cadence ic5141

J

Jan

Guest
Hi I am pretty new to Cadence Administration. We have encountered the
following problems to which I found no suited solution yet. Our OS is
CentOS 4.7 (x86_64).

Everytime I click right on any view in the Cadence Library Manager the
Library Manager crashes with the following error message:

X Error of failed request BadWindow (invalid window parameter)
Major opcode of failed request: 38 (X_QueryPointer)
Resource id in failed request: 0x25
Serial number of failed request: 83739
Current serial number in output stream: 83739

It is posible to open any view by double clicking onto it but then it
opens in read-only mode (not a big problem cause you can make it
editable by clicking on Design - Make editable or press control + O).
But now we want to use Verilog-A views and if you open them by
doubleclicking they are read-only and there is no way to make them
editable.

Open the Verilog-A views with control + O gives the following error
message:

WARNING editFile: X Error of failed request: BadAtom (invalid Atom
parameter)
Major opcode of failed request: 20 (X_GetProperty)
Atom id in failed request 0x48
Serial number of failde request 20
Current serial number in output stream: 20

No clue...

The CDS.log file shows some Warnings:

loading vars from /opt/cadence/PROJECT/env/cdsenv for tool schematic
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewString',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlPrintCommand',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInoutPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'schHdlVerbose',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInputPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNoHierarchy',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewCheck',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlEditAfterError',
in tool[.partition] 'schematic' - it has not been registered.
Loading icc.cxt
loading vars from ./cdsenv for tool asimenv
*WARNING* envSetVal: Can't set the value of variable 'overlay',
in tool[.partition] 'asimenv.plotting' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable
'printNotation'
in tool[.partition] 'asimenv.userPref'
*WARNING* envSetVal: Can't set the value of variable 'printNotation',
in tool[.partition] 'asimenv.userPref' - it has not been registered.
loading vars from /opt/cadence/PROJECT/env/cdsenv for tool calculator
loading vars from ./cdsenv for tool calculator
*WARNING* envSetVal: Can't set the value of variable 'value2',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'nth1',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable 'type2'
in tool[.partition] 'calculator.delay'
*WARNING* envSetVal: Can't set the value of variable 'type2',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'value1',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'nth2',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable 'type1'
in tool[.partition] 'calculator.delay'
*WARNING* envSetVal: Can't set the value of variable 'type1',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'theta1',
in tool[.partition] 'calculator.riseTime' - it has not been
registered.
*WARNING* envSetVal: Can't set the value of variable 'theta2',
in tool[.partition] 'calculator.riseTime' - it has not been
registered.
*WARNING* envSetVal: Can't set the value of variable 'theta1',
in tool[.partition] 'calculator.slewRate' - it has not been
registered.
*WARNING* envSetVal: Can't set the value of variable 'theta2',
in tool[.partition] 'calculator.slewRate' - it has not been
registered.
loading vars from ./cdsenv for tool ddserv
loading vars from ./cdsenv for tool graphic
loading vars from ./cdsenv for tool layout
*WARNING* envSetVal: Can't set the value of variable
'trlnPtsToTaper',
in tool[.partition] 'layout' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable
'guidedPathRoutingBoundary'
in tool[.partition] 'layout'
*WARNING* envSetVal: Can't set the value of variable
'guidedPathRoutingBoundary',
in tool[.partition] 'layout' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'guidedPathMaintainConnections',
in tool[.partition] 'layout' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'guidedPathCreate',
in tool[.partition] 'layout' - it has not been registered.
loading vars from ./cdsenv for tool layoutXL
*WARNING* envSetVal: Can't set the value of variable 'alignMethod',
in tool[.partition] 'layoutXL' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'alignSeparation',
in tool[.partition] 'layoutXL' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'alignApplySeparation',
in tool[.partition] 'layoutXL' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'alignDirection',
in tool[.partition] 'layoutXL' - it has not been registered.
Virtuoso XL: ignoredParams is a deprecated environment variable and
will be removed in a future release.
Use paramsToIgnore instead.
*WARNING* envSetVal: Can't set the value of variable 'alignLayer',
in tool[.partition] 'layoutXL' - it has not been registered.
Virtuoso XL: ignoreNames is a deprecated environment variable and
will be removed in a future release.
Use propsUsedToIgnoreObjs instead.
*WARNING* envCyclicStringToIndex: could not find variable
'rowSTDInitOrient'
in tool[.partition] 'layoutXL.placement'
*WARNING* envSetVal: Can't set the value of variable
'rowSTDInitOrient',
in tool[.partition] 'layoutXL.placement' - it has not been
registered.
*WARNING* envCyclicStringToIndex: could not find variable
'rowMOSInitOrient'
in tool[.partition] 'layoutXL.placement'
*WARNING* envSetVal: Can't set the value of variable
'rowMOSInitOrient',
in tool[.partition] 'layoutXL.placement' - it has not been
registered.
loading vars from ./cdsenv for tool schematic
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewString',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlPrintCommand',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInoutPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'schHdlVerbose',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInputPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNoHierarchy',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewCheck',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlEditAfterError',
in tool[.partition] 'schematic' - it has not been registered.

