L
lixiaoyao
Guest
Hi all
I followed the step in
http://www.ece.umd.edu/%7Edilli/research/layout/cadencetutorial/printabletutorial/cadencedemo3.html
and
when I try to simulate, they always report the simulation unsucessful.
I tried it twice and it seems to be I do not have mosfet model api06p
in my library, it is so weird, please help me out and I appreciate it.
questions1: where to know the model for your mosfet?
question2: after you set up your library, can you still change the
model of your previous posfet? If can, how to?
question3: how to export the log file into text, I can not copy the
log file in the icfb-log, so I have to copy the following text line by
line, is there a way to copy the totally log file into a text file?
Thanks a lot.
Here is the log,
Simulating `raw/test2' on y.glue.umd.edu at 10:06:14 PM, Sat Apr 14,
2007.
Error found by spectre in `test_g1', during circuit read-in.
Error found by spectre in `test_g1', during circuit read-in.
raw/test2: m3 is an instance of an undefined model ami06pN.
raw/test2: m2 is an instance of an undefined model ami06pN.
raw/test2: m1 is an instance of an undefined model ami06pP.
raw/test2: m0 is an instance of an undefined model ami06pP.
*Error*
Spectre returned status 512
elapsed time 45 S
simulation unsuccessful,
Use Simulation->Output Log for more information
....unsuccessful.
*WARNING* Form 'schObjPropForm', field 'w_grid': Bad value "16".
Must be an integer.
nmos (instance "M3", library "NCSU_Analog_Parts")
*WARNING* Form 'schObjPropForm', field 'w_grid': Bad value "10".
Must be an integer.
This is the first object.
This is the last object.
CheckMicronSizeCB: Length is not a number. Use the variable "" to set
this property
CheckMicronSizeCB: Width is not a number. Use the variable "" to set
this property
pmos (instance "M0", library "NCSU_Analog_Parts")
pmos (instance "M1", library "NCSU_Analog_Parts")
nmos (instance "M2", library "NCSU_Analog_Parts")
nmos (instance "M3", library "NCSU_Analog_Parts")
I followed the step in
http://www.ece.umd.edu/%7Edilli/research/layout/cadencetutorial/printabletutorial/cadencedemo3.html
and
when I try to simulate, they always report the simulation unsucessful.
I tried it twice and it seems to be I do not have mosfet model api06p
in my library, it is so weird, please help me out and I appreciate it.
questions1: where to know the model for your mosfet?
question2: after you set up your library, can you still change the
model of your previous posfet? If can, how to?
question3: how to export the log file into text, I can not copy the
log file in the icfb-log, so I have to copy the following text line by
line, is there a way to copy the totally log file into a text file?
Thanks a lot.
Here is the log,
Simulating `raw/test2' on y.glue.umd.edu at 10:06:14 PM, Sat Apr 14,
2007.
Error found by spectre in `test_g1', during circuit read-in.
Error found by spectre in `test_g1', during circuit read-in.
raw/test2: m3 is an instance of an undefined model ami06pN.
raw/test2: m2 is an instance of an undefined model ami06pN.
raw/test2: m1 is an instance of an undefined model ami06pP.
raw/test2: m0 is an instance of an undefined model ami06pP.
*Error*
Spectre returned status 512
elapsed time 45 S
simulation unsuccessful,
Use Simulation->Output Log for more information
....unsuccessful.
*WARNING* Form 'schObjPropForm', field 'w_grid': Bad value "16".
Must be an integer.
nmos (instance "M3", library "NCSU_Analog_Parts")
*WARNING* Form 'schObjPropForm', field 'w_grid': Bad value "10".
Must be an integer.
This is the first object.
This is the last object.
CheckMicronSizeCB: Length is not a number. Use the variable "" to set
this property
CheckMicronSizeCB: Width is not a number. Use the variable "" to set
this property
pmos (instance "M0", library "NCSU_Analog_Parts")
pmos (instance "M1", library "NCSU_Analog_Parts")
nmos (instance "M2", library "NCSU_Analog_Parts")
nmos (instance "M3", library "NCSU_Analog_Parts")