D
Daniel
Guest
Hi there,
I tried to connect my LPT1 with a digilab 2e board by using a parallel
4 cable (JTAG).
I startet IMPACT and the automatically boundary scan. But I'm always
received this message:
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (COM1 Port).
Cable connection failed.
Cable connection failed.
Cable connection failed.
Cable connection failed.
CB_PROGRESS_END - End Operation.
Elapsed time = 28 sec.
Cable autodetection failed.
GUI --- Switch to File Mode
I tried to use the same cable with a laptop and it works. I checked my
LPT1 Port with a printer and the port works ok.
The Port in the Bios is set to ECP. The drivers "windrvr.sys" and
"xpc4drvr.sys" are in the system32/driver directory. I checked the
fliset.txt and install.log, both are ok. I installed Xilinx 6.1.03i
again. I installed the sevicepack 4. Between the installing were some
error messages. The software can't copy some files.
I'm using a PC from DELL with windows2000.
I don't know what i can do now, please help me.
Daniel
I tried to connect my LPT1 with a digilab 2e board by using a parallel
4 cable (JTAG).
I startet IMPACT and the automatically boundary scan. But I'm always
received this message:
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
Driver windrvr.sys version = 5.0.5.1.
Installing WinDriver...
Failed.
Service using windrvr.sys : SYSTEMCurrentControlSetServicesWinDriver.
ImagePath = SystemRootSystem32driverswindrvr.sys.
DisplayName = WinDriver.
Start = 2.
ErrorControl = 1.
Type=1.
Cable connection failed.
Connecting to cable (COM1 Port).
Cable connection failed.
Cable connection failed.
Cable connection failed.
Cable connection failed.
CB_PROGRESS_END - End Operation.
Elapsed time = 28 sec.
Cable autodetection failed.
GUI --- Switch to File Mode
I tried to use the same cable with a laptop and it works. I checked my
LPT1 Port with a printer and the port works ok.
The Port in the Bios is set to ECP. The drivers "windrvr.sys" and
"xpc4drvr.sys" are in the system32/driver directory. I checked the
fliset.txt and install.log, both are ok. I installed Xilinx 6.1.03i
again. I installed the sevicepack 4. Between the installing were some
error messages. The software can't copy some files.
I'm using a PC from DELL with windows2000.
I don't know what i can do now, please help me.
Daniel