Cortex-M1 in Actel in strait VHDL?

[self]

Hello All,

I have a requirement to build a SOC design with two Arm cores along
with some standard and custom peripherals. The Actel Cortex-M1
enabled FPGA's appear to be ideal for my application because the
licensing fee is included in the price of the processor.

I have started playing around with the Libero tools to see how
processor development is done with them. The Libero environment comes
with a tool called SmartDesign for assembling a processor system. It
seems to work reasonably well for creating an initial system. You
connect the pieces with a graphical editor and the tool outputs VHDL
(or Verilog) for synthesis and simulation.

Though fine for initial prototyping I do not like to use graphical
tools to maintain a delivered design. It is just too likely that some
glitch will block me from doing what I want. I prefer to enter and
maintain the design at the HDL level with just a text editor and
synthesis tool.

I looked at the VHDL that comes out of SmartDesign and it is typical
machine generated code. Just a bunch of block instantiations
connected by meaningless signal names. Here comes my question.

Using Actel tools can you work with the Arm/Amba processor IP directly
in HDL? Is there a library of cores with documentation? Any comments
are greatly appreciated.

Best wishes,

Pete

 

[Antti]

On Jul 17, 8:17 pm, self <pete.dud...@comcast.net> wrote:

Hello All,

I have a requirement to build a SOC design with two Arm cores along
with some standard and custom peripherals.  The Actel Cortex-M1
enabled FPGA's appear to be ideal for my application because the
licensing fee is included in the price of the processor.

I have started playing around with the Libero tools to see how
processor development is done with them.  The Libero environment comes
with a tool called SmartDesign for assembling a processor system.  It
seems to work reasonably well for creating an initial system.  You
connect the pieces with a graphical editor and the tool outputs VHDL
(or Verilog) for synthesis and simulation.

Though fine for initial prototyping I do not like to use graphical
tools to maintain a delivered design.  It is just too likely that some
glitch will block me from doing what I want.  I prefer to enter and
maintain the design at the HDL level with just a text editor and
synthesis tool.

I looked at the VHDL that comes out of SmartDesign and it is typical
machine generated code.  Just a bunch of block instantiations
connected by meaningless signal names.  Here comes my question.

Using Actel tools can you work with the Arm/Amba processor IP directly
in HDL?  Is there a library of cores with documentation?  Any comments
are greatly appreciated.

Best wishes,

  Pete

NO NO NO
the Actel cortex is preoptimized hard-macro block that can not be used
with other tools or modified directly.

you can of course use original arm cortex code if you have it (and
license)

Antti

 

[self]

I've been looking at this some more. I don't see any technical hurdles
to maintaining my Actel Cortex-M1 design in strait VHDL.

The code that comes out of SmartDesign is standard structural VHDL
that I can edit and modify with just a text editor. The only
inconvenience is the text formatting. I think I will use a VHDL
beautifier like the one that exists in emacs to clean up all the
source. Then I will further clean up the resulting code as needed
where I will be working. As I see it, there is no need to clean up
parts of the source code that I am not modifying.

Really the machine generated code that comes out of SmartDesign is
pretty good. There are bad indentation and line breaks that can be
cleaned up with a beautifier. Beyond that the only ugly thing is the
port map assignments for busses. The port maps break out every single
member of a bus and assign them individually. That really boosts the
size of source code and hurts readability.

I understand that the Cortex processor IP is a black box. I cannot get
access to the Cortex processor internal source code and retarget it
(without paying a lot of money). I just want to maintain the system
VHDL using only a text editor. That looks to be entirely practical.