Connector ID?

[Phil Hobbs]

Hi, all,

I have this very nice Mitutoyo FS-110 metallurgical microscope with a
slightly mismatched lamp housing (wrong connector). It works okay with
a separate DC power supply, but I'd much rather use the variable
transformer built into the microscope base.

Mitutoyo uses connectors like these, which I have never seen anywhere
else. They're sort of like a cross between DIN and Cannon connectors:

<https://i.ebayimg.com/images/g/jpsAAOSwqpBdHMGa/s-l1600.jpg>

Anybody know what kind this is?

Thanks

Phil Hobbs

--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC / Hobbs ElectroOptics
Optics, Electro-optics, Photonics, Analog Electronics
Briarcliff Manor NY 10510

http://electrooptical.net
http://hobbs-eo.com

 

[George Herold]

On Wednesday, August 28, 2019 at 1:12:10 PM UTC-4, Phil Hobbs wrote:

Hi, all,

I have this very nice Mitutoyo FS-110 metallurgical microscope with a
slightly mismatched lamp housing (wrong connector). It works okay with
a separate DC power supply, but I'd much rather use the variable
transformer built into the microscope base.

Mitutoyo uses connectors like these, which I have never seen anywhere
else. They're sort of like a cross between DIN and Cannon connectors:

https://i.ebayimg.com/images/g/jpsAAOSwqpBdHMGa/s-l1600.jpg

Anybody know what kind this is?

Looks like a Hirose. Hang on I'll find a part number....
like this,
https://www.digikey.com/products/en?keywords=HR1731-ND

If it's Hirose it will have a little HRS emblem. (all sorta mushed together)

George H.

Thanks

Phil Hobbs

--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC / Hobbs ElectroOptics
Optics, Electro-optics, Photonics, Analog Electronics
Briarcliff Manor NY 10510

http://electrooptical.net
http://hobbs-eo.com

 

[Phil Hobbs]

On 8/28/19 1:35 PM, George Herold wrote:

On Wednesday, August 28, 2019 at 1:12:10 PM UTC-4, Phil Hobbs wrote:
Hi, all,

I have this very nice Mitutoyo FS-110 metallurgical microscope with a
slightly mismatched lamp housing (wrong connector). It works okay with
a separate DC power supply, but I'd much rather use the variable
transformer built into the microscope base.

Mitutoyo uses connectors like these, which I have never seen anywhere
else. They're sort of like a cross between DIN and Cannon connectors:

https://i.ebayimg.com/images/g/jpsAAOSwqpBdHMGa/s-l1600.jpg

Anybody know what kind this is?
Looks like a Hirose. Hang on I'll find a part number....
like this,
https://www.digikey.com/products/en?keywords=HR1731-ND

If it's Hirose it will have a little HRS emblem. (all sorta mushed together)

Thanks, George!

Cheers

Phil Hobbs


--
Dr Philip C D Hobbs
Principal Consultant
ElectroOptical Innovations LLC / Hobbs ElectroOptics
Optics, Electro-optics, Photonics, Analog Electronics
Briarcliff Manor NY 10510

http://electrooptical.net
http://hobbs-eo.com