Building a circuit without a pcb

[Pete]

I have drawn a schematic for a circuit, but am having difficulty in
converting it to a board layout using stripboard rather than producing a
pcb.

There are several pieces of software out there that can convert from
schematic to pcb - but not to a stripboard layout.

The use of the opamps seems to complicate matters with not using a pcb.

Does anyone know of any software to help - or give me some pointers on the
board layout.

i have posted the schematic in alt.binaries.schematics.electronics.

thanks in advance!

 

[Pete]

Thanks for the link!

Just what I am looking for. I would have expected more programes around like
this, and not be hard to find link stripboard magic.

There are two links to the utility "Stripboard Magic" on
this site - just scroll down until you hit them. On the way
there however, make sure that you read what the self-
confessed computer scientist has to say about software and
creativity.

 

[Joe McElvenney]

Hi,

There are two links to the utility "Stripboard Magic" on
this site - just scroll down until you hit them. On the way
there however, make sure that you read what the self-
confessed computer scientist has to say about software and
creativity.


http://members.lycos.co.uk/interele...op=getit&lid=18

or here :

http://web.archive.org/web/20030502...pboardMagic.zip


Routing is one thing but good layout is another.


Cheers - Joe

 

[Paul_Morphy]

"Joe McElvenney" <ximac@btinternet.com> wrote in message
news:VA.000000ad.002c044f@btinternet.com...

http://members.lycos.co.uk/interele...op=getit&lid=18

or here :

http://web.archive.org/web/20030502...pboardMagic.zip

Both links are giving 404s now...

73,

"PM"

 

[Joe McElvenney]

Hi,

Both links are giving 404s now...

Sorry about that - they were both up and running when I
posted them.


Cheers - Joe

 

[Rich Grise]

"Joe McElvenney" <ximac@btinternet.com> wrote in message
news:VA.000000ae.000fc355@btinternet.com...

Hi,


Both links are giving 404s now...


Sorry about that - they were both up and running when I
posted them.

When you posted them, did they have that ellipsis in the middle?

 

[cpemma]

Rich Grise wrote:

"Joe McElvenney" <ximac@btinternet.com> wrote in message
news:VA.000000ae.000fc355@btinternet.com...
Hi,


Both links are giving 404s now...


Sorry about that - they were both up and running when I
posted them.

When you posted them, did they have that ellipsis in the middle?

Try

http://members.lycos.co.uk/interelektronik/modules.php?name=Downloads&d_op=MostPopular

Was there 2 seconds ago

It's abandonware, a bit of a grey area which is probably why more sites
don't have it.
--
Home Rule for Yorkshire