S
Symon
Guest
Hi All,
When I probe nets with Chipscope Inserter, the net names change. For
example, 'clock_enable' changes to 'ila0_trig0<68>'. This screws up my
timing constraints declared in my .UCF file. E.g. NET "clock_enable" TNM=FFS
"ff_grp1"; doesn't see the net anymore.
Anyone solved this?
Cheers, Syms.
p.s. I'm using version 6.2.02 of the Chipscope software. I'm downloading
6.2.03 to see if it makes any difference.
When I probe nets with Chipscope Inserter, the net names change. For
example, 'clock_enable' changes to 'ila0_trig0<68>'. This screws up my
timing constraints declared in my .UCF file. E.g. NET "clock_enable" TNM=FFS
"ff_grp1"; doesn't see the net anymore.
Anyone solved this?
Cheers, Syms.
p.s. I'm using version 6.2.02 of the Chipscope software. I'm downloading
6.2.03 to see if it makes any difference.