Crate BV150H

N

N_Cook

Guest
What sort of quiescent mains draw current (240V land) for 6x good 6L6 and
remainder of the amp , if the bias has not been messed around with ?
 
Meat Plow <mhywatt@yahoo.com> wrote in message
news:pan.2011.03.15.15.53.57@lmao.lol.lol...
On Tue, 15 Mar 2011 14:56:45 +0000, N_Cook wrote:

What sort of quiescent mains draw current (240V land) for 6x good 6L6
and remainder of the amp , if the bias has not been messed around with ?

Fuse is 3A SB for 230V. I'd expect less than 1 amp idle. Didn't you ask
about this amp back in 2009?



--
Live Fast Die Young, Leave A Pretty Corpse
Click to expand...
That was "lighthouse" neon 47K dropper for 110V used in uk on 240V. Same
with this one needing the mains switch changing , charred and part melted sw
cover this one but holding up at 47K.
This one been run too long with insufficient bias and run away red valves.
 
On Tue, 15 Mar 2011 14:56:45 +0000, N_Cook wrote:

What sort of quiescent mains draw current (240V land) for 6x good 6L6
and remainder of the amp , if the bias has not been messed around with ?
Click to expand...
Fuse is 3A SB for 230V. I'd expect less than 1 amp idle. Didn't you ask
about this amp back in 2009?



--
Live Fast Die Young, Leave A Pretty Corpse
 
On Mar 15, 10:56 am, "N_Cook" <dive...@tcp.co.uk> wrote:
What sort of quiescent mains draw current (240V land) for 6x good 6L6 and
remainder of the amp , if the bias has not been messed around with ?
Click to expand...
Check plate current directly. Its not a great idea to ballpark bias by
mains current...
 
"bored junkie"


Check plate current directly. Its not a great idea to ballpark bias by
mains current...


** Wrong - as always.



..... Phil
 
"bored junkies are all losers "

Check plate current directly. Its not a great idea to ballpark bias by
mains current...


** Wrong - as always.




..... Phil
 
On Mar 15, 11:31 pm, "Phil Allison" <phi...@tpg.com.au> wrote:
"bored junkie"

Check plate current directly. Its not a great idea to ballpark bias by
mains current...

** Wrong  -  as always.

....  Phil
Click to expand...
Horseshit. You lose....again.....
 
On Mar 16, 12:17 am, "Phil Allison" <phi...@tpg.com.au> wrote:
"bored junkies are all losers "

Check plate current directly. Its not a great idea to ballpark bias by
mains current...

** Wrong  -  as always.

....  Phil
Click to expand...
Waaaaaaaa! Boo hoo......

Here's Phallison going for the record of biggest douche on Usenet and
he can't even get that right.....
 
"bored junkies are all losers "

Check plate current directly. Its not a great idea to ballpark bias by
mains current...


** Wrong advice - as always.




..... Phil
 
On Mar 16, 9:09 pm, "Phil Allison" <phi...@tpg.com.au> wrote:
"bored junkies are all losers "

Check plate current directly. Its not a great idea to ballpark bias by
mains current...

** Wrong  advice  -  as always.

....  Phil
Click to expand...
Still not there yet......keep trying....
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top