and

*WARNING* Please check your Cadence installation. Invalid search
paths: ("/opt/cadence/ic5141/tools.lnx86/dfII/local")

I am grateful for any help.

Thanks in advance
Jan
 
Some comments interspersed below:

Jan wrote, on 01/26/09 15:35:
Hi I am pretty new to Cadence Administration. We have encountered the
following problems to which I found no suited solution yet. Our OS is
CentOS 4.7 (x86_64).
Click to expand...
Well, this is an unsupported OS (i.e. Cadence do no testing on it), so caveat
emptor.

Everytime I click right on any view in the Cadence Library Manager the
Library Manager crashes with the following error message:

X Error of failed request BadWindow (invalid window parameter)
Major opcode of failed request: 38 (X_QueryPointer)
Resource id in failed request: 0x25
Serial number of failed request: 83739
Current serial number in output stream: 83739
Click to expand...
I remember seeing this years ago with fvwm as my window manager - it was OK (if
my memory is correct) if I used the middle mouse button.

What window manager are you using? Most likely it's a bug in the window manager...

It is posible to open any view by double clicking onto it but then it
opens in read-only mode (not a big problem cause you can make it
editable by clicking on Design - Make editable or press control + O).
But now we want to use Verilog-A views and if you open them by
doubleclicking they are read-only and there is no way to make them
editable.
Click to expand...
Most likely, you've got the following cdsenv setting somewhere:

cdsLibManager.main dblClickEditCellView boolean nil

The default is t.


Open the Verilog-A views with control + O gives the following error
message:

WARNING editFile: X Error of failed request: BadAtom (invalid Atom
parameter)
Major opcode of failed request: 20 (X_GetProperty)
Atom id in failed request 0x48
Serial number of failde request 20
Current serial number in output stream: 20
Click to expand...
Again, bad window manager, bad OS maybe?

No clue...

The CDS.log file shows some Warnings:
Click to expand...
Ditch the old cdsenv. It's full of obsolete cdsenv variables from older releases
(IC446 and earlier) - hence the many warnings.

