Cheap EPROM programmer for 29F020 chips ?

1

127.0.0.1

Guest
X-No-Archive: yes

Im looking for a cheap programmer to program the 29F020 flash eproms - in
the UK.

Does anyone know of any ?
 
"127.0.0.1" <127.0.0.1@hushmail.com> wrote in message
news:bqj171$22hv40$1@ID-9141.news.uni-berlin.de...
Im looking for a cheap programmer to program the 29F020 flash eproms - in
the UK.

Does anyone know of any ?


http://www.artbv.nl/products/programmers/index.htm
Click to expand...

I've had the EPP-2 (serial i/f), since 1998 and it served me well (was given
it for nothing). It was available then from Maplin but I have no idea of
their current UK peddlers.
 
On Tue, 2 Dec 2003 21:46:06 -0000, "127.0.0.1"
<127.0.0.1@hushmail.com> wrote:

X-No-Archive: yes

Im looking for a cheap programmer to program the 29F020 flash eproms - in
the UK.

Does anyone know of any ?
Click to expand...
Build or buy?

Will you consider a costlier, harder to find, but pin compatible that
can be programmed with a simple circuit?

Do you already have a device with a 29F040 chip with on-board
upgrade/programming facilites?
 
X-No-Archive: yes

Buy, im too lazy ;)

I dont have any device.. I tried to program one of the chips in an older
motherboard
but it seems not all the address lines are connected as it only programmed
128KB.

I thought I might as well buy a programmer for a few bob but cant seem to
find any
less than Ł500.


Im looking for a cheap programmer to program the 29F020 flash eproms -
in
the UK.

Does anyone know of any ?


Build or buy?

Will you consider a costlier, harder to find, but pin compatible that
can be programmed with a simple circuit?

Do you already have a device with a 29F040 chip with on-board
upgrade/programming facilites?
Click to expand...
 
Eprom Programmer 4 -
http://www.progshop.com/shop/programmer/index.shtml

or you can build it your self from schematics

http://www.batronix.com/electronic/circuits/eeprommer.shtml





On Thu, 4 Dec 2003 15:16:45 -0000, "127.0.0.1"
<127.0.0.1@hushmail.com> wrote:

X-No-Archive: yes

Buy, im too lazy ;)

I dont have any device.. I tried to program one of the chips in an older
motherboard
but it seems not all the address lines are connected as it only programmed
128KB.

I thought I might as well buy a programmer for a few bob but cant seem to
find any
less than Ł500.


Im looking for a cheap programmer to program the 29F020 flash eproms -
in
the UK.

Does anyone know of any ?


Build or buy?

Will you consider a costlier, harder to find, but pin compatible that
can be programmed with a simple circuit?

Do you already have a device with a 29F040 chip with on-board
upgrade/programming facilites?
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top