I
IMECS 2007
Guest
Call for Papers: International Conference on Intelligent Automation
and Robotics ICIAR 2011
CFP: International Conference on Intelligent Automation and Robotics
ICIAR 2011
Draft Paper Submission Deadline: 2 July, 2011
Camera-Ready Papers Due & Registration Deadline: 30 July, 2011
WCECS 2011: San Francisco, USA, 19-21 October, 2011
http://www.iaeng.org/WCECS2011/ICIAR2011.html
The conference ICIAR'11 is held under the World Congress on
Engineering and Computer Science WCECS 2011. The WCECS 2011 is
organized by the International Association of Engineers (IAENG), a non-
profit international association for the engineers and the computer
scientists. The congress has the focus on the frontier topics in the
theoretical and applied engineering and computer science subjects. The
WCECS conferences serve as good platforms for our members and the
entire engineering community to meet with each other and to exchange
ideas. Our last IAENG conference has attracted more than one thousand
participants from over 30 countries, and our conference committees
have been formed with over two hundred and sixty committee members who
are mainly research center heads, faculty deans, department heads,
professors, and research scientists from over 20 countries.
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-18210-9-6). The abstracts will be indexed and available at
major academic databases. The accepted papers will also be considered
for publication in the special issues of the journal Engineering
Letters, in IAENG journals and in edited books. Revised and expanded
version of the selected papers may also be included as book chapters
in the standalone edited books under the framework of cooperation
between IAENG and publishers like Springer. For reference, the
following post conference edited books of our recent IAENG
conferences: Trends in Intelligent Systems and Computer Engineering,
Advances in Communication Systems and Electrical Engineering, Advances
in Industrial Engineering and Operations Research, and Advances in
Computational Algorithms and Data Analysis, have been published by
Springer.
The topics of the ICIAR'11 include, but not limited to, the
following:
Intelligent Automation
Intelligent Control Systems
Decision support systems
Distributed control systems
Expert systems for industry
Intelligent fault detection and identification
Knowledge-based systems applications
Machine learning in control applications
Hybrid learning systems
Mechatronic systems
Neural networks based control systems
Optimization algorithms
Software agents for intelligent control systems
Soft computing
Fuzzy control
Genetic algorithms
Intelligent control agents
Evolutionary computation
Biologically inspired control systems
Autonomous agents
Petri nets (system design/verification with nets, protocols and
networks)
Industrial networks and automation
Field-buses
Real-time systems control
Environmental monitoring and control
Process control
CAD, CAM, CAE
Flexible manufacturing systems
Web-based control
Computer and microprocessor-based control
Actuators and sensors
Instrumentation networks and software
Motor control and power systems
Hydraulic and pneumatic systems
Robotics:
Robot design, development and control
Human-robots interfaces
Haptic devices
Robotic teams
Mobile robot localization, navigation and mapping
Space, underwater and inspection robots
Intelligent transportation technologies
Vehicle control applications
Telerobotics and telematics
Virtual reality
Mechatronic systems
Vision, recognition and reconstruction
Nanorobotics
Robot design, development and control
Human-robots interfaces
Network robotics
Mobile robots and autonomous systems
Human augmentation and shared control
Cybernetics
Space and underwater robots
Intelligent transportation technologies and systems
Vehicle control applications
Telerobotics and Teleoperation
Industrial networks and automation
Intelligent warehouses
Modeling, simulation and architectures
Vision, recognition and reconstruction
Image processing
Surveillance
Control and supervision systems
Web-based control
Reasoning about action for intelligent robots
Natural language dialogue with robots
WCECS Congress Co-chairs
Prof. Craig Douglas ( WCECS Co-chair)
Distinguished Professor of Mathematics, University of Wyoming
