CircuitMart Sales Promotion

C

CircuitMart

Guest
Hello Friends,


This is Iris From guangdong China...

I just wonder whether there are ladies and gentlemen
who need print circuit boards making...

I am doing this for past 5 years...


For Price and Quality, I don't wanna blabla.

But do have a try with us, visit website for more
details. You will not be disappointed.

Contact me and tell me you see message from

this post, 10% percent discount available.

That means, roughly USD40 You could
have your 2 layer PCB of 5 pcs orso done in 3-5 days.

We could also do boards with blind-buried via up
to 48 layers to meet HDC requirements.

-------------------------------------
www.circuit-mart.com
Reliable China PCB Vendor for 5 Years



##-----------------------------------------------#
Delivered via http://www.electrondepot.com
Electronics Enthusiasts' Community of the Ne
Web and RSS access to your favorite newsgroup -
sci.electronics.basics - 99678 messages and counting
##-----------------------------------------------##
 
CircuitMart had written this in response to
http://www.electrondepot.com/electronics/CircuitMart-Sales-Promotion-110349-.htm
:

CircuitMart wrote:

Who is brave enough to have a try with fab houses in Shenzhen China?

No need for prepayment, you will have new outsourcing possibilities.



Iris

-------------------------------------
www.circuit-mart.com
Reliable China PCB Vendor for 5 Years



##-----------------------------------------------#
Delivered via http://www.electrondepot.com
Electronics Enthusiasts' Community of the Ne
Web and RSS access to your favorite newsgroup -
sci.electronics.basics - 99516 messages and counting
##-----------------------------------------------##
 
On Fri, 08 Apr 2011 07:16:54 +0000, sales_at_circuit-mart_dot_com@foo.com
(CircuitMart) wrote:

CircuitMart had written this in response to
http://www.electrondepot.com/electronics/CircuitMart-Sales-Promotion-110349-.htm
:

CircuitMart wrote:

Who is brave enough to have a try with fab houses in Shenzhen China?
Click to expand...
We use several board fabs in China. Most are reasonably good. None have been
as bad as the one from India. They had different laws of physics.

No need for prepayment, you will have new outsourcing possibilities.
Click to expand...
Huh?
 
CircuitMart had written this in response to
http://www.electrondepot.com/electronics/Re-CircuitMart-Sales-Promotion-110366-.htm
:

I have been in PCB related field for nine years, I was young when I joined
a subsidiary of then Legend and now LENOVO, and I still remember Name
change matter of LENOVO, we removed the former LEGEND, and put up a new
one: That is LENOVO. It occurred in roughly 2003 or so. It is in that year
we are unfortunately caught by SARS, and we were ordered to stay in plant
area for a whole month to avoid contagion.
At that time, when we make boards, the normal standard were QS9000,
ISO14000, and the fabrication process normally followed IPC-6012, the
acceptance standard follows IPC-6012-F to most overseas clients. For
customer from Europe, we use PERFEG-3C as normal standard, nowadays
IPC-A-600 F has been revised to IPC-A-600G… How time flies! I still
remember we also use Japanese standard for FUJITSU, MATSUSHITA, TOSHIBA,
and US MIL standards for boards with strict requirements. You see, we have
so many Japanese clients and I even acted as translator of Japanese for
technical matters. I met lots of overseas clients, but none of them,
regarding the attitude and principle of working, could be better than that
of Japanese clients.
But now they encountered natural disaster-the earthquake…. And eventually
they threw away nuclear polluted water into the Giant Big Sea. How much
tons of the water？ Is it really that much as reported by Japanese
government? They did it first and then informed international world later.
When such a government did such a Sxxx job, Which government of the world
could be trusted? Nearly 10 years past since my fist PCB related position,
Is the world becoming better? Or worse? Could every one of us work
together to make it better? Have I made boards for weapons or similar
purpose ? I always think about this point. If we could not avoid such
purpose Board, make it ROHS, make it more economical….

Browse us for details....

Iris


-------------------------------------
www.circuit-mart.com
Reliable China PCB Vendor for 5 Years



##-----------------------------------------------#
Delivered via http://www.electrondepot.com
Electronics Enthusiasts' Community of the Ne
Web and RSS access to your favorite newsgroup -
sci.electronics.basics - 99522 messages and counting
##-----------------------------------------------##
 
CircuitMart wrote:


I'm a spam whore!


--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top