Can you recommend a PCB supplier?

[Marc Hillman]

Can anybody recommend some makers of PCB's for the hobbyist? I am looking
for makers of mainly single sided, but some double sided boards, for home
hobby projects. Only need quantity 1 or 2. Low cost is most important
driver. Am aware of futrelec, but are there others?

 

[Adrian Jansen]

On 28/8/2011 9:03 PM, Marc Hillman wrote:

Can anybody recommend some makers of PCB's for the hobbyist? I am
looking for makers of mainly single sided, but some double sided boards,
for home hobby projects. Only need quantity 1 or 2. Low cost is most
important driver. Am aware of futrelec, but are there others?

I have used BatchPCB a couple of times for small runs/prototyping. Good
delivery, very cheap, no significant setup charges. Just upload your
Gerbers to their website, and you get an instant check and price. There
are some limitations, like no re-entrant holes or funny cutouts, but
otherwise single and double sided incl plate-thru is fine.

http://batchpcb.com/index.php/Products

--
Regards,

Adrian Jansen adrianjansen at internode dot on dot net
Note reply address is invalid, convert address above to machine form.

 

[Dennis]

On 29/08/2011 6:18 AM, Adrian Jansen wrote:

On 28/8/2011 9:03 PM, Marc Hillman wrote:
Can anybody recommend some makers of PCB's for the hobbyist? I am
looking for makers of mainly single sided, but some double sided boards,
for home hobby projects. Only need quantity 1 or 2. Low cost is most
important driver. Am aware of futrelec, but are there others?

I have used BatchPCB a couple of times for small runs/prototyping. Good
delivery, very cheap, no significant setup charges. Just upload your
Gerbers to their website, and you get an instant check and price. There
are some limitations, like no re-entrant holes or funny cutouts, but
otherwise single and double sided incl plate-thru is fine.

http://batchpcb.com/index.php/Products

Also pcbcart.com which I and others have used and have been happy with.

 

[Marc Hillman]

Thanks Adrian and Dennis. I will give them a try when my board is ready.

 

[Clifford Heath]

On 08/28/11 21:03, Marc Hillman wrote:

Can anybody recommend some makers of PCB's for the hobbyist? I am
looking for makers of mainly single sided, but some double sided boards,
for home hobby projects. Only need quantity 1 or 2. Low cost is most
important driver. Am aware of futrelec, but are there others?

I've been happy with <http://www.olimex.com> - they have a very cheap
prototyping service, and will panelise and depanelise (straight-snap)
including silkscreen, etc.

Clifford Heath.

 

[Jasen Betts]

On 2011-08-28, Adrian Jansen <adrian@qq.vv.net> wrote:

On 28/8/2011 9:03 PM, Marc Hillman wrote:
Can anybody recommend some makers of PCB's for the hobbyist? I am
looking for makers of mainly single sided, but some double sided boards,
for home hobby projects. Only need quantity 1 or 2. Low cost is most
important driver. Am aware of futrelec, but are there others?

www.pcbzone.net seems slightly cheaper than pcbcart for one-offs
faster too.

--
⚂⚃ 100% natural

--- Posted via news://freenews.netfront.net/ - Complaints to news@netfront.net ---

 

[Ramkumar Ramaswamy]

On Aug 30, 5:17 pm, Jasen Betts <ja...@xnet.co.nz> wrote:

On 2011-08-28, Adrian Jansen <adr...@qq.vv.net> wrote:

On 28/8/2011 9:03 PM, Marc Hillman wrote:
....some double sided boards, for home hobby projects. Only need

quantity 1 or 2. Low cost is most
important driver.

--- Posted via news://freenews.netfront.net/ - Complaints to n...@netfront.net ---

Having beaten my head against the wall with the same question for many
years, I threw in the towel and started my own PCB batching service.
2-sided boards, both sides soldermask, both sides silkscreen, 100%
flyprobe-tested, and immersion-gold finished, at $1.50 per square inch
with no setup fee, no minimum. Yes, you can order just one board!

More detail on my website at www.audesine.com.

Cheers-Ram

 

[Eric]

在 2011年8月28日星期日 UTC+8下午7:03:25，Marc Hillman写道：

Can anybody recommend some makers of PCB's for the hobbyist? I am looking
for makers of mainly single sided, but some double sided boards, for home
hobby projects. Only need quantity 1 or 2. Low cost is most important
driver. Am aware of futrelec, but are there others?
We have ordered in www.pcbgogo.com several times, the quality is good, and price is lowest!