Visiting Professor, Computer Science Department, Yale University, USA
Prof. Warren S. Grundfest, Fellow, AIMBE, SPIE (WCECS co-chair)
Co-Chair, Biomedical Engineering IDP
Professor of Electrical Engineering and Professor of Surgery
The Henry Samueli School of Engineering & Applied Science
University of California, Los Angeles, USA
Former Chair, SPIE Health Care Engineering & Technology Policy
Former Vice Chair, Health Care Engineering Policy Committee, IEEE
Prof. Jon Burgstone (ICIMT honorary co-chair)
Faculty Chair
Center for Entrepreneurship & Technology
College of Engineering
University of California, Berkeley, USA
Board Member of the Rock Center for Entrepreneurship at Harvard
Business School, Harvard University
Prof. Benjamin Friedlander, FIEEE (ICIART honorary co-chair)
Professor of Electrical Engineering
Department of Electrical Engineering, Jack Baskin School of
Engineering,
University of California, Santa Cruz, USA
The IEEE Third Millennium Medal (2000)
Former Vice Chairman of the Bay Area Chapter of the Acoustics, Speech
and Signal Processing Society
Former Associate Editor of the IEEE Transaction on Automatic Control
Prof. Burghard B. Rieger (ICMLDA honorary co-chair)
Professor of Computational Linguistics
Former Dean (1999-2001) of Faculty of Languages and Literature
Former Head of Department of Linguistic Computing, University of
Trier, Germany
President (1989-93) of the German Society for Linguistic Computing
(GLDV)
Vice-President (1990-94) of the International Society for Terminoly
and Knowledge Engineering (GTW)
Prof. Lei Xu (ICSCA honorary co-chair)
IEEE Fellow and IAPR Fellow,
Member of European Academy of Sciences,
Chair Professor, Department of Computer Science and Engineering,
The Chinese University of Hong Kong, Hong Kong
=========
Submission:
WCECS 2011 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to WCECS{at}iaeng.org by 2 July, 2011. The
submitted file can be in MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the WCECS congress. The conferences
have enjoyed high reputation among many research colleagues.
More details about the WCECS 2011 can be found at:
http://www.iaeng.org/WCECS2011/index.html
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.
and Robotics ICIAR 2011
CFP: International Conference on Intelligent Automation and Robotics
ICIAR 2011
Draft Paper Submission Deadline: 2 July, 2011
Camera-Ready Papers Due & Registration Deadline: 30 July, 2011
WCECS 2011: San Francisco, USA, 19-21 October, 2011
http://www.iaeng.org/WCECS2011/ICIAR2011.html
The conference ICIAR'11 is held under the World Congress on
Engineering and Computer Science WCECS 2011. The WCECS 2011 is
organized by the International Association of Engineers (IAENG), a non-
profit international association for the engineers and the computer
scientists. The congress has the focus on the frontier topics in the
theoretical and applied engineering and computer science subjects. The
WCECS conferences serve as good platforms for our members and the
entire engineering community to meet with each other and to exchange
ideas. Our last IAENG conference has attracted more than one thousand
participants from over 30 countries, and our conference committees
have been formed with over two hundred and sixty committee members who
are mainly research center heads, faculty deans, department heads,
professors, and research scientists from over 20 countries.
All submitted papers will be under peer review and accepted papers
will be published in the conference proceeding (ISBN:
978-988-18210-9-6). The abstracts will be indexed and available at
major academic databases. The accepted papers will also be considered
for publication in the special issues of the journal Engineering
Letters, in IAENG journals and in edited books. Revised and expanded
version of the selected papers may also be included as book chapters
in the standalone edited books under the framework of cooperation
between IAENG and publishers like Springer. For reference, the
following post conference edited books of our recent IAENG
conferences: Trends in Intelligent Systems and Computer Engineering,
Advances in Communication Systems and Electrical Engineering, Advances
in Industrial Engineering and Operations Research, and Advances in
Computational Algorithms and Data Analysis, have been published by
Springer.
