C
Cher
Guest
I have an ACER peripheral monitor - Dell Badged.
It has a burnt resistor inside the Flyback cage. Current resistance is
4 ohms but I can't read what it should be. it is 1/4 wat and feeds a
1n4004 which feeds another one and some 150k resistors far from the
HV.
The auto brightness limiter doesn't function - can't change anything
with the ABL pot.
The set runs at max brightness. Could this be the reason? the diode
may also be bad. resistans seems too high, but i haven't removed it
yet.
ant ideas??
cher
It has a burnt resistor inside the Flyback cage. Current resistance is
4 ohms but I can't read what it should be. it is 1/4 wat and feeds a
1n4004 which feeds another one and some 150k resistors far from the
HV.
The auto brightness limiter doesn't function - can't change anything
with the ABL pot.
The set runs at max brightness. Could this be the reason? the diode
may also be bad. resistans seems too high, but i haven't removed it
yet.
ant ideas??
cher