Can you adivce USB to UART signal chip ?

B

Boki

Guest
Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.
 
Boki <bokiteam@ms21.hinet.net> wrote in news:1181580147.092009.52740
@x35g2000prf.googlegroups.com:

Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.
You need a USB host controller system with an OS that can enumerate USB,
and you can get source or drivers for the platform.

There is no such thing to "convert" a USB device to something else in a
simple way.

If it were me, I'd find a phone that has standard RS232 signalling.
 
On Mon, 11 Jun 2007 09:42:27 -0700, Boki <bokiteam@ms21.hinet.net> put
finger to keyboard and composed:

Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.
http://www.elexol.com/USB_Modules/

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:qpfr631s1urg64unnun9qvom52jib5vr6e@4ax.com...
On Mon, 11 Jun 2007 09:42:27 -0700, Boki <bokiteam@ms21.hinet.net> put
finger to keyboard and composed:

Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.

http://www.elexol.com/USB_Modules/
No. These are _slave_ devices. They won't do what is needed here (he needs
a USB host chip).

Best Wishes
 
Boki wrote:

Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.
I doubt that this wil do the job for you regards a phone, but have a
look through the dats sheets and specs, it may help.
http://www.dontronics-shop.com/product.php?productid=16654
also:
http://www.dontronics-shop.com/product.php?productid=16620

Don...


--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
No More Damn Spam: http://www.wizard-of-oz.com

USB Flash Drive interface for existing products.
http://www.dontronics-shop.com/product.php?productid=16654
 
"Don McKenzie" <look@mysig.com> wrote in message
news:4676c491$0$24918$afc38c87@news.optusnet.com.au...
Boki wrote:

Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.

I doubt that this wil do the job for you regards a phone, but have a
look through the dats sheets and specs, it may help.
http://www.dontronics-shop.com/product.php?productid=16654
also:
http://www.dontronics-shop.com/product.php?productid=16620

Don...
These are complete 'built' assemblies, based on the Vinculum chip, which
will do what he wants (the phone is only seen by the PC as a 'comm'
device). However the chip alone, is about 1/3rd the price, and he has
already asked for something cheaper!...

Best Wishes
 
Roger Hamlett wrote:

"Don McKenzie" <look@mysig.com> wrote in message
news:4676c491$0$24918$afc38c87@news.optusnet.com.au...

Boki wrote:


Hi All,

I am connecting to Nokia phone, due to its output is only USB signal,
even it can emulate com port at PC side, however, it need USB host
( and driver )

I am implementing on embedded system, I believe you know what I need.

Could you please adivce the sutible chip for me ?

I want as cheap as possible.


Best regards,
Boki.

I doubt that this wil do the job for you regards a phone, but have a
look through the dats sheets and specs, it may help.
http://www.dontronics-shop.com/product.php?productid=16654
also:
http://www.dontronics-shop.com/product.php?productid=16620

Don...

These are complete 'built' assemblies, based on the Vinculum chip, which
will do what he wants (the phone is only seen by the PC as a 'comm'
device).
Hi Roger,
second one I listed is the chip itself, and the first one, the module, I
gave as an example for him, to enable him to understand what is required.

However the chip alone, is about 1/3rd the price, and he has
already asked for something cheaper!...
yes I know, and I listed the IC, but won't if cost him more than the
price of a chip, and devise a means of somehow hooking up to an IC and
I/O connectors, and get it running?

reality is, for a one off, you would be lucky to do it cheaper, let
alone the time involved it getting it all running.

But if he can, fine! :)

I gave him all the options to look at in the Vinculum family, and make a
judgement based on having the info at his fingertips.

Cheers Don...


--
Don McKenzie

Site Map: http://www.dontronics.com/sitemap
E-Mail Contact Page: http://www.dontronics.com/email
No More Damn Spam: http://www.wizard-of-oz.com

USB Flash Drive interface for existing products.
http://www.dontronics-shop.com/product.php?productid=16654
 

Welcome to EDABoard.com

Sponsor

Back
Top