I
iaeng_imecs_wce_wcecs_a
Guest
Call for Papers: International Conference on Intelligent Automation
and Robotics ICIAR 2013
CFP: International Conference on Intelligent Automation and Robotics
ICIAR 2013
Draft Paper Submission Deadline: 2 July, 2013
Camera-Ready Papers Due & Registration Deadline: 30 July, 2013
WCECS 2013: San Francisco, USA, 23-25 October, 2013
http://www.iaeng.org/WCECS2013/ICIAR2013.html
The conference ICIAR'13 is held under the World Congress on
Engineering and Computer Science WCECS 2013. The WCECS 2013 is
organized by the International Association of Engineers (IAENG), a non-
profit international association for the engineers and the computer
scientists. The congress has the focus on the frontier topics in the
theoretical and applied engineering and computer science subjects. The
WCECS conferences serve as good platforms for our members and the
entire engineering community to meet with each other and to exchange
ideas. Our last IAENG conference has attracted more than one thousand
participants from over 30 countries, and our conference committees
have been formed with over two hundred and sixty committee members who
are mainly research center heads, faculty deans, department heads,
professors, and research scientists from over 20 countries.
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-19252-3-7). The abstracts will be indexed and available at
major academic databases. The accepted papers will also be considered
for publication in the special issues of the journal Engineering
Letters, in IAENG journals and in edited books. Revised and expanded
version of the selected papers may also be included as book chapters
in the standalone edited books under the framework of cooperation
between IAENG and publishers like Springer. For reference, post-
conference edited books of our recent IAENG conferences like for
example: Trends in Intelligent Systems and Computer Engineering,
Advances in Communication Systems and Electrical Engineering, Advances
in Industrial Engineering and Operations Research, Advances in
Computational Algorithms and Data Analysis, and IAENG Transactions on
Engineering Technologies etc., have been published by Springer.
The topics of the ICIAR'13 include, but not limited to, the following:
Intelligent Automation
Intelligent Control Systems
Decision support systems
Distributed control systems
Expert systems for industry
Intelligent fault detection and identification
Knowledge-based systems applications
Machine learning in control applications
Hybrid learning systems
Mechatronic systems
Neural networks based control systems
Optimization algorithms
Software agents for intelligent control systems
Soft computing
Fuzzy control
Genetic algorithms
Intelligent control agents
Evolutionary computation
Biologically inspired control systems
Autonomous agents
Petri nets (system design/verification with nets, protocols and
networks)
Industrial networks and automation
Field-buses
Real-time systems control
Environmental monitoring and control
Process control
CAD, CAM, CAE
Flexible manufacturing systems
Web-based control
Computer and microprocessor-based control
Actuators and sensors
Instrumentation networks and software
Motor control and power systems
Hydraulic and pneumatic systems
Robotics:
Robot design, development and control
Human-robots interfaces
Haptic devices
Robotic teams
Mobile robot localization, navigation and mapping
Space, underwater and inspection robots
Intelligent transportation technologies
Vehicle control applications
Telerobotics and telematics
Virtual reality
Mechatronic systems
Vision, recognition and reconstruction
Nanorobotics
Robot design, development and control
Human-robots interfaces
Network robotics
Mobile robots and autonomous systems
Human augmentation and shared control
Cybernetics
Space and underwater robots
Intelligent transportation technologies and systems
Vehicle control applications
Telerobotics and Teleoperation
Industrial networks and automation
Intelligent warehouses
Modeling, simulation and architectures
Vision, recognition and reconstruction
Image processing
Surveillance
Control and supervision systems
Web-based control
Reasoning about action for intelligent robots
Natural language dialogue with robots
ICIAR Conference Committee:
Dr. William B. Agassounon (PhD Caltech)
Principle Engineer, Autonomy and Networking group part of the
Advanced Solutions Center,
Textron Defense Systems, Advanced Solutions Center, USA
Dr. Syed Sahal Nazli Alhady
