B
bhb
Guest
Hi,
I use 2 Altera FPGA : 1 Cyclone C12 (first in chain TDI/TDO) and 1 Cyclone
C4 (second in chain TDI/TDO). So, in multi-device configuration the first
device's nCE (C12) need to be tied low while its nCE0 pin is connected to
nCE of the next device (C4) in the chain.
In my scheme, there is an inversion !. There is the nCE pin of C4 tied low,
while the nCE0 of C4 is connected to the nCE of the C12. So, I just can
program the C4 FPGA, but I can't program the C12.
Is someone could help me ?. Thanks.
Bernard.
I use 2 Altera FPGA : 1 Cyclone C12 (first in chain TDI/TDO) and 1 Cyclone
C4 (second in chain TDI/TDO). So, in multi-device configuration the first
device's nCE (C12) need to be tied low while its nCE0 pin is connected to
nCE of the next device (C4) in the chain.
In my scheme, there is an inversion !. There is the nCE pin of C4 tied low,
while the nCE0 of C4 is connected to the nCE of the C12. So, I just can
program the C4 FPGA, but I can't program the C12.
Is someone could help me ?. Thanks.
Bernard.