Can evaporative air cooler be the alternative to the air con

[RickiRick]

My air conditioner has broken again. Honestly, I fed up with it. I clea
it regularly, but nevertheless, it has broken again at the third time..
Can this small evaporative air cooler be the alternative to the ai
conditioner? Or is it too small and better to buy the new ai
conditioner?

'[image
https://cdn.bestadviser.in/reviews/65/cb/65cb5e7a666df0913a4fadd89b78bf26.jpg]
(https://www.bestadviser.in/evaporative-air-cooler


--
RickiRick

 

[pfjw@aol.com]

On Tuesday, November 21, 2017 at 10:37:54 AM UTC-5, RickiRick wrote:

Can this small evaporative air cooler be the alternative to the air
conditioner? Or is it too small and better to buy the new air
conditioner?

Evaporative coolers, AKA Swamp Coolers, are best in very dry climates. As you are aware, they operate by taking advantage of the phase-change of water going from a liquid to a gas - which has the unfortunate result of greatly increasing the local humidity. Further to this, as the local humidity increases, the working efficiency of a swamp-cooler decreases.

So, depending on where you are and what you need to cool, that little device can be very effective (desert-dry conditions and using it as a cooling fan), or it can be a major source of mold and mildew (anywhere in temperate or tropical conditions, or used indoors. Its sole advantage is that it is far cheaper to operate and is far simpler than a conventional AC unit.

So, it depends. Here in south-central PA, a swamp-cooler would grow mold before my eyes. And we put tablets in our AC drain pans to prevent Legionnaires' disease.

Peter Wieck
Melrose Park, PA

 

What kind of failures ? Heat pumps get bad reversing valves, compressors get bad valves period. If it is not installed properly that happens alot more.. At best, before the system is filled, flushed and sealed it should be on a vacuum pump overnight.

If your problems are electrical that is much easier to deal with. Also, don't brush and disturb those evaporator and condenser coils. If they clog up you either need filters or something to keep the gunk out, but if you have to clean them use compressed air.

 

[RickiRick]

jurb6006@gmail.com;4011728 Wrote:

What kind of failures ? Heat pumps get bad reversing valves, compressor
get bad valves period. If it is not installed properly that happens alo
more.. At best, before the system is filled, flushed and sealed i
should be on a vacuum pump overnight.

If your problems are electrical that is much easier to deal with. Also
don't brush and disturb those evaporator and condenser coils. If the
clog up you either need filters or something to keep the gunk out, bu
if you have to clean them use compressed air.

The problem is with clogged ac condensate drain. I know, it happens. Bu
by me ir happens incredibly ofte


--
RickiRick

 

On Wednesday, 22 November 2017 08:17:49 UTC, RickiRick wrote:

jurb6006@gmail.com;4011728 Wrote:

What kind of failures ? Heat pumps get bad reversing valves, compressors
get bad valves period. If it is not installed properly that happens alot
more.. At best, before the system is filled, flushed and sealed it
should be on a vacuum pump overnight.

If your problems are electrical that is much easier to deal with. Also,
don't brush and disturb those evaporator and condenser coils. If they
clog up you either need filters or something to keep the gunk out, but
if you have to clean them use compressed air.

The problem is with clogged ac condensate drain. I know, it happens. But
by me ir happens incredibly often

I've had that with fridges, and solved it by putting copper wire down the drain tube & leaving it in place. It inhibits mould, and is easily wiggled to clear any blockage.


NT

 

[pfjw@aol.com]

On Wednesday, November 22, 2017 at 3:17:49 AM UTC-5, RickiRick wrote:

The problem is with clogged ac condensate drain. I know, it happens. But
by me ir happens incredibly often

There are tablets for that. Clearly your maintenance program is sadly lacking.

http://www.supplyhouse.com/Nu-Calgon-4296-60-Condensate-Pan-Treatment-Tablets?gclid=Cj0KCQiA3dTQBRDnARIsAGKSfllwFy3QGaGwVMjzKzEYKbd07G8cDLUyJ_l25_IOO2Cxs1jpil1jC_4aAu3YEALw_wcB

We use these or-equal in our window units, and I have our service people use them in the much larger units for our practices. Never had a condensate drain clog in the last 20+ years where these were in use - and regular service was/is done.

Peter Wieck
Melrose Park, PA

 

>"The problem is with clogged ac condensate drain."

Sounds like a not so good install. Could also be an air leak betwen the filter and the intake.

And, these things are not easy to really clean, the one here I would have to take the whole plenum apart. It did leak a couple years ago but seems to be alright now.

Of course make sure you have a good pitch on that drainpipe as well.

 

tabb...@gmail.com wrote:

On Wednesday, 22 November 2017 08:17:49 UTC, RickiRick wrote:
jurb...@gmail.com;4011728 Wrote:

What kind of failures ? Heat pumps get bad reversing valves, compressors
get bad valves period. If it is not installed properly that happens alot
more.. At best, before the system is filled, flushed and sealed it
should be on a vacuum pump overnight.

If your problems are electrical that is much easier to deal with. Also,
don't brush and disturb those evaporator and condenser coils. If they
clog up you either need filters or something to keep the gunk out, but
if you have to clean them use compressed air.

The problem is with clogged ac condensate drain. I know, it happens. But
by me ir happens incredibly often

I've had that with fridges, and solved it by putting copper wire down
the drain tube & leaving it in place. It inhibits mould, and is easily
wiggled to clear any blockage.

You can even take out and put back-in the wire to clean it.