caps for mobo

[Tom Del Rosso]

Of all the types of electrolytics at Digikey or Mouser, which do you favor
for replacement of bulging mobo caps?


--

Reply in group, but if emailing add one more
zero, and remove the last word.

 

[amdx]

On 11/4/2011 12:44 PM, Tom Del Rosso wrote:

Of all the types of electrolytics at Digikey or Mouser, which do you favor
for replacement of bulging mobo caps?

I used Rubycon,

Here's where I got mine, He has other brands too.

http://badcaps.net/

I didn't get the kit, just replace the bulging caps.
The computer worked a couple years, then the HD died.

Just fired up a new computer build yesterday.
Mikek

 

[spamtrap1888]

On Nov 4, 10:44 am, "Tom Del Rosso" <td...@verizon.net.invalid> wrote:

Of all the types of electrolytics at Digikey or Mouser, which do you favor
for replacement of bulging mobo caps?

This website is a gold mine of such information:

http://badcaps.net/forum/index.php

 

[Michael A. Terrell]

Tom Del Rosso wrote:

Of all the types of electrolytics at Digikey or Mouser, which do you favor
for replacement of bulging mobo caps?

Digikey, Panasonic FM series is what I use.


--
You can't have a sense of humor, if you have no sense.

 

On Nov 4, 2:05 pm, "Michael A. Terrell" <mike.terr...@earthlink.net>
wrote:

Tom Del Rosso wrote:

Of all the types of electrolytics at Digikey or Mouser, which do
you favor
for replacement of bulging mobo caps?

   Digikey, Panasonic FM series is what I use.

--
You can't have a sense of humor, if you have no sense.

FMs are good but sometimes not a size match. The Nichicon HM, HN ans
HZ series are even lower ESR than the FMs and are available in those
tall/skinny packages. Mouser carries a lot.

You want the lowest ESR and highest ripple current to reduce internal
heating of the cap to get longest life. My Gigabyte boards use organic
polymer caps that are sometimes an order of magnitude lower ESR.
Pricey but about as good as they get.

G˛

 

[Stephen]

"Tom Del Rosso" <td_03@verizon.net.invalid> wrote in message
news:j9196s$p7n$1@dont-email.me...

Of all the types of electrolytics at Digikey or Mouser, which do you favor
for replacement of bulging mobo caps?

Panasonic FM or FC series......

 

[Michael A. Terrell]

stratus46@yahoo.com wrote:

On Nov 4, 2:05 pm, "Michael A. Terrell" <mike.terr...@earthlink.net
wrote:
Tom Del Rosso wrote:

Of all the types of electrolytics at Digikey or Mouser, which do
you favor
for replacement of bulging mobo caps?

Digikey, Panasonic FM series is what I use.

--
You can't have a sense of humor, if you have no sense.

FMs are good but sometimes not a size match. The Nichicon HM, HN ans
HZ series are even lower ESR than the FMs and are available in those
tall/skinny packages. Mouser carries a lot.

I haven't run into a board where the FM didn't fit.

You want the lowest ESR and highest ripple current to reduce internal
heating of the cap to get longest life. My Gigabyte boards use organic
polymer caps that are sometimes an order of magnitude lower ESR.
Pricey but about as good as they get.

What I'm repairing isn't worth the extra expense. I no longer repair
$80,000 Telemetry receivers.


--
You can't have a sense of humor, if you have no sense.

 

[Tom Del Rosso]

Michael A. Terrell wrote:

Tom Del Rosso wrote:

Of all the types of electrolytics at Digikey or Mouser, which do
you favor for replacement of bulging mobo caps?


Digikey, Panasonic FM series is what I use.

Thanks. There is no parts kit at badcaps.net for this model, so I would go
with that because Panasonic has a wide selection. Only question is, ESR is
not even spec'd. The Nichicon is a couple of ohms. Any idea what the FM
spec is?


--

Reply in group, but if emailing add one more
zero, and remove the last word.

 

[Michael A. Terrell]

Tom Del Rosso wrote:

Michael A. Terrell wrote:
Tom Del Rosso wrote:

Of all the types of electrolytics at Digikey or Mouser, which do
you favor for replacement of bulging mobo caps?


Digikey, Panasonic FM series is what I use.

Thanks. There is no parts kit at badcaps.net for this model, so I would go
with that because Panasonic has a wide selection. Only question is, ESR is
not even spec'd. The Nichicon is a couple of ohms. Any idea what the FM
spec is?

The 'Panasonic Industrial' website has the datasheets for all their
componets. The FM series datasheet lists the ESR for every part in that
line.

<http://industrial.panasonic.com/www-data/pdf/ABA0000/ABA0000CE108.pdf>


--
You can't have a sense of humor, if you have no sense.

 

[larry moe 'n curly]

Tom Del Rosso wrote:

ESR is not even spec'd. The Nichicon is a couple of ohms.
Any idea what the FM spec is?

I think a couple of ohms would be roughly 100x higher than normal,
unless the cap is small, like 10uF. For 1,000uF @ 10V, ESR is
probably around 0.02 ohm.

BadCaps.net has this thread about recommended cap brands and models:

http://www.badcaps.net/forum/showthread.php?t=2280

Another thread linked to a big database of caps (278MB download):

https://rapidshare.com/#!download|850l33|4015592669|Datasheets.rar|278316|R~28C904B8B6B913951D42F625FB45AB2C|0|0

I'm no expert, but I think for most caps on motherboards and video
cards, Panasonic FJ would be preferred to FM, but it seems FJ isn't
normally sold in the US, except from the only Ebay seller that doesn't
seem to sell counterfeit caps:

http://stores.ebay.com/PC-MotherBoard-Capacitors-Store

However they sell both good and bad brands. Prices aren't the lowest,
but shipping is cheap, so for small orders they can be the best
choice. Digi-Key shipping is also cheap for 8 oz. or less, about
$2.50.

In addition to Mouser, BadCaps.net, and Digi-Key, there's BDent.com,
which has mostly Sanyo (now labelled Suncon) but some Nichicon.

A friend of mine buys mostly Nichicon HN series, and apparently the
only better wet electrolytics for switching power supplies are
Nichicon HZ, which BadCaps may now be offering for the same price as
HN. I've been using mostly Sanyo WG, which are supposed to be between
Nichicon HN and HM in characteristics. The experts at BadCaps.net
generally recommend Japanese brands but warn against using United
Chemicon/Nippon Chemicon models KZG and KZJ (they say KZE is good),
and they don't like Toshin Kogyo (marked "TK"). I believe the only
non-Japanese or non-American caps they like are Samxon and Jamicon,
and Samxon is sometimes the only quality maker of certain narrow
diameter caps.

 

[Tom Del Rosso]

larry moe 'n curly wrote:

Tom Del Rosso wrote:

ESR is not even spec'd. The Nichicon is a couple of ohms.
Any idea what the FM spec is?

I think a couple of ohms would be roughly 100x higher than normal,
unless the cap is small, like 10uF. For 1,000uF @ 10V, ESR is
probably around 0.02 ohm.

That sounds right, but oddly the mouser catalog has 1 to 3.5 ohms listed.

Thanks for all the info.


--

Reply in group, but if emailing add one more
zero, and remove the last word.