ByteBlaster fails on Windows 98

Y

Yuri Tregubov

Guest
Dear colleagues,

The ByteBlaster works fine with MaxPlus 9.4 / Windows 95 but fails
with MaxPlus 10.2 / Windows 98.

"Unrecognized device or socket is empty"

Any clue ?

Nordic regards,
Yuri
 
Yuri Tregubov wrote:

Dear colleagues,

The ByteBlaster works fine with MaxPlus 9.4 / Windows 95 but fails
with MaxPlus 10.2 / Windows 98.

"Unrecognized device or socket is empty"

Any clue ?

Nordic regards,
Yuri
There is a new driver, the ByteBlaster II, which I found I needed for MaxPlus 10.2 on Windows 2000. I don't know whether Windows 98 is supported or not. It was a royal pain to find the driver, install it, and get it working. There's probably a FAQ somewhere to cover this information step-by-step but I don't know where it is.
Click to expand...

Charles B. Cameron
 
Yuri Tregubov wrote:

Dear colleagues,

The ByteBlaster works fine with MaxPlus 9.4 / Windows 95 but fails
with MaxPlus 10.2 / Windows 98.

"Unrecognized device or socket is empty"

Any clue ?
Click to expand...
I'm sure my home-made version of the Byte Blaster worked OK with Win98
SE. It works OK with WinME. Both with MaxPlus 10.2.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html
 
Il 3 Feb 2004 04:49:32 -0800, ytregubov@yahoo.com (Yuri Tregubov) ha
scritto:

Dear colleagues,

The ByteBlaster works fine with MaxPlus 9.4 / Windows 95 but fails
with MaxPlus 10.2 / Windows 98.

"Unrecognized device or socket is empty"

Any clue ?
Click to expand...
my home made byteblaster and byteblasterMV work fine, with MaxPlus
10.2 / Windows 98 on an old Dell laptop.

SB
---------------------------------------------------
togli i caratteri accentati per rispondere via mail
 
ytregubov@yahoo.com (Yuri Tregubov) wrote in message news:<9d3de6a0.0402030449.1f0fcf0d@posting.google.com>...
The ByteBlaster works fine with MaxPlus 9.4 / Windows 95 but fails
with MaxPlus 10.2 / Windows 98.

"Unrecognized device or socket is empty"
Click to expand...
Isn't this an error message for the MPU programmer?
Are you sure you are configured to use a ByteBlaster?
(in the Options/Hardware Setup menu)

Alan Nishioka
alann@accom.com
 
Dear friends,

Could your check and then post your BIOS LPT port settings for me ?

Thank you in advance,
Yuri
 
Yuri Tregubov wrote:

Dear friends,

Could your check and then post your BIOS LPT port settings for me ?
Click to expand...
I just dug out my home-made ByteBlaster clone and an old Flex10K10 board
of mine and checked that they still worked with MaxPlus 10.2.
Configuration with a simple test function worked OK. I'm using WinME
with the port configured for EPP operation.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html
 
Leon Heller <aqzf13@dsl.pipex.com> wrote in message news:<40220c16$0$21303$cc9e4d1f@news.dial.pipex.com>...
Yuri Tregubov wrote:

Dear friends,

Could your check and then post your BIOS LPT port settings for me ?

I just dug out my home-made ByteBlaster clone and an old Flex10K10 board
of mine and checked that they still worked with MaxPlus 10.2.
Configuration with a simple test function worked OK. I'm using WinME
with the port configured for EPP operation.
Click to expand...
Further to the above, I'm actually using an ISA EPP parallel port card
for the ByteBlaster. The motherboard parallel port is connected to my
printer. I use the EPP port for other devices like Xilinx and ARM JTAG
interfaces.
 
"Cameron, Charles B. " <cameronc@aplcenmp.apl.jhu.edu> wrote in message news:<401FA202.5050300@aplcenmp.apl.jhu.edu>...
Yuri Tregubov wrote:

Dear colleagues,

The ByteBlaster works fine with MaxPlus 9.4 / Windows 95 but fails
with MaxPlus 10.2 / Windows 98.

"Unrecognized device or socket is empty"

Any clue ?

Nordic regards,
Yuri
There is a new driver, the ByteBlaster II, which I found I needed for MaxPlus 10.2 on Windows 2000. I don't know whether Windows 98 is supported or not. It was a royal pain to find the driver, install it, and get it working. There's probably a FAQ somewhere to cover this information step-by-step but I don't know where it is.

Charles B. Cameron
Click to expand...

Check out http://www.altera.com/support/software/drivers/dri-index.html

Seshan
Altera Corp
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top