connect camcorder to video card

[Larry Simpson]

Can I attach a Sanyo camcorder directly to ATI All in Wonder card? My
camcorders a/v to coax RF-adaptor was working well but I broke it and I
can't find a replacemet. The camcorder (VM-D6) output is a female 8 pin and
may be propriety for Sanyo. I would like the corresponding male connector
to connect to the inputs on the ATI card or the purple cable (rca sound and
video). Is there such a connector?

I tried using the a wire with an 8 pin male connector cable that comes with
the ATI card to accomplish the above. It fit into the camcorder. I
connected the video portion to the purple cable but got no signal. Are the
formats incompatible?

Thanks, Larry

 

[Larry Simpson]

Thanks. I am in the midst of following up on both those leads. Larry

"Jerry G." <jerryg@total.net> wrote in message
news:bigtba$g54$1@news.eusc.inter.net...

You need the proper adaptor. Did you bring your adaptor to a TV service
shop to at least see if it is serviceable? Also, did you try Sanyo
directly to find out their parts rep for your area? They may be able to
supply a new one for you.

The two formats are not compatible, and this would be too complex for
you to build a proper working one.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
==============================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
Instruments http://www.zoom-one.com/glgtech.htm
==============================================
"Larry Simpson" <lsimpson@trafficnet.com> wrote in message
news:LxS2b.53060$_V.14560@news04.bloor.is.net.cable.rogers.com...
Can I attach a Sanyo camcorder directly to ATI All in Wonder card? My
camcorders a/v to coax RF-adaptor was working well but I broke it and I
can't find a replacemet. The camcorder (VM-D6) output is a female 8 pin
and
may be propriety for Sanyo. I would like the corresponding male
connector
to connect to the inputs on the ATI card or the purple cable (rca sound
and
video). Is there such a connector?

I tried using the a wire with an 8 pin male connector cable that comes
with
the ATI card to accomplish the above. It fit into the camcorder. I
connected the video portion to the purple cable but got no signal. Are
the
formats incompatible?

Thanks, Larry