Guest
Hi,
I have a slightly sick Cushman CE50-TG-1 and was wondering if anyone
has taken any voltage readings from a working unit they would be
willing to share.
I need to check the voltages at test points 3 & 4 on the 29000 board
with the frequency set between 9.9999mhz and 100khz. That should give
me the normal range for both the A & B VCO's control voltage's.
(referenced to chassis ground) Any other voltages would be helpful so I
can note them for future reference.
Sure would have been nice if Cushman would have provided some basic
voltage readings on the schematics.
Any help would be appreciated,
Thanks,
RoD
Please email to....
sad.tip@verizon.net
I have a slightly sick Cushman CE50-TG-1 and was wondering if anyone
has taken any voltage readings from a working unit they would be
willing to share.
I need to check the voltages at test points 3 & 4 on the 29000 board
with the frequency set between 9.9999mhz and 100khz. That should give
me the normal range for both the A & B VCO's control voltage's.
(referenced to chassis ground) Any other voltages would be helpful so I
can note them for future reference.
Sure would have been nice if Cushman would have provided some basic
voltage readings on the schematics.
Any help would be appreciated,
Thanks,
RoD
Please email to....
sad.tip@verizon.net