W
WCECS 2008
Guest
CFP: IAENG International Conference on Industrial Engineering (ICINDE
2010)
From: IAENG - International Association of Engineers
Draft Manuscript submission deadline: 8 December, 2009
Camera-Ready papers & Pre-registration deadline: 10 January, 2010
ICINDE 2010: 17-19 March, 2010
http://www.iaeng.org/IMECS2010/ICINDE2010.html
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-17012-8-2). Revised and expanded version of the selected
papers may be included as book chapters in the standalone edited books
under the framework of cooperation between Springer, America Institute
of Physics and IAENG. The abstracts will be indexed and available at
major academic databases. The accepted papers will also be considered
for publication in the special issues of the journal Engineering
Letters, in IAENG journals and in edited books. For reference, the
recent IAENG post conference edited books include titles like for
example: Trends in Intelligent Systems and Computer Engineering,
Advances in Communication Systems and Electrical Engineering, and
Advances in Industrial Engineering and Operations Research by
Springer.
The conference is held under the International MultiConference of
Engineers and Computer Scientists 2010. The IMECS 2010 is organized by
the International Association of Engineers (IAENG), a non-profit
international association for the engineers and the computer
scientists. The conference has the focus on the frontier topics in the
theoretical and applied engineering and computer science subjects. The
IMECS conferences serve as good platforms for our members and the
entire engineering community to meet with each other and to exchange
ideas. Our IMECS committees have been formed with over two hundred and
sixty committees members who are mainly research center heads, faculty
deans, department heads, professors, and research scientists from over
30 countries. The last IMECS 2008 has attracted more than one thousand
participants from over 50 countries.
The topics of the ICINDE'10 include, but not limited to, the
following:
Engineering Physiology
Biomedical Instrumentation
Engineering Statistics
Quality Management Systems
Maintenance Engineering
Reliability and Quality Control
Engineering Experimental Design
Integrated Product Engineering
Engineering Risk and Decision Analysis
Computer Supported Collaborative Engineering
Human Factors and Ergonomics
Computer-Aided Design
Computer Aided Manufacturing
Computer Simulation Methods
Facilities Design and Logistics
Manufacturing Processes and Methods
Information Systems for the Manufacturing
Quality and Productivity Management
Optimization Methods
Intelligent Engineering Systems
Engineering Management and Leadership
ICINDE Conference Co-Chairs and Committee Members:
Prof. Basim Al-Najjar
Professor of Terotechnology (Systemekonomi)
Chairman of the Centre of Industrial Competitiveness (CIC)
School of Technology and Design, Vaxjo University, Sweden
Dr. N. Alagumurthi
Assistant Professor, Department of Mechanical Engineering, Pondicherry
Engineering College, India
Prof. Ali Allahverdi
Professor, Department of Industrial and Management Systems Eng.,
Kuwait University, Kuwait
Dr. Ioannis Angeli
Lecturer, Department of Mechanical Engineering & Materials Science and
Engineering, Cyprus University of Technology, Cyprus
Dr. Chan Ching-Yuen
Lecturer, Department of Industrial & Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
Dr. Danny SK Chan (co-chair)
Lecturer, Department of Industrial and Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
Dr. Alan Hoi-shou Chan (co-chair)
Associate Professor, Department of Manufacturing Engineering and
Engineering Management
President of the Hong Kong Ergonomics Society (2003-2005)
City University of Hong Kong, Hong Kong
Dr. Qi Chao
Research scientist, Singapore-MIT Alliance, Nanyang Technological
University, Singapore
Dr. Tsung-Hui Chen
Assistant Professor, Department of Marketing and Logistics
Management,
National Pingtung Institute of Commerce, Taiwan
Dr. Yee-Ming Chen
Associate Professor, Dept. of Industrial Engineering
Yuan Ze University, Taiwan
Dr. Gang (Gary) Feng
Associate Professor, Department of Manufacturing Engineering and
Engineering Management (MEEM)