The topics of the ICIAR'11 include, but not limited to, the
following:
Intelligent Automation
Intelligent Control Systems
Decision support systems
Distributed control systems
Expert systems for industry
Intelligent fault detection and identification
Knowledge-based systems applications
Machine learning in control applications
Hybrid learning systems
Mechatronic systems
Neural networks based control systems
Optimization algorithms
Software agents for intelligent control systems
Soft computing
Fuzzy control
Genetic algorithms
Intelligent control agents
Evolutionary computation
Biologically inspired control systems
Autonomous agents
Petri nets (system design/verification with nets, protocols and
networks)
Industrial networks and automation
Field-buses
Real-time systems control
Environmental monitoring and control
Process control
CAD, CAM, CAE
Flexible manufacturing systems
Web-based control
Computer and microprocessor-based control
Actuators and sensors
Instrumentation networks and software
Motor control and power systems
Hydraulic and pneumatic systems
Robotics:
Robot design, development and control
Human-robots interfaces
Haptic devices
Robotic teams
Mobile robot localization, navigation and mapping
Space, underwater and inspection robots
Intelligent transportation technologies
Vehicle control applications
Telerobotics and telematics
Virtual reality
Mechatronic systems
Vision, recognition and reconstruction
Nanorobotics
Robot design, development and control
Human-robots interfaces
Network robotics
Mobile robots and autonomous systems
Human augmentation and shared control
Cybernetics
Space and underwater robots
Intelligent transportation technologies and systems
Vehicle control applications
Telerobotics and Teleoperation
Industrial networks and automation
Intelligent warehouses
Modeling, simulation and architectures
Vision, recognition and reconstruction
Image processing
Surveillance
Control and supervision systems
Web-based control
Reasoning about action for intelligent robots
Natural language dialogue with robots
WCECS Congress Co-chairs
Prof. Craig Douglas ( WCECS Co-chair)
Distinguished Professor of Mathematics, University of Wyoming
Visiting Professor, Computer Science Department, Yale University, USA
Prof. Warren S. Grundfest, Fellow, AIMBE, SPIE (WCECS co-chair)
Co-Chair, Biomedical Engineering IDP
Professor of Electrical Engineering and Professor of Surgery
The Henry Samueli School of Engineering & Applied Science
University of California, Los Angeles, USA
Former Chair, SPIE Health Care Engineering & Technology Policy
Former Vice Chair, Health Care Engineering Policy Committee, IEEE
Prof. Jon Burgstone (ICIMT honorary co-chair)
Faculty Chair
Center for Entrepreneurship & Technology
College of Engineering
University of California, Berkeley, USA
Board Member of the Rock Center for Entrepreneurship at Harvard
Business School, Harvard University
Prof. Benjamin Friedlander, FIEEE (ICIART honorary co-chair)
Professor of Electrical Engineering
Department of Electrical Engineering, Jack Baskin School of
Engineering,
University of California, Santa Cruz, USA
The IEEE Third Millennium Medal (2000)
Former Vice Chairman of the Bay Area Chapter of the Acoustics, Speech
and Signal Processing Society
Former Associate Editor of the IEEE Transaction on Automatic Control
Prof. Burghard B. Rieger (ICMLDA honorary co-chair)
Professor of Computational Linguistics
Former Dean (1999-2001) of Faculty of Languages and Literature
Former Head of Department of Linguistic Computing, University of
Trier, Germany
President (1989-93) of the German Society for Linguistic Computing
(GLDV)
Vice-President (1990-94) of the International Society for Terminoly
and Knowledge Engineering (GTW)
Prof. Lei Xu (ICSCA honorary co-chair)
IEEE Fellow and IAPR Fellow,
Member of European Academy of Sciences,
Chair Professor, Department of Computer Science and Engineering,
The Chinese University of Hong Kong, Hong Kong
=========
Submission:
WCECS 2011 is now accepting manuscript submissions. Prospective
authors are invited to submit their draft paper in full paper (any
appropriate style) to WCECS{at}iaeng.org by 2 July, 2011. The
submitted file can be in MS Word format, PS format, or PDF formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to
should be stated in the email.
It is our target that the reviewing process and the result
notification for each submitted manuscript can be completed within one
month from its submission. The reviewing process is to ensure the
quality of the accepted papers in the WCECS congress. The conferences
have enjoyed high reputation among many research colleagues.
More details about the WCECS 2011 can be found at:
http://www.iaeng.org/WCECS2011/index.html
********
It will be highly appreciated if you can circulate these calls for
papers to your colleagues.