M
Matthew E Rosenthal
Guest
I have a design that runs perfecly fine in ise 6.1 but when i try to
implement the design in 6.2 i get a bunch of errors somehow related to pin
drive strength and slew rate?
i have a diff clock pair that uses io standard lvpecl_25
and a couple signals on different banks that use typical io standards.
the errors start in the map sections
here is a printout of the log
(I changed sensitive variable names to NETNAME, note they were not all the
same variable)
Using target part "2vp7ff672-7".
Removing unused or disabled logic...
Running cover...
Running directed packing...
Running delay-based LUT packing...
Running related packing...
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp RTS, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp RTS, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of
LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of
LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp ser_out, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
esignRules:350 - Blockcheck: Invalid drive strength. Drive strength
must
not be set in IOB comp NETNAME, based on its IO standard of
LVCMOS25.
ERROR
esignRules:352 - Blockcheck: Invalid slew rate. Slew rate must not
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR:Map:46 - Errors in physical DRC.
implement the design in 6.2 i get a bunch of errors somehow related to pin
drive strength and slew rate?
i have a diff clock pair that uses io standard lvpecl_25
and a couple signals on different banks that use typical io standards.
the errors start in the map sections
here is a printout of the log
(I changed sensitive variable names to NETNAME, note they were not all the
same variable)
Using target part "2vp7ff672-7".
Removing unused or disabled logic...
Running cover...
Running directed packing...
Running delay-based LUT packing...
Running related packing...
ERROR
must
not be set in IOB comp RTS, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp RTS, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of
LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of
LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp ser_out, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR
must
not be set in IOB comp NETNAME, based on its IO standard of
LVCMOS25.
ERROR
be set
in IOB comp NETNAME, based on its IO standard of LVCMOS25.
ERROR:Map:46 - Errors in physical DRC.