Associate editor, IEEE Trans. on Fuzzy Systems
City University of Hong Kong, Hong Kong
Prof. Heung Suk Hwang (co-chair)
Chair Professor, Department of Port & Logistics System, College of
Port & Logistics, TongMyong University, South Korea
Former President of Korea Institute of Industrial Engineering, KIIE,
and
the Editor-in-Chief of International Journal of Industrial Engineering
and Management Systems
Dr. Ralph W.L. IP
Executive Director of Fongs Research Centre for Advanced Mechanical
Systems,
Honorary Associate Professor in the Department of Mechanical
Engineering,
University of Hong Kong, Hong Kong
Prof. Shigekazu Ishihara
Department of Kansei Design, Faculty of Psychological Science
Hiroshima International University, Japan
Dr. Ajai Jain
Assistant Professor, Mechanical Engineering Department, National
Institute of Technology, India
Prof. Limin Jia
Chair Professor, School of Traffic and Transportation,
Beijing Jiaotong University, China
Dr. Voratas Kachitvichyanukul
Associate Professor, Industrial Engineering & Management,
School of Engineering and Technology, Asian Institute of Technology,
THAILAND
Dr. Wen-Hung Kuo (co-chair)
Associate Professor, Department of Information Management
National Formosa University, Taiwan
Prof. Ho Woo Lee
Professor of Industrial Engineering and Systems Management
Engineering, Sungkyunkwan University, South Korea
Dr. Yun-Chia Liang
Associate Professor, Department of Industrial Engineering &
Management, Yuan Ze University, Taiwan
Dr. Chuar-yuan Lin
Associate Professor, Department of Industrial Engineering and
Technology Management
Da-Yeh University, Taiwan
Dr. Chiung Moon (co-chair)
Associate Professor, Department of Information & Industrial
Engineering,
Yonsei University, Seoul, South Korea
Area Editor of the Journal of Industrial Engineering & Management
Systems
Dr. S. Ayse Ozel
Assistant Professor, Department of Industrial Engineering,
Engineering and Architecture Faculty, Uludag University, Turkey
Dr. C.S.P.Rao
Associate Professor, Mechanical Engineering Department, National
Institute of Technology, India
Prof. Susumu Saito
The Institute for Science of Labour, Japan
President, Japan Ergonomics Society
Dr. Rosemary R. Seva
Chair, Department of Industrial Engineering, De La Salle University,
Philippines
Prof. V. Soundararajan
Professor & Head, Department of Mechanical Engineering, Pondicherry
Engineering College, India
Dr. Ali Riza Yildiz
Researcher, Department of Mechanical Engineering, University of
Michigan, USA
Dr. K.C. Winco Yung (co-chair)
Associate Professor, PhD
Centre-in-Charge, PCB Technology Center
Associate Director, AMT Research Center, Department of Industrial and
Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
ICINDE'10 Special session 1: Human Factors and Ergonomics
Special session chair:
Dr. Alan Hoi-shou Chan
Associate Professor, Department of Manufacturing Engineering and
Engineering Management
City University of Hong Kong, Hong Kong
ICINDE'10 Special session 2: Organizational Learning
Special session chair:
Dr. Kong Bieng Chuah
Associate Professor, Department of Manufacturing Engineering and
Engineering Management
City University of Hong Kong, Hong Kong
========Submission:
IMECS 2010 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to imecs{at}iaeng.org by 8 December, 2009. The
submitted file can be in MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the congress. The conferences have
enjoyed high reputation among many research colleagues ( for example,
see the http://cs.conference-ranking.net/ or http://www.conference-ranking.com/
or http://www.conference-ranking.org/cs.html ).
More details about the IMECS 2010 can be found at:
http://www.iaeng.org/IMECS2010/index.html
More details about the International Association of Engineers, and the
IAENG International Journal of Computer Science, and the IAENG
International Journal of Applied Mathematics can be found at:
http://www.iaeng.org/about_IAENG.html
http://www.iaeng.org/IJCS/index.html
http://www.iaeng.org/IJAM/index.html
The official journal web site of Engineering Letters at:
http://www.engineeringletters.com
http://www.engineeringletters.net
http://www.engineeringletter.com
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.
