J
johnlewis
Guest
hi i work for an in car specialist in there service department.
we have two clasonic dvd players in that both have lodading problems.
they use the ba6209n loading driver ic these have burnt out and taken
the 4.7 ohm resistor with them that on the feed to the chip. we
replaced the chip and resistor and all seemed fine.
till three months later when we got one then the other back with the
same fault.
there is no heat sinks on the chips. i belive the chips are widly used
in vcr so any info will help on this chip. if anyones had simmelir
problems were the chip keeps burning out.
thanks in advance.
we have two clasonic dvd players in that both have lodading problems.
they use the ba6209n loading driver ic these have burnt out and taken
the 4.7 ohm resistor with them that on the feed to the chip. we
replaced the chip and resistor and all seemed fine.
till three months later when we got one then the other back with the
same fault.
there is no heat sinks on the chips. i belive the chips are widly used
in vcr so any info will help on this chip. if anyones had simmelir
problems were the chip keeps burning out.
thanks in advance.