Compound for anode cups

[Z]

What is the compound for CRT anode cups?
--
Z
Remove all Zeds in e-mail address to reply.

 

[James Sweet]

"Z" <post@imaris.demon.co.uk> wrote in message
news:AQsc72x4dbnAFwSW@imaris.demon.co.uk...

What is the compound for CRT anode cups?
--

I use dielectric grease, available at any automotive parts store..

 

[Art]

Some manufacturers use the dielectric grease as James stated, other
manufactures use RTV sealant, while still others use absolutely nothing,
hoping their rubber boot will suffice to keep dirt and humidity away form
the physical connection.
"James Sweet" <jamessweet@hotmail.com> wrote in message
news:qRknc.55311$Ik.4185609@attbi_s53...

"Z" <post@imaris.demon.co.uk> wrote in message
news:AQsc72x4dbnAFwSW@imaris.demon.co.uk...
What is the compound for CRT anode cups?
--

I use dielectric grease, available at any automotive parts store..

 

[Jfet]

Most TVs I've worked on have nothing.


"Art" <stubby@comcast.net> wrote in message news:kd6dnYxceLT3pwPdRVn-hA@comcast.com...

Some manufacturers use the dielectric grease as James stated, other
manufactures use RTV sealant, while still others use absolutely nothing,
hoping their rubber boot will suffice to keep dirt and humidity away form
the physical connection.
"James Sweet" <jamessweet@hotmail.com> wrote in message
news:qRknc.55311$Ik.4185609@attbi_s53...

"Z" <post@imaris.demon.co.uk> wrote in message
news:AQsc72x4dbnAFwSW@imaris.demon.co.uk...
What is the compound for CRT anode cups?
--

I use dielectric grease, available at any automotive parts store..

 

[Jason D.]

On Sun, 9 May 2004 14:55:10 -0400, "Jfet"
<clubkidd_toronto@hotmail.com> wrote:

Most TVs I've worked on have nothing.


Still it is good practice to put some dielectric grease there.

Increases reliablity & less arcing. In fact I use this also on HV
blocks to make sliding leads in easier and decrease corrsion.

Cheers,

Wizard