2010)
From: IAENG - International Association of Engineers
Draft Manuscript submission deadline: 8 December, 2009
Camera-Ready papers & Pre-registration deadline: 10 January, 2010
ICINDE 2010: 17-19 March, 2010
http://www.iaeng.org/IMECS2010/ICINDE2010.html
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-17012-8-2). Revised and expanded version of the selected
papers may be included as book chapters in the standalone edited books
under the framework of cooperation between Springer, America Institute
of Physics and IAENG. The abstracts will be indexed and available at
major academic databases. The accepted papers will also be considered
for publication in the special issues of the journal Engineering
Letters, in IAENG journals and in edited books. For reference, the
recent IAENG post conference edited books include titles like for
example: Trends in Intelligent Systems and Computer Engineering,
Advances in Communication Systems and Electrical Engineering, and
Advances in Industrial Engineering and Operations Research by
Springer.
The conference is held under the International MultiConference of
Engineers and Computer Scientists 2010. The IMECS 2010 is organized by
the International Association of Engineers (IAENG), a non-profit
international association for the engineers and the computer
scientists. The conference has the focus on the frontier topics in the
theoretical and applied engineering and computer science subjects. The
IMECS conferences serve as good platforms for our members and the
entire engineering community to meet with each other and to exchange
ideas. Our IMECS committees have been formed with over two hundred and
sixty committees members who are mainly research center heads, faculty
deans, department heads, professors, and research scientists from over
30 countries. The last IMECS 2008 has attracted more than one thousand
participants from over 50 countries.
The topics of the ICINDE'10 include, but not limited to, the
following:
Engineering Physiology
Biomedical Instrumentation
Engineering Statistics
Quality Management Systems
Maintenance Engineering
Reliability and Quality Control
Engineering Experimental Design
Integrated Product Engineering
Engineering Risk and Decision Analysis
Computer Supported Collaborative Engineering
Human Factors and Ergonomics
Computer-Aided Design
Computer Aided Manufacturing
Computer Simulation Methods
Facilities Design and Logistics
Manufacturing Processes and Methods
Information Systems for the Manufacturing
Quality and Productivity Management
Optimization Methods
Intelligent Engineering Systems
Engineering Management and Leadership
ICINDE Conference Co-Chairs and Committee Members:
Prof. Basim Al-Najjar
Professor of Terotechnology (Systemekonomi)
Chairman of the Centre of Industrial Competitiveness (CIC)
School of Technology and Design, Vaxjo University, Sweden
Dr. N. Alagumurthi
Assistant Professor, Department of Mechanical Engineering, Pondicherry
Engineering College, India
Prof. Ali Allahverdi
Professor, Department of Industrial and Management Systems Eng.,
Kuwait University, Kuwait
Dr. Ioannis Angeli
Lecturer, Department of Mechanical Engineering & Materials Science and
Engineering, Cyprus University of Technology, Cyprus
Dr. Chan Ching-Yuen
Lecturer, Department of Industrial & Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
Dr. Danny SK Chan (co-chair)
Lecturer, Department of Industrial and Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
Dr. Alan Hoi-shou Chan (co-chair)
Associate Professor, Department of Manufacturing Engineering and
Engineering Management
President of the Hong Kong Ergonomics Society (2003-2005)
City University of Hong Kong, Hong Kong
Dr. Qi Chao
Research scientist, Singapore-MIT Alliance, Nanyang Technological
University, Singapore
Dr. Tsung-Hui Chen
Assistant Professor, Department of Marketing and Logistics
Management,
National Pingtung Institute of Commerce, Taiwan
Dr. Yee-Ming Chen
Associate Professor, Dept. of Industrial Engineering
Yuan Ze University, Taiwan
Dr. Gang (Gary) Feng
Associate Professor, Department of Manufacturing Engineering and
Engineering Management (MEEM)
Associate editor, IEEE Trans. on Fuzzy Systems