loading vars from /opt/cadence/PROJECT/env/cdsenv for tool schematic
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewString',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlPrintCommand',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInoutPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'schHdlVerbose',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInputPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNoHierarchy',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewCheck',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlEditAfterError',
in tool[.partition] 'schematic' - it has not been registered.
Loading icc.cxt
loading vars from ./cdsenv for tool asimenv
*WARNING* envSetVal: Can't set the value of variable 'overlay',
in tool[.partition] 'asimenv.plotting' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable
'printNotation'
in tool[.partition] 'asimenv.userPref'
*WARNING* envSetVal: Can't set the value of variable 'printNotation',
in tool[.partition] 'asimenv.userPref' - it has not been registered.
loading vars from /opt/cadence/PROJECT/env/cdsenv for tool calculator
loading vars from ./cdsenv for tool calculator
*WARNING* envSetVal: Can't set the value of variable 'value2',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'nth1',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable 'type2'
in tool[.partition] 'calculator.delay'
*WARNING* envSetVal: Can't set the value of variable 'type2',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'value1',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'nth2',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable 'type1'
in tool[.partition] 'calculator.delay'
*WARNING* envSetVal: Can't set the value of variable 'type1',
in tool[.partition] 'calculator.delay' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'theta1',
in tool[.partition] 'calculator.riseTime' - it has not been
registered.
*WARNING* envSetVal: Can't set the value of variable 'theta2',
in tool[.partition] 'calculator.riseTime' - it has not been
registered.
*WARNING* envSetVal: Can't set the value of variable 'theta1',
in tool[.partition] 'calculator.slewRate' - it has not been
registered.
*WARNING* envSetVal: Can't set the value of variable 'theta2',
in tool[.partition] 'calculator.slewRate' - it has not been
registered.
loading vars from ./cdsenv for tool ddserv
loading vars from ./cdsenv for tool graphic
loading vars from ./cdsenv for tool layout
*WARNING* envSetVal: Can't set the value of variable
'trlnPtsToTaper',
in tool[.partition] 'layout' - it has not been registered.
*WARNING* envCyclicStringToIndex: could not find variable
'guidedPathRoutingBoundary'
in tool[.partition] 'layout'
*WARNING* envSetVal: Can't set the value of variable
'guidedPathRoutingBoundary',
in tool[.partition] 'layout' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'guidedPathMaintainConnections',
in tool[.partition] 'layout' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'guidedPathCreate',
in tool[.partition] 'layout' - it has not been registered.
loading vars from ./cdsenv for tool layoutXL
*WARNING* envSetVal: Can't set the value of variable 'alignMethod',
in tool[.partition] 'layoutXL' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'alignSeparation',
in tool[.partition] 'layoutXL' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'alignApplySeparation',
in tool[.partition] 'layoutXL' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'alignDirection',
in tool[.partition] 'layoutXL' - it has not been registered.
Virtuoso XL: ignoredParams is a deprecated environment variable and
will be removed in a future release.
Use paramsToIgnore instead.
*WARNING* envSetVal: Can't set the value of variable 'alignLayer',
in tool[.partition] 'layoutXL' - it has not been registered.
Virtuoso XL: ignoreNames is a deprecated environment variable and
will be removed in a future release.
Use propsUsedToIgnoreObjs instead.
*WARNING* envCyclicStringToIndex: could not find variable
'rowSTDInitOrient'
in tool[.partition] 'layoutXL.placement'
*WARNING* envSetVal: Can't set the value of variable
'rowSTDInitOrient',
in tool[.partition] 'layoutXL.placement' - it has not been
registered.
*WARNING* envCyclicStringToIndex: could not find variable
'rowMOSInitOrient'
in tool[.partition] 'layoutXL.placement'
*WARNING* envSetVal: Can't set the value of variable
'rowMOSInitOrient',
in tool[.partition] 'layoutXL.placement' - it has not been
registered.
loading vars from ./cdsenv for tool schematic
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewString',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlPrintCommand',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInoutPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable 'schHdlVerbose',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNetToInputPort',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlNoHierarchy',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlCrossViewCheck',
in tool[.partition] 'schematic' - it has not been registered.
*WARNING* envSetVal: Can't set the value of variable
'schHdlEditAfterError',
in tool[.partition] 'schematic' - it has not been registered.

and

*WARNING* Please check your Cadence installation. Invalid search
paths: ("/opt/cadence/ic5141/tools.lnx86/dfII/local")
Click to expand...
Sorry, I've not seen this one before.

I am grateful for any help.

Thanks in advance
Jan
Click to expand...
Best Regards,

Andrew.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top