Lecturer, School of Electrical & Electronic Engineering, Universiti
Sains Malaysia, Malaysia
Prof. Jian S Dai (FIMechE; co-chair)
Chair Professor of Mechanisms and Robotics, Department of Mechanical
Engineering,
Division of Engineering, King's College London, UK
Prof. Richard J. Duro (co-chair)
Professor and Head of the Integrated Group for Engineering, Research,
University of Corunna, Spain
Prof. Ming Li
Assistant Professor, Department of Computer Science, California State
University, Fresno, USA
Dr. Raj Madhavan
Research scientist, Computational Sciences and Engineering Division of
the Oak Ridge National Laboratory;
Guest researcher, Intelligent Systems Division, National Institute of
Standards and Technology, USA ;
Founding Chair of the IEEE Washington Section Robotics & Automation
Society Chapter
Prof. Takafumi Matsumaru
Professor, Graduate School of Information, Production and Systems,
Waseda University, Japan
Prof. Rezia Molfino
Professor, PMARlab, Department of Mechanics and Machines Design,
University of Genova, Italy;
President of Italian Robotics Association
Dr. Tariq Shehab
Assistant Professor, Department of Civil Engineering, California
State University, Long Beach, USA
Dr. Cagatay Soyer (co-chair)
Principal Scientist, NATO C3 Agency, The Hague, Command and Control
Systems Division, Surveillance and Reconnaissance Resource Center,
Netherlands
Dr. Chinpei Tang
Researcher, Erik Jonsson School of Engineering and Computer Science,
The University of Texas at Dallas, USA
Prof. Jing Wang
Assistant Professor of Computer Engineering, School of Science,
Engineering, and Mathematics, Bethune-Cookman University, Daytona
Beach, USA
Prof. Miguel Ángel Sotelo Vázquez
Professor, Department of Automation, University of Alcalá, Spain
Prof. Li Zhao
Professor, Radio Department, School of Information Science and
Engineering, Southeast University, China
Dr. Matteo Zoppi
Senior Researcher, PMARlab, Department of Mechanics and Machines
Design, University of Genova, Genoa, Italy
========Submission:
WCECS 2013 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to WCECS{at}iaeng.org. The submitted file can be in
MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the WCECS congress. The conferences
have enjoyed high reputation among many research colleagues.
More details about the WCECS 2013 can be found at:
http://www.iaeng.org/WCECS2013/index.html
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.
and Robotics ICIAR 2013
CFP: International Conference on Intelligent Automation and Robotics
ICIAR 2013
Draft Paper Submission Deadline: 2 July, 2013
Camera-Ready Papers Due & Registration Deadline: 30 July, 2013
WCECS 2013: San Francisco, USA, 23-25 October, 2013
http://www.iaeng.org/WCECS2013/ICIAR2013.html
The conference ICIAR'13 is held under the World Congress on
Engineering and Computer Science WCECS 2013. The WCECS 2013 is
organized by the International Association of Engineers (IAENG), a non-
profit international association for the engineers and the computer
scientists. The congress has the focus on the frontier topics in the
theoretical and applied engineering and computer science subjects. The
WCECS conferences serve as good platforms for our members and the
entire engineering community to meet with each other and to exchange
ideas. Our last IAENG conference has attracted more than one thousand
participants from over 30 countries, and our conference committees
have been formed with over two hundred and sixty committee members who
are mainly research center heads, faculty deans, department heads,
professors, and research scientists from over 20 countries.
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-19252-3-7). The abstracts will be indexed and available at
major academic databases. The accepted papers will also be considered
for publication in the special issues of the journal Engineering
Letters, in IAENG journals and in edited books. Revised and expanded
version of the selected papers may also be included as book chapters
in the standalone edited books under the framework of cooperation
between IAENG and publishers like Springer. For reference, post-
conference edited books of our recent IAENG conferences like for
example: Trends in Intelligent Systems and Computer Engineering,
Advances in Communication Systems and Electrical Engineering, Advances
in Industrial Engineering and Operations Research, Advances in
Computational Algorithms and Data Analysis, and IAENG Transactions on
Engineering Technologies etc., have been published by Springer.
