Connecting the degauss positor incorrectly.

A

AliTonto

Guest
I have reconnected the positor the wrong way around and then swithed
the TV on.
Nothing happened and it didn't turn on anyway. (I had just replaced 2
caps in another section on the PCB).
Now I am wondering if my error would cause much damage or what;
I am really not in the mood to go back to it unless I have something
to feel better about.
Any thoughts?
Thanks guys.
 
"AliTonto" <alitonto@hotmail.com> wrote in message
news:6655e407.0406291938.1dc3e535@posting.google.com...
I have reconnected the positor the wrong way around and then swithed
the TV on.
Nothing happened and it didn't turn on anyway. (I had just replaced 2
caps in another section on the PCB).
Now I am wondering if my error would cause much damage or what;
I am really not in the mood to go back to it unless I have something
to feel better about.
Any thoughts?
Thanks guys.
Click to expand...
For me the degauss would be essential, if you are happy without it shouldn't
be to too much I feel.



--
Regards ........... Rheilly Phoull
 
Your set has a much bigger problem than the degaussing circuit. The power
supply, and or the scan circuits have to be properly serviced.

--

Jerry G. GLG Technologies GLG
==========================


"AliTonto" <alitonto@hotmail.com> wrote in message
news:6655e407.0406291938.1dc3e535@posting.google.com...
I have reconnected the positor the wrong way around and then swithed
the TV on.
Nothing happened and it didn't turn on anyway. (I had just replaced 2
caps in another section on the PCB).
Now I am wondering if my error would cause much damage or what;
I am really not in the mood to go back to it unless I have something
to feel better about.
Any thoughts?
Thanks guys.
 
Hi,
How did you manage?

3-pinned device wil not fit wrong way around. 2 pin devices do not have
"polarity". It is does not matter how you fit it.

Something else is gone in your TV.

Rudolf

"AliTonto" <alitonto@hotmail.com> wrote in message
news:6655e407.0406291938.1dc3e535@posting.google.com...
I have reconnected the positor the wrong way around and then swithed
the TV on.
Nothing happened and it didn't turn on anyway. (I had just replaced 2
caps in another section on the PCB).
Now I am wondering if my error would cause much damage or what;
I am really not in the mood to go back to it unless I have something
to feel better about.
Any thoughts?
Thanks guys.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top