Canadian PCB Suppliers, approx. 50 boards

[Kim]

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

 

[John Smith]

"Kim" <ksleep@sympatico.ca> wrote in message
news:awCid.22623$dj2.1471531@news20.bellglobal.com...

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or
silk
screening required.
Thanks,
Kim

Try smth@dowco.com to see if they fit your needs. They are on the Left Coast
of Canada. Their Web page (if you can call it that) is http://www.1pcb.com/

If your traces are small (10 mils) they will use their Shanghai facility but
they might still get your boards to you in a week. Boards with larger traces
are made in Canada, I think.

My only connection with them is as a client.

John

 

[John Larkin]

On Thu, 4 Nov 2004 22:26:57 -0500, "Kim" <ksleep@sympatico.ca> wrote:

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

AP Circuits, Alberta I think. They just did a nice proto for us, about
as you describe, in 2 days. I don't think they've ever made a bad
board for us.

John

 

[Greg Neff]

On Thu, 4 Nov 2004 22:26:57 -0500, "Kim" <ksleep@sympatico.ca> wrote:

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

http://www.crestcircuit.com/crestmain.html

================================

Greg Neff
VP Engineering
*Microsym* Computers Inc.
greg@guesswhichwordgoeshere.com

 

[Rob Paisley]

"Kim" <ksleep@sympatico.ca> wrote in message news:<awCid.22623$dj2.1471531@news20.bellglobal.com>...

Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

---------------------

Two services that I have used with good results.

http://www.lktronics.com/

http://www.circuit-spec.com/

Rob.

------------------

 

[Gary Lecomte]

I am not a commerical manufacturer, But I could possibly do those
boards for you. However I would need to see some artwork first.

E-mails to me MUST CONTAIN the word "Electronic" in the Subject Line.

I could also do a Free Sample for you.

Take care......Gary
****************************************************************************

rpaisley4@cogeco.ca (Rob Paisley) wrote in message news:<bb39a577.0411080347.74d0ed59@posting.google.com>...

"Kim" <ksleep@sympatico.ca> wrote in message news:<awCid.22623$dj2.1471531@news20.bellglobal.com>...
Are there any suppliers of short-run (approx. 50 boards) PCBs?. The board
that I require will be approx 3x3in, with holes drilled, NO masking or silk
screening required.
Thanks,
Kim

---------------------

Two services that I have used with good results.

http://www.lktronics.com/

http://www.circuit-spec.com/

Rob.

------------------