Cable interface for HP 54120A/B to 54121a test set.

[Don W]

Does anyone know where I can find an interface cable for the HP 54120A/B Mainframe oscilloscope.
The interface cable attaches a test set such as a 54121a. AFAIK HP no longer manufactures the cables.

The interface looks like one of the older Centronix SCSI connectors. Does anyone know what the
pinout on the cable is, or where to find it?

Also--looking for 54120t or 54121t HP original manuals. I've got Xerox copies from Manuals Plus,
but would like to find the printed copies or someone that has them in PDF form.

Thanks,

Don W.

 

[Jorgen Lund-Nielsen]

Don W schrieb:

Hi Jorgen,

Thanks for your post. I suspected that the cables might be straight through, but thought it better
to find specs, than to end up messing up my units. I bought a 54120B, and a 54121a (20Ghz) test set
through Ebay, and they came without the cable. Now I'm trying to get them working together so that
I can use the set to test some Microwave equipement that I'm designing.

How do you like your 54124t set? Have you used it up through its max bandwidth (50Ghz)?

Don W.

Hello Don,

i like that scope very, but til now i havn't used the
Very High Bandwidth Inputs.
Mostly used the TDR and the other 3.5mm Input.
I hope for you that the units are all OK and no input is blown,
this could be very expensive...
How much have you paied at ebay for those fine pices?

Jorgen

Jorgen Lund-Nielsen wrote:
Don W schrieb:

Does anyone know where I can find an interface cable for the HP 54120A/B Mainframe oscilloscope.
The interface cable attaches a test set such as a 54121a. AFAIK HP no longer manufactures the cables.

The interface looks like one of the older Centronix SCSI connectors. Does anyone know what the
pinout on the cable is, or where to find it?

Also--looking for 54120t or 54121t HP original manuals. I've got Xerox copies from Manuals Plus,
but would like to find the printed copies or someone that has them in PDF form.

Thanks,

Don W.


Hi Don,

i've just disconnect the cable that connects my HP 54120B with
the 54124A Test Set.
I have measured Pin for Pin and they are connectet straightforward,
Pin 1 is connected to Pin 1 ; Pin 2 to Pin 2 and so on and so on.
I have opened one Connector and have looked inside,
it's just a ordinary 50 pole gray flat 3M Ribbon cable, exept it's
screened, but it looks like the screen is hand made by HP,
wrapped around copper mesh which is connected to the metal housing
of the plug.
It looks to me that you can build your own cable by using
those 50 pole cable and plugs, and to wrap around some kind of
screen, i think that will work.
I hope that helps you a bit,

Jorgen
dj0ud


For direct reply please remove all the " x " in the mail adress.