Guest
When i turn my convection oven on it will only stay on for about a
minute and then turn off.Would appreciate some input on this .
minute and then turn off.Would appreciate some input on this .
S
Sam Goldwasser
Guest
jajer2@webtv.net writes:
There are any number of things that can cause
a piece of equipment to come on for only a few seconds. Someone will
have to check it out.
My guess with almost zero information would be that the fan isn't running
or is running slowly and it's overheating and shutting down.
Can you hear the fan running?
You might get some more useful information by providing a make and model.
What it does when it quits (error message, etc.)
Whether this is a problem that just happened suddenly or there were
some indications of it previously.
--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html
Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.
It's broken, sorry.
There are any number of things that can causea piece of equipment to come on for only a few seconds. Someone will
have to check it out.
My guess with almost zero information would be that the fan isn't running
or is running slowly and it's overheating and shutting down.
Can you hear the fan running?
You might get some more useful information by providing a make and model.
What it does when it quits (error message, etc.)
Whether this is a problem that just happened suddenly or there were
some indications of it previously.
--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html
Important: The email address in this message header may no longer work. To
contact me, please use the Feedback Form at repairfaq.org. Thanks.