City University of Hong Kong, Hong Kong
Prof. Heung Suk Hwang (co-chair)
Chair Professor, Department of Port & Logistics System, College of
Port & Logistics, TongMyong University, South Korea
Former President of Korea Institute of Industrial Engineering, KIIE,
and
the Editor-in-Chief of International Journal of Industrial Engineering
and Management Systems
Dr. Ralph W.L. IP
Executive Director of Fongs Research Centre for Advanced Mechanical
Systems,
Honorary Associate Professor in the Department of Mechanical
Engineering,
University of Hong Kong, Hong Kong
Prof. Shigekazu Ishihara
Department of Kansei Design, Faculty of Psychological Science
Hiroshima International University, Japan
Dr. Ajai Jain
Assistant Professor, Mechanical Engineering Department, National
Institute of Technology, India
Prof. Limin Jia
Chair Professor, School of Traffic and Transportation,
Beijing Jiaotong University, China
Dr. Voratas Kachitvichyanukul
Associate Professor, Industrial Engineering & Management,
School of Engineering and Technology, Asian Institute of Technology,
THAILAND
Dr. Wen-Hung Kuo (co-chair)
Associate Professor, Department of Information Management
National Formosa University, Taiwan
Prof. Ho Woo Lee
Professor of Industrial Engineering and Systems Management
Engineering, Sungkyunkwan University, South Korea
Dr. Yun-Chia Liang
Associate Professor, Department of Industrial Engineering &
Management, Yuan Ze University, Taiwan
Dr. Chuar-yuan Lin
Associate Professor, Department of Industrial Engineering and
Technology Management
Da-Yeh University, Taiwan
Dr. Chiung Moon (co-chair)
Associate Professor, Department of Information & Industrial
Engineering,
Yonsei University, Seoul, South Korea
Area Editor of the Journal of Industrial Engineering & Management
Systems
Dr. S. Ayse Ozel
Assistant Professor, Department of Industrial Engineering,
Engineering and Architecture Faculty, Uludag University, Turkey
Dr. C.S.P.Rao
Associate Professor, Mechanical Engineering Department, National
Institute of Technology, India
Prof. Susumu Saito
The Institute for Science of Labour, Japan
President, Japan Ergonomics Society
Dr. Rosemary R. Seva
Chair, Department of Industrial Engineering, De La Salle University,
Philippines
Prof. V. Soundararajan
Professor & Head, Department of Mechanical Engineering, Pondicherry
Engineering College, India
Dr. Ali Riza Yildiz
Researcher, Department of Mechanical Engineering, University of
Michigan, USA
Dr. K.C. Winco Yung (co-chair)
Associate Professor, PhD
Centre-in-Charge, PCB Technology Center
Associate Director, AMT Research Center, Department of Industrial and
Systems Engineering
The Hong Kong Polytechnic University, Hong Kong
ICINDE'10 Special session 1: Human Factors and Ergonomics
Special session chair:
Dr. Alan Hoi-shou Chan
Associate Professor, Department of Manufacturing Engineering and
Engineering Management
City University of Hong Kong, Hong Kong
ICINDE'10 Special session 2: Organizational Learning
Special session chair:
Dr. Kong Bieng Chuah
Associate Professor, Department of Manufacturing Engineering and
Engineering Management
City University of Hong Kong, Hong Kong
========Submission:
IMECS 2010 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to imecs{at}iaeng.org by 8 December, 2009. The
submitted file can be in MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the congress. The conferences have
enjoyed high reputation among many research colleagues ( for example,
see the http://cs.conference-ranking.net/ or http://www.conference-ranking.com/
or http://www.conference-ranking.org/cs.html ).
More details about the IMECS 2010 can be found at:
http://www.iaeng.org/IMECS2010/index.html
More details about the International Association of Engineers, and the
IAENG International Journal of Computer Science, and the IAENG
International Journal of Applied Mathematics can be found at:
http://www.iaeng.org/about_IAENG.html
http://www.iaeng.org/IJCS/index.html
http://www.iaeng.org/IJAM/index.html
The official journal web site of Engineering Letters at:
http://www.engineeringletters.com
http://www.engineeringletters.net
http://www.engineeringletter.com
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.