Canon DM-MV20E mini-dv camera problem - service manual?

D

David

Guest
Hi all,
I'm wondering if anyone can point me into the right direction in obtaining a
service manual for the following Canon mini-dv camcorder:
Canon DM-MV20E
It appears that the zoom control on the camera has failed. When the button
is switched to either T or W the camera doesn't zoom. The camera will zoom
if the remote is used instead, which makes the zoom switch on the camera the
likely culprit. I need to know the procedure for removing the switch.

Thanks,

David.
 
Hi,

I have a manual for DMMV30, but it is over 30M.

You can try to get one for your camera at High Country Service Data.

Rudolf

"David" <privateguy@telstra.com> wrote in message
news:cenltg$fca$1@perki.connect.com.au...
Hi all,
I'm wondering if anyone can point me into the right direction in obtaining
a
service manual for the following Canon mini-dv camcorder:
Canon DM-MV20E
It appears that the zoom control on the camera has failed. When the
button
is switched to either T or W the camera doesn't zoom. The camera will
zoom
if the remote is used instead, which makes the zoom switch on the camera
the
likely culprit. I need to know the procedure for removing the switch.

Thanks,

David.
Click to expand...
 
or better still, contact Canon.

"Rudolf Ladyzhenskii" <rudolfl@optusnet.com.au> wrote in message
news:410f9f1e$0$10612$afc38c87@news.optusnet.com.au...
Hi,

I have a manual for DMMV30, but it is over 30M.

You can try to get one for your camera at High Country Service Data.

Rudolf

"David" <privateguy@telstra.com> wrote in message
news:cenltg$fca$1@perki.connect.com.au...
Hi all,
I'm wondering if anyone can point me into the right direction in
obtaining
a
service manual for the following Canon mini-dv camcorder:
Canon DM-MV20E
It appears that the zoom control on the camera has failed. When the
button
is switched to either T or W the camera doesn't zoom. The camera will
zoom
if the remote is used instead, which makes the zoom switch on the camera
the
likely culprit. I need to know the procedure for removing the switch.

Thanks,

David.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top