The topics of the ICIAR'13 include, but not limited to, the following:
Intelligent Automation
Intelligent Control Systems
Decision support systems
Distributed control systems
Expert systems for industry
Intelligent fault detection and identification
Knowledge-based systems applications
Machine learning in control applications
Hybrid learning systems
Mechatronic systems
Neural networks based control systems
Optimization algorithms
Software agents for intelligent control systems
Soft computing
Fuzzy control
Genetic algorithms
Intelligent control agents
Evolutionary computation
Biologically inspired control systems
Autonomous agents
Petri nets (system design/verification with nets, protocols and
networks)
Industrial networks and automation
Field-buses
Real-time systems control
Environmental monitoring and control
Process control
CAD, CAM, CAE
Flexible manufacturing systems
Web-based control
Computer and microprocessor-based control
Actuators and sensors
Instrumentation networks and software
Motor control and power systems
Hydraulic and pneumatic systems
Robotics:
Robot design, development and control
Human-robots interfaces
Haptic devices
Robotic teams
Mobile robot localization, navigation and mapping
Space, underwater and inspection robots
Intelligent transportation technologies
Vehicle control applications
Telerobotics and telematics
Virtual reality
Mechatronic systems
Vision, recognition and reconstruction
Nanorobotics
Robot design, development and control
Human-robots interfaces
Network robotics
Mobile robots and autonomous systems
Human augmentation and shared control
Cybernetics
Space and underwater robots
Intelligent transportation technologies and systems
Vehicle control applications
Telerobotics and Teleoperation
Industrial networks and automation
Intelligent warehouses
Modeling, simulation and architectures
Vision, recognition and reconstruction
Image processing
Surveillance
Control and supervision systems
Web-based control
Reasoning about action for intelligent robots
Natural language dialogue with robots
ICIAR Conference Committee:
Dr. William B. Agassounon (PhD Caltech)
Principle Engineer, Autonomy and Networking group part of the
Advanced Solutions Center,
Textron Defense Systems, Advanced Solutions Center, USA
Dr. Syed Sahal Nazli Alhady
Lecturer, School of Electrical & Electronic Engineering, Universiti
Sains Malaysia, Malaysia
Prof. Jian S Dai (FIMechE; co-chair)
Chair Professor of Mechanisms and Robotics, Department of Mechanical
Engineering,
Division of Engineering, King's College London, UK
Prof. Richard J. Duro (co-chair)
Professor and Head of the Integrated Group for Engineering, Research,
University of Corunna, Spain
Prof. Ming Li
Assistant Professor, Department of Computer Science, California State
University, Fresno, USA
Dr. Raj Madhavan
Research scientist, Computational Sciences and Engineering Division of
the Oak Ridge National Laboratory;
Guest researcher, Intelligent Systems Division, National Institute of
Standards and Technology, USA ;
Founding Chair of the IEEE Washington Section Robotics & Automation
Society Chapter
Prof. Takafumi Matsumaru
Professor, Graduate School of Information, Production and Systems,
Waseda University, Japan
Prof. Rezia Molfino
Professor, PMARlab, Department of Mechanics and Machines Design,
University of Genova, Italy;
President of Italian Robotics Association
Dr. Tariq Shehab
Assistant Professor, Department of Civil Engineering, California
State University, Long Beach, USA
Dr. Cagatay Soyer (co-chair)
Principal Scientist, NATO C3 Agency, The Hague, Command and Control
Systems Division, Surveillance and Reconnaissance Resource Center,
Netherlands
Dr. Chinpei Tang
Researcher, Erik Jonsson School of Engineering and Computer Science,
The University of Texas at Dallas, USA
Prof. Jing Wang
Assistant Professor of Computer Engineering, School of Science,
Engineering, and Mathematics, Bethune-Cookman University, Daytona
Beach, USA
Prof. Miguel Ángel Sotelo Vázquez
Professor, Department of Automation, University of Alcalá, Spain
Prof. Li Zhao
Professor, Radio Department, School of Information Science and
Engineering, Southeast University, China
Dr. Matteo Zoppi
Senior Researcher, PMARlab, Department of Mechanics and Machines
Design, University of Genova, Genoa, Italy
========Submission:
WCECS 2013 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to WCECS{at}iaeng.org. The submitted file can be in
MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the WCECS congress. The conferences
have enjoyed high reputation among many research colleagues.
More details about the WCECS 2013 can be found at:
http://www.iaeng.org/WCECS2013/index.html
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.