G
Guenther Sohler
Guest
Sometimes it happens that you have to revert to the very old tools.
Now I need to get Dracula LPE working.
I have got a Dracula LPE Runset, which I fill in, use PDRACULA, jxrun.com
After all that I expect to get a parasitic netlist with dracula, but I
dont get any
Relevent statements in the runset file are
*DESCRIPTION
INDISK = in.gds
PRIMARY = in
SCHEMATIC = LVSLOGIC.DAT
PRINTFILE = h4ls
OUTDISK = outdisk
*END
*DESCRIPTION
SYSTEM = GDS2
FLAG-NON45 = Yes
FLAG-OFFGRID = Yes
FLAG-SELFINTERS = Yes
FLAG-PTH-OFFGRID = No
PATH-W-OFFGRID = Yes
PATH-W-ROUND = Up
CHECK-PATH = Yes
MAG-BEF-GRID = Yes
MINI-SUMMARY = No
CNAMES-CSEN = Yes
KEEPDATA = Yes
*END
*OPERATION
LPECHK[SRCPU]
LPESELECT[SK] MOS CORNER=0.5 &
LPESELECT[SK] LDD &
LPESELECT BJT &
LPESELECT[SW] RES &
LPESELECT DIO &
LPESELECT[CS] CAP OUTPUT NETLIS
*END
But I dont get any file 'NETLIS' and I tried many different names.
PDRACULA returns without errors
When I run 'TYPE SPICE ALL' in LPEPRO, I get
*******************************************************************************
*/N* LPEPRO (REV. 4.81.06-2002 / SUN-4 S5R4 /GENDATE: 4-JUN/2002 )
*** ( Copyright 1995, Cadence ) ***
*/N* EXEC TIME =11:13:24 DATE =21-NOV-2008 HOSTNAME = blade100
*******************************************************************************
DRACULA LPE POST PROCESSOR ( LPEPRO ) PROGRAM BEGINS .....
*** ERROR : SIZE OF ARRAY MUNT IS TOO SMALL : 50
ENTER COMMAND
:TYPE SPICE ALL
*TYPE SPICE ALL
** WARNING: FILE 7MOSPNET IS EMPTY; MOS W/L INFORMATION MIGHT BE MISSING
OPEN EXISTING FILE ... 6NETL STATUS = OK
M4 5 1 3 0 XN_S10 W=5.00U L=0.50U
M3 3 8 2 0 XN_S10 W=5.00U L=0.50U
M8 7 2 4 4 XP_S10 W=3.00U L=1.00U
M2 7 2 3 0 XN_S10 W=1.50U L=1.00U
M5 6 8 1 6 XP_S10 W=1.50U L=0.55U
M6 4 5 2 4 XP_S10 W=1.00U L=0.55U
M7 5 2 4 4 XP_S10 W=1.00U L=0.55U
M1 3 8 1 0 XN_S10 W=0.50U L=0.50U
*
* CAPACITOR SPECIFICATION
*** FILE 7CAPXMER IS EMPTY.
CAPACITANCE INFORMATION IS NOT AVAILABLE.
*
* DIODE SPECIFICATION
*** FILE 7DIOXMER IS EMPTY.
DIODE INFORMATION IS NOT AVAILABLE.
ENTER COMMAND
Does anybody have a clue ?
Now I need to get Dracula LPE working.
I have got a Dracula LPE Runset, which I fill in, use PDRACULA, jxrun.com
After all that I expect to get a parasitic netlist with dracula, but I
dont get any
Relevent statements in the runset file are
*DESCRIPTION
INDISK = in.gds
PRIMARY = in
SCHEMATIC = LVSLOGIC.DAT
PRINTFILE = h4ls
OUTDISK = outdisk
*END
*DESCRIPTION
SYSTEM = GDS2
FLAG-NON45 = Yes
FLAG-OFFGRID = Yes
FLAG-SELFINTERS = Yes
FLAG-PTH-OFFGRID = No
PATH-W-OFFGRID = Yes
PATH-W-ROUND = Up
CHECK-PATH = Yes
MAG-BEF-GRID = Yes
MINI-SUMMARY = No
CNAMES-CSEN = Yes
KEEPDATA = Yes
*END
*OPERATION
LPECHK[SRCPU]
LPESELECT[SK] MOS CORNER=0.5 &
LPESELECT[SK] LDD &
LPESELECT
LPESELECT[SW] RES &
LPESELECT
LPESELECT[CS] CAP OUTPUT NETLIS
*END
But I dont get any file 'NETLIS' and I tried many different names.
PDRACULA returns without errors
When I run 'TYPE SPICE ALL' in LPEPRO, I get
*******************************************************************************
*/N* LPEPRO (REV. 4.81.06-2002 / SUN-4 S5R4 /GENDATE: 4-JUN/2002 )
*** ( Copyright 1995, Cadence ) ***
*/N* EXEC TIME =11:13:24 DATE =21-NOV-2008 HOSTNAME = blade100
*******************************************************************************
DRACULA LPE POST PROCESSOR ( LPEPRO ) PROGRAM BEGINS .....
*** ERROR : SIZE OF ARRAY MUNT IS TOO SMALL : 50
ENTER COMMAND
:TYPE SPICE ALL
*TYPE SPICE ALL
** WARNING: FILE 7MOSPNET IS EMPTY; MOS W/L INFORMATION MIGHT BE MISSING
OPEN EXISTING FILE ... 6NETL STATUS = OK
M4 5 1 3 0 XN_S10 W=5.00U L=0.50U
M3 3 8 2 0 XN_S10 W=5.00U L=0.50U
M8 7 2 4 4 XP_S10 W=3.00U L=1.00U
M2 7 2 3 0 XN_S10 W=1.50U L=1.00U
M5 6 8 1 6 XP_S10 W=1.50U L=0.55U
M6 4 5 2 4 XP_S10 W=1.00U L=0.55U
M7 5 2 4 4 XP_S10 W=1.00U L=0.55U
M1 3 8 1 0 XN_S10 W=0.50U L=0.50U
*
* CAPACITOR SPECIFICATION
*** FILE 7CAPXMER IS EMPTY.
CAPACITANCE INFORMATION IS NOT AVAILABLE.
*
* DIODE SPECIFICATION
*** FILE 7DIOXMER IS EMPTY.
DIODE INFORMATION IS NOT AVAILABLE.
ENTER COMMAND
Does anybody have a clue ?