copy - skip libraries

[sridhartv25@gmail.com]

Hello all,


When ever I try copying a cell heirarchicly from the Library
Manager , its becoming a problem to delete the unwanted libraries from
the option Skip libraries , there are almost 20 to 35 libraries which
has to be deleted so that no references will be taken from those
libraries , how can I set in such a way that only the standard
libraries should be shown always , (by default it shows all the
libraries).

Cheers,
Sridhar.

 

[Andrew Beckett]

sridhartv25@gmail.com wrote, on 03/20/09 09:04:

Hello all,


When ever I try copying a cell heirarchicly from the Library
Manager , its becoming a problem to delete the unwanted libraries from
the option Skip libraries , there are almost 20 to 35 libraries which
has to be deleted so that no references will be taken from those
libraries , how can I set in such a way that only the standard
libraries should be shown always , (by default it shows all the
libraries).

Cheers,
Sridhar.

Put something like this in your .cdsenv file (note, it needs to be .cdsenv
rather than .cdsinit SKILL equivalent so that the library manager picks it up):

cdsLibManager.copy skipLibsText string "analogLib basic"


Obviously put in the library names you need.

I didn't think it put all the libraries in by default - perhaps I'm mistaken, or
perhaps somebody has already set this up.

Regards,

Andrew.

 

[sridhartv25@gmail.com]

Once again thanks Andrew .