Data sheet or specs for an MOV. V7390

[Mal in Aus]

Hi all,

I need to replace a fried MOVs on a board. The manufacture mark is an M with
a circle around it, the part no. is V7390.

It is a black, through hole device. 7.6mm diamerter

Does anyone happen to know where to find a spec sheet or the manufacturers
web site?
The all knowing Google hasn't turned up any useful results thus far.

Thanks in advance,
Mal.

 

[Franc Zabkar]

On Fri, 3 Sep 2010 18:22:15 +1000, "Mal in Aus" <nobody@nowhere> put
finger to keyboard and composed:

I need to replace a fried MOVs on a board. The manufacture mark is an M with
a circle around it, the part no. is V7390.

It is a black, through hole device. 7.6mm diamerter

Could it be a Panasonic / Matsushita part?
http://industrial.panasonic.com/www-data/pdf/AWA0000/AWA0000CE2.pdf

The "7" could correspond to a standard 7mm disc diameter, and "390"
could be the rated voltage, either 390V or 39V (= 39 x 10^0).

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

 

[Mal in Aus]

Thanks for the tip Franc.

Given where it is in the circuit (input protection in automotive circuit)
that voltage would make sense.

Cheers,
Mal.

"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
newsig186d27oq45rkivib1ac99nhsa1t798t@4ax.com...

On Fri, 3 Sep 2010 18:22:15 +1000, "Mal in Aus" <nobody@nowhere> put
finger to keyboard and composed:


I need to replace a fried MOVs on a board. The manufacture mark is an M
with
a circle around it, the part no. is V7390.

It is a black, through hole device. 7.6mm diamerter

Could it be a Panasonic / Matsushita part?
http://industrial.panasonic.com/www-data/pdf/AWA0000/AWA0000CE2.pdf

The "7" could correspond to a standard 7mm disc diameter, and "390"
could be the rated voltage, either 390V or 39V (= 39 x 10^0).

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.