Breadman Repair?

[dale allen]

Our bread maker has quit. It tumbles the bread and sometimes raises it, but
does not bake it. I have checked the element and it is not open. Any ideas?
Thank
you,

Dale

 

[James Sweet]

"dale allen" <radiodale@worldnet.att.net> wrote in message
news:AHqIb.566355$0v4.22863278@bgtnsc04-news.ops.worldnet.att.net...

Our bread maker has quit. It tumbles the bread and sometimes raises it,
but
does not bake it. I have checked the element and it is not open. Any
ideas?
Thank
you,

Dale

How's the soldering on the relay pins? If it looks ok have you checked to
see if the relay engages? You should hear a click when the element turns on.

 

[Sam Goldwasser]

"James Sweet" <jamessweet@hotmail.com> writes:

How's the soldering on the relay pins? If it looks ok have you checked to
see if the relay engages? You should hear a click when the element turns on.

There is probably a thermal fuse in series with the element. Check
that as well (though its failure wouldn't likely cause erratic operation).

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: The email address in this message header may no longer work. To
contact me, please use the feedback form on the S.E.R FAQ Web sites.