Layout" "Ctrl<Key>v" "hiFocusToCIW(hiGetCurrentWindow())")

bk("Layout" "<Key>w" "hiPrevWinView(hiGetCurrentWindow())")
bk("Layout" "Shift<Key>w" "hiNextWinView(hiGetCurrentWindow())")
; bk("Layout" "Ctrl<Key>w" "hiCloseWindow(hiGetCurrentWindow())")
bk("Layout" "Ctrl<Key>w" "geRestoreWinView()")

bk("Layout" "<Key>x" "leHiFlatten()")
bk("Layout" "Shift<Key>x" "leHiDescend()")
;bk("Layout"
"Ctrl<Key>x" "leEIPZoomAbsoluteScale(hiGetCurrentWindow() 0.9)")
bk("Layout" "Ctrl<Key>x" "leCloseWindow()")
bk("Layout" "<Key>f" "hiZoomAbsoluteScale(hiGetCurrentWindow()
0.9)")

bk("Layout" "<Key>y" "leHiYank()")
bk("Layout" "Shift<Key>y" "leHiPaste()")

bk("Layout" "<Key>z" "hiZoomIn()")
bk("Layout" "Shift<Key>z" "hiZoomRelativeScale(hiGetCurrentWindow()
0.5)")
bk("Layout" "Ctrl<Key>z" "hiZoomRelativeScale(hiGetCurrentWindow()
2.0)")


bk("Layout" "<Key>1" "leDisplayOptionsForm->stop->value = 1")
bk("Layout" "<Key>2" "leDisplayOptionsForm->stop->value = 2")
bk("Layout" "<Key>3" "leDisplayOptionsForm->stop->value = 3")
bk("Layout" "<Key>4" "leDisplayOptionsForm->stop->value = 4")
bk("Layout" "<Key>5" "leDisplayOptionsForm->stop->value = 5")

bk("Layout" "<Key>." "leDisplayOptionsForm->segSnapMode->value =
\"orthogonal\"")
bk("Layout" "Shift<Key>." "leDisplayOptionsForm->segSnapMode->value
= \"anyAngle\"")

bk("Layout" "<Key>;" "hiFormDone(leDisplayOptionsForm)")


;***************************************************************************
; Special Keys

;***************************************************************************

bk("Layout" "<Key>Escape EF" "cancelEnterFun()")

bk("Layout" "<Key>Delete" "leHiDelete()" )
bk("Layout" "<Key>BackSpace" "leHiDelete()" )
bk("Layout" "<Key>Tab" "hiPan()")


bk("Layout" "<Key>F1" "hiZoomAbsoluteScale(hiGetCurrentWindow()
0.9)")
bk("Layout" "<Key>F2" "geSave()")
bk("Layout" "<Key>F5" "deOpen()")
bk("Layout" "<Key>F10" "hiHelp('window
deGetAppInfo(deGetEditViewType(hiGetCurrentWindow()))->appName)")




;***************************************************************************
; Numeric Key Pad (Window Panning Functions)

;***************************************************************************

legRpDelta = 0.5

bk("Layout" "<Key>R7" "geScroll(nil \"nw\" nil)")
bk("Layout" "<Key>Up" "geScroll(nil \"n\" nil)")
bk("Layout" "<Key>R9" "geScroll(nil \"ne\" nil)")
bk("Layout" "<Key>Left" "geScroll(nil \"w\" nil)")
bk("Layout" "<Key>R11" "geScroll(nil \"\" nil)")
bk("Layout" "<Key>Right" "geScroll(nil \"e\" nil)")
bk("Layout" "<Key>R13" "geScroll(nil \"sw\" nil)")
bk("Layout" "<Key>Down" "geScroll(nil \"s\" nil)")
bk("Layout" "<Key>R15" "geScroll(nil \"se\" nil)")

bk("Layout" "<Key>KP_Enter" "mouseAddPt()")
bk("Layout" "<Key>KP_Add" "leHiSetRefPoint()")
bk("Layout"
"<Key>KP_Subtract" "leSetRefPointInactive(geGetEditCellView())")

bk("Layout" "<Key>KP_Equal" "legRpDelta = 0.5")
bk("Layout" "<Key>KP_Divide" "legRpDelta = 1.0")
bk("Layout" "<Key>KP_Multiply" "legRpDelta = 2.0")

bk("Layout" "<Key>R4" "legRpDelta = 0.5")
bk("Layout" "<Key>R5" "legRpDelta = 1.0")
bk("Layout" "<Key>R6" "legRpDelta = 2.0")

bk("Layout" "Shift<Key>R7" "leMoveCursor(-legRpDelta
legRpDelta)")
bk("Layout" "Shift<Key>Up" "leMoveCursor( 0
legRpDelta)")
bk("Layout" "Shift<Key>R9" "leMoveCursor( legRpDelta
legRpDelta)")
bk("Layout" "Shift<Key>Left" "leMoveCursor(-legRpDelta
0)")
bk("Layout" "Shift<Key>R11" "leMoveCursorToRefPoint()")
bk("Layout" "Shift<Key>Right" "leMoveCursor( legRpDelta
0)")
bk("Layout" "Shift<Key>R13" "leMoveCursor(-legRpDelta
-legRpDelta)")
bk("Layout" "Shift<Key>Down" "leMoveCursor(0
-legRpDelta)")
bk("Layout" "Shift<Key>R15" "leMoveCursor( legRpDelta
-legRpDelta)")

bk("Layout" "Ctrl<Key>R7" "geScroll(nil \"nw\" t)")
bk("Layout" "Ctrl<Key>Up" "geScroll(nil \"n\" t)")
bk("Layout" "Ctrl<Key>R9" "geScroll(nil \"ne\" t)")
bk("Layout" "Ctrl<Key>Left" "geScroll(nil \"w\" t)")
bk("Layout" "Ctrl<Key>R11" "geScroll(nil \"\" t)")
bk("Layout" "Ctrl<Key>Right" "geScroll(nil \"e\" t)")
bk("Layout" "Ctrl<Key>R13" "geScroll(nil \"sw\" t)")
bk("Layout" "Ctrl<Key>Down" "geScroll(nil \"s\" t)")
bk("Layout" "Ctrl<Key>R15" "geScroll(nil \"se\" t)")


;***************************************************************************
; Created by HWI

;***************************************************************************
bk("Layout" "<Key>n" "leSetFormSnapMode(\"anyAngle\")")
bk("Layout" "Ctrl<Key>m" "leHiMakeCell()")
bk("Layout" "Shift<Key>r EF" "leSetEnv(\"sideways\" t)")
bk("Layout" "Ctrl<Key>r EF" "leSetEnv(\"upsideDown\" t)")
bk("Layout" "<Key>0" "leHiMoveOrigin()")

;bk("Layout" "<Key>j" "mgc_calibre_run_drc t")
;bk("Layout" "Shift<Key>j" "mgc_calibre_run_lvs t")
bk("Layout" "<Key>j" "mgc_calibre_run_drc")
bk("Layout" "Shift<Key>j" "mgc_calibre_run_lvs")
bk("Layout" "Shift<Key>l" "mgc_rve_delete_markers")

;***************************************************************************

unalias bk

 

[Bernd Fischer]

This is not weird this is default behaviour
the bindkeys have to be loaded first.

load( prependInstallPath( "/samples/local/schBindKeys.il" ) )
load( prependInstallPath( "/samples/local/leBindKeys.il" ) )

put these two lines of code in your .cdsinit file.

Bernd