N
Noozer
Guest
I need to make a few jumper cables for my PC (front audio, LED, etc.) but I
don't know the specs for the headers other than they are male at 0.1 inch
spacing.
For the female ends of my cables what do I need
- for a housing? (most will be two pin, but there will be some 3 or more pin
and dual row headers)
- female pins inside the housing?
- tool to crimp the femail pins to my wire before inserting into the housing
I'm hoping to place an order at Digikey soon. The headers appear to look
like:
http://dkc3.digikey.com/PDF/C043/0089-0091.pdf
Any help is appreciated.
don't know the specs for the headers other than they are male at 0.1 inch
spacing.
For the female ends of my cables what do I need
- for a housing? (most will be two pin, but there will be some 3 or more pin
and dual row headers)
- female pins inside the housing?
- tool to crimp the femail pins to my wire before inserting into the housing
I'm hoping to place an order at Digikey soon. The headers appear to look
like:
http://dkc3.digikey.com/PDF/C043/0089-0091.pdf
Any